1. Introdución e finalview
The Cooler Master XG650 Plus Platinum ARGB is a fully modular 650W power supply unit designed for high-performance computing systems. It features an 80 PLUS Platinum certification for high efficiency, a 135mm silent fan, and a built-in digital display panel for real-time monitoring of performance data. This unit incorporates 100% Japanese capacitors for enhanced reliability and meets Intel ATX 12V version 2.53 guidelines.
Características principais:
- In-House Platform Design: Engineered for high-end performance with reduced temperature requirements.
- ARGB Fans with Digital Side Panel: Monitor real-time performance data including fan speed, temperature, power load, and customize ARGB lighting.
- 80 PLUS Platinum Certified: Guarantees a minimum typical efficiency of 92% under normal operating conditions.
- Quiet 135mm Fan: Fluid dynamic fan bearing for low RPM operations and quiet cooling performance.
- Smart Thermal Control Mode: Fan remains inactive until the unit reaches 50% load, ensuring silent operation during normal use.
- Condensadores 100 % xaponeses: Used in both the platform and cables for increased efficiency and reduced ripple noise.
- Cableado totalmente modular: Reduces cable clutter, improves airflow, and enhances overall efficiency and thermal performance.

Figure 1.1: The Cooler Master XG650 Plus Platinum ARGB 650W Power Supply Unit.
2. Configuración e instalación
2.1 Precaucións de seguridade
- Always disconnect the power cord from the wall outlet before installing or removing the power supply.
- Asegúrese de conectar a terra adecuada para evitar descargas eléctricas.
- Do not open the power supply unit casing. Alto volumetages están presentes dentro.
- Instale a fonte de alimentación nunha zona ben ventilada.
2.2 Contido do paquete
Verifica que estean presentes todos os compoñentes:
- Cooler Master XG650 Plus Platinum ARGB PSU
- Modular Cable Set (ATX 24-pin, EPS 4+4 pin, EPS 8 pin, PCIe 6+2 pin, SATA, Peripheral 4 pin)
- Cable de alimentación de CA
- Parafusos de montaxe
- Manual de usuario (este documento)
2.3 Instalación física
- Montaxe da fonte de alimentación: Secure the power supply into the designated PSU bay in your computer case using the provided mounting screws. Ensure the fan is oriented correctly for optimal airflow (typically facing downwards or upwards depending on case design).
- Conexión de cables modulares: Identify the necessary cables for your motherboard, CPU, graphics card(s), and storage devices. Connect these cables to the corresponding ports on the PSU.

Figura 2.1: Portos de conexión de cable modular na fonte de alimentación.
- Motherboard Connections: Connect the 24-pin ATX power cable to your motherboard. Connect the 4+4 pin or 8-pin EPS cable(s) to the CPU power connector(s) on your motherboard.
- Graphics Card Connections: Connect the appropriate PCIe 6+2 pin cables to your graphics card(s).
- Almacenamento e periféricos: Connect SATA power cables to your SSDs/HDDs and other SATA-powered devices. Use Peripheral 4-pin cables for other compatible devices.
- USB Protocol Cable: Connect the included USB protocol cable from the PSU to an available USB 2.0 header on your motherboard. This enables software control and display panel functionality.
- Potencia CA: Once all internal connections are made, connect the AC power cord to the PSU and then to a wall outlet.

Figura 2.2: Máisview of included modular cables and their lengths.
3. Instrucións de funcionamento
3.1 Acendido
After completing the installation, ensure the power switch on the back of the PSU is in the 'ON' position. Power on your computer system as usual.
3.2 Digital Display Panel
The XG650 Plus Platinum features a built-in digital display panel that provides real-time information about the PSU's operation. This display can show:
- Velocidade do ventilador (RPM)
- Temperatura (°C)
- Power Load (W)
- Customized ARGB Lighting effects

Figure 3.1: The ARGB digital display panel on the PSU.
3.3 MasterPlus+ Software Control
For advanced monitoring and customization of the ARGB lighting and fan behavior, install the Cooler Master MasterPlus+ software. This software allows you to:
- Monitor PSU performance data in detail.
- Adjust ARGB lighting effects and colors.
- Configure fan curves or activate Smart Thermal Control Mode.
Download the latest MasterPlus+ software from the official Cooler Master websitio: www.coolermaster.com/downloads/

Figure 3.2: MasterPlus+ software interface for monitoring and control.
3.4 Smart Thermal Control Mode
The PSU features a Smart Thermal Control Mode where the 135mm fan will remain inactive (0 RPM) until the power load reaches 50%. This ensures silent operation during low to moderate system usage. Once the load exceeds 50%, the fan will automatically activate and adjust its speed to maintain optimal temperatures.

Figure 3.3: The quiet 135mm fan with ARGB lighting.
4. Mantemento
Proper maintenance ensures the longevity and optimal performance of your power supply unit.
- Mantéñase limpo: Periodically clean the exterior of the PSU and the fan grille to prevent dust buildup. Use compressed air to gently remove dust from the fan blades and internal components (do not open the casing).
- Asegurar o fluxo de aire: Make sure there is adequate airflow around the PSU. Avoid blocking the intake or exhaust vents.
- Xestión de cables Good cable management not only improves aesthetics but also enhances airflow within your PC case, contributing to better cooling for all components, including the PSU.
5 Solución de problemas
If you encounter issues with your Cooler Master XG650 Plus Platinum ARGB PSU, refer to the following troubleshooting steps:
5.1 Sen enerxía
- Comproba as conexións de alimentación: Ensure the AC power cord is securely plugged into both the PSU and the wall outlet. Verify the power switch on the PSU is in the 'ON' position.
- Conexións internas: Double-check all modular cables are firmly connected to both the PSU and your components (motherboard, CPU, GPU).
- Enchufe de parede: Proba a toma de corrente con outro dispositivo para asegurarte de que subministra corrente.
- Botón de acendido da placa base: Ensure your case's power button is correctly connected to the motherboard.
5.2 O ventilador non xira
- Control térmico intelixente: Remember that the fan operates in Smart Thermal Control Mode and will not spin until the PSU load reaches 50%. This is normal behavior for silent operation.
- Configuración de software: If the fan is not spinning under load, check the fan settings in the MasterPlus+ software.
- Obstáculos: Ensure there are no physical obstructions preventing the fan from spinning.
5.3 Digital Display Panel Not Working / ARGB Issues
- Conexión USB: Verify that the USB protocol cable is correctly connected from the PSU to a USB 2.0 header on your motherboard.
- MasterPlus+ Software: Ensure the MasterPlus+ software is installed and running. Check for any error messages or update the software to the latest version.
- Problemas do controlador: Reinstall the MasterPlus+ software and any associated drivers.
6. Especificacións

Figure 6.1: Power supply rating label.
| Característica | Especificación |
|---|---|
| Marca | Cooler Master |
| Serie | XG650 Plus Platinum ARGB |
| Número de modelo | MPG-6501-AFBAP-XUS |
| Wattage | 650 vatios |
| Certificación 80 PLUS | Platino |
| Factor de forma | ATX |
| Modularidade | Totalmente modular |
| Tamaño do ventilador | 135 mm |
| Método de arrefriamento | Aire |
| Capacitores | Capacitores 100% xaponeses |
| Dimensións (L x W x H) | 6.3 x 5.91 x 3.39 polgadas (160 x 150 x 86 mm) |
| Peso | 6.54 libras (2.97 kg) |
| Vol. De entradatage | 100-240 V~ |
| Frecuencia de entrada | 50-60 Hz |
| Vol. De saídatage | +5 V, +3.3 V, +12 V, -12 V, +5 VSB |
| Dispositivos compatibles | Ordenador persoal |
7. Garantía e soporte
7.1 Información da garantía
The Cooler Master XG650 Plus Platinum ARGB PSU comes with a standard limited manufacturing warranty:
- Core Operating Products: Garantía de 10 anos desde a data de compra.
- ARGB LED: Garantía de 3 anos desde a data de compra.
Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, accidents, misuse, abuse, natural disasters, or unauthorized modifications.
7.2 Soporte técnico
For technical assistance, product inquiries, or warranty claims, please visit the official Cooler Master support websitio web ou póñase en contacto co servizo de atención ao cliente:
- Soporte de Cooler Master Websitio: www.coolermaster.com/support/
- Refer to the Cooler Master websitio web para obter información de contacto rexional.