Produto rematadoview
The GIM 4-inch Manual Bench Grinder (Model J0-9214) is a versatile tool designed for sharpening and polishing various materials. This manual grinder features a robust construction with a comfortable plastic handle for secure operation. Its design allows for easy and stable mounting on any flat work surface. Please note that this model is sold without a grinding stone, providing the flexibility to choose a stone that best suits your specific sharpening and polishing requirements.
Figura 1: Fronte view of the GIM 4-inch Manual Bench Grinder, showing the grinding spindle and mounting clamp.
Instrucións de seguridade
- Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when operating the grinder.
- Ensure the grinder is securely mounted to a stable, flat surface before use to prevent movement during operation.
- Keep hands and loose clothing away from moving parts, especially the grinding wheel.
- Do not apply excessive force to the grinding wheel; let the wheel do the work.
- Inspect the grinding stone for cracks or damage before each use. Replace damaged stones immediately.
- Manter a zona de traballo limpa e ben iluminada.
- This tool is designed for sharpening and polishing. Do not use it for purposes other than its intended use.
Configuración
- Desembalaxe: Carefully remove the grinder from its packaging. Inspect for any shipping damage.
- Montaxe:
The grinder is designed to be mounted on a flat workbench or table using its integrated clamp.
- Place the grinder on the edge of your workbench.
- Apretar o clamping screw firmly until the grinder is stable and does not wobble.
Figura 2: Lateral view illustrating the integrated clamp for mounting the grinder to a workbench.
- Grinding Stone Installation (if not pre-installed):
This model does not include a grinding stone. You will need to purchase a compatible 4-inch grinding stone separately.
- Unscrew the nut and remove the washers from the grinding spindle.
- Place the selected 4-inch grinding stone onto the spindle, ensuring it sits flush against the inner washer.
- Re-attach the outer washer and tighten the nut securely. Do not overtighten.
Instrucións de funcionamento
- Preparación:
- Asegúrese de que a amoladora estea montada de forma segura.
- Verify the grinding stone is properly installed and free of damage.
- Ponte lentes e luvas de seguridade.
- Sharpening/Polishing:
- Hold the item to be sharpened or polished firmly.
- Begin rotating the handle clockwise to spin the grinding stone.
- Gently bring the item into contact with the rotating grinding stone at the desired angle.
- Apply light, consistent pressure. Avoid pressing too hard, as this can damage the stone or the item.
- Move the item evenly across the surface of the stone to ensure uniform sharpening or polishing.
- Continue until the desired sharpness or finish is achieved.
Figura 3: Arriba view showing the manual handle used to operate the grinding wheel.
- Acabado:
- Once finished, slowly stop rotating the handle.
- Carefully remove the sharpened/polished item.
Mantemento
- Limpeza: After each use, wipe down the grinder with a dry cloth to remove dust and debris. Do not use water or harsh chemicals.
- Lubricación: Periodically apply a small amount of light machine oil to the moving parts, such as the handle pivot and spindle bearings, to ensure smooth operation.
- Grinding Stone Inspection: Regularly inspect the grinding stone for wear, cracks, or uneven surfaces. A worn or damaged stone can affect performance and safety. Replace as needed.
- Almacenamento: Store the grinder in a clean, dry place away from moisture and extreme temperatures.
Figura 4: En ángulo view of the grinder, highlighting areas for cleaning and inspection.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Grinder wobbles during operation. | Not securely clamped to the workbench. | Asegúrese de que o clamping screw is fully tightened and the grinder is on a stable surface. |
| Grinding stone not spinning smoothly. | Lack of lubrication; debris in mechanism; damaged bearings. | Apply light machine oil to moving parts. Clean any visible debris. If problem persists, professional inspection may be needed. |
| Poor sharpening/polishing results. | Worn or incorrect grinding stone; incorrect technique. | Replace the grinding stone if worn. Ensure you are using the correct type of stone for the material. Review instrucións de funcionamento para a técnica axeitada. |
Especificacións
- Número de modelo: J0-9214
- Marca: GIM (Manufactured by Karlen)
- Fonte de enerxía: Manual
- Tamaño da rebarbadora: 4 inches (stone not included)
- Peso do produto: 3 kg (aproximadamente 6.6 libras)
- Dimensións do produto: 12.5 cm (L) x 12.5 cm (W) x 12.5 cm (H) (approximately 4.9 x 4.9 x 4.9 inches)
- Montaxe: cl integradoamp para superficies planas
Garantía e Soporte
Specific warranty information for the GIM 4-inch Manual Bench Grinder (Model J0-9214) is not provided in this manual. Please refer to the product packaging or contact the retailer where the product was purchased for details regarding warranty coverage.
For technical support or inquiries, please visit the official GIM brand store on Amazon or contact their customer service.
Visit GIM Store on Amazon
