1. Produto rematadoview
The oneisall X2 Cat Clipper is designed for efficient and quiet pet grooming, especially for cats with matted or thick hair. It features a low-noise motor, ceramic and titanium blades, and a long-lasting battery for cordless operation.
Image: The oneisall X2 Cat Clipper, a cordless grooming tool.
- Funcionamento silencioso: Designed with a low-noise motor (less than 50 dB) to minimize pet anxiety during grooming.
- Motor potente: Two-speed settings (5500 rpm and 6000 rpm) for effective cutting through various hair types.
- Láminas duradeiras: Ceramic and titanium blades offer sharpness and longevity, preventing rust and dullness.
- Batería de longa duración: 3-hour charge provides up to 300 minutes of cordless use, with an LCD display for battery status.
- Kit completo de aseo: Includes 6 guide combs (3mm, 6mm, 9mm, 12mm, 15mm, 18mm), cleaning brush, maintenance oil, and scissors.
2. Información de seguridade
- Avoid contact with eyes and face.
- Prevent your pet from ingesting or inhaling small parts.
- Limpar o dispositivo completamente despois de cada uso.
- Este produto debe usarse baixo a supervisión dun adulto.
- Always handle blades with care to prevent injury.
- Non mergullo a cortadora na auga.
3. Configuración e carga
Before first use, ensure the clipper is fully charged. The LCD display will indicate the charging status.
- Cargar a cortadora: Connect the clipper to a power source using the provided USB cable. Charge for 3 hours before the first use. The LCD screen will show battery percentage.
- Coloque a lámina: Ensure the ceramic and titanium blade is securely screwed onto the clipper.
- Select Guide Comb (Optional): Choose the desired guide comb (3mm, 6mm, 9mm, 12mm, 15mm, or 18mm) and attach it firmly to the blade for specific hair lengths.
Image: The clipper displaying battery charge levels on its LCD screen.
Image: The clipper shown with six different guide combs for varying hair lengths.
4. Instrucións de funcionamento
Follow these steps for effective and safe grooming of your pet.
- Prepara a túa mascota: Ensure your pet is calm and comfortable. Brush their fur to remove loose hair and tangles before clipping.
- Turn On and Select Speed: Press the power button to turn on the clipper. Select the desired speed (5500 rpm or 6000 rpm) using the speed adjustment switch.
- Begin Clipping: Guide the clipper smoothly over your pet's fur.
- Trim along the cat's back hair.
- Carefully trim the cat's tail hair.
- Trim the cat's belly hair, being mindful of sensitive areas.
- Trim the hair around the cat's hindquarters.
- Trim the hair on the cat's legs and paws.
- Consider creating a "lion-cut" style if desired, by leaving fur on the head, paws, and tail tip.
- Observe Pet's Reaction: If your pet shows signs of distress, take a break and resume when they are calmer. The low noise design helps reduce anxiety.
- Cordless or Corded Use: The clipper can be used wirelessly after charging or while connected to the power supply.
Image: A cat being groomed with the oneisall X2 clipper, highlighting its quiet operation.
Image: The clipper effectively cutting through matted hair, demonstrating its powerful performance.
Image: Step-by-step guide on grooming different parts of a cat's body with the clipper.
Video: Demonstration of the oneisall X2 Cat Clipper in use, showing its effectiveness on matted hair and quiet operation.
5. Mantemento e Limpeza
Un mantemento axeitado garante a lonxevidade e o rendemento da súa cortadora de pelo.
- Limpar despois de cada uso: Use the provided cleaning brush to remove hair from the blades and inside the clipper head.
- Aceite as láminas: Apply a few drops of the maintenance oil to the blades after cleaning to keep them lubricated and sharp.
- Almacenar correctamente: Store the clipper in a dry, safe place away from children and pets.
- Lámina desmontable: The ceramic blade is detachable for easy cleaning and replacement.
Image: The detachable ceramic blade, illustrating ease of cleaning and maintenance.
6 Solución de problemas
If you encounter issues with your oneisall X2 Cat Clipper, refer to the following common problems and solutions:
| Problema | Causa posible | Solución |
|---|---|---|
| Clipper non se acende | Batería baixa ou sen carga | Charge the clipper for 3 hours. Check the LCD display for battery level. |
| Clipper pulling hair or cutting poorly | Blades are dull, dirty, or not properly oiled | Clean the blades thoroughly and apply maintenance oil. Ensure blades are securely attached. Consider replacing blades if dull. |
| Ruído ou vibración excesivos | Hair caught in the motor or loose blade | Turn off the clipper and carefully remove any trapped hair. Ensure the blade is securely attached. |
| Clipper not holding a charge | Degradación da batería | Contact customer support for assistance or battery replacement options. |
7. Especificacións
| Característica | Detalle |
|---|---|
| Número de modelo | X2 |
| Dimensións do produto (L x W x H) | 19 x 22 x 6.5 cm |
| Peso | 600 gramos |
| Tipo de batería | Ión de litio (1 pila AA incluída) |
| Tempo de carga | 3 horas |
| Tempo de funcionamento | Ata 300 minutos (5 horas) |
| Nivel de ruído | Menos de 50 dB |
| Material da lámina | Metal and Ceramic (Titanium blades) |
| Configuración de velocidade | 2 speeds (5500 rpm, 6000 rpm) |
| Características especiais | Rechargeable, Cordless, Silent Design, LCD Display |
| Certificacións | FCC, CE, UKCA |
Imaxe: Detallada view of the clipper with its dimensions and key specifications.
8. Garantía e soporte
oneisall is committed to providing high-quality products and customer satisfaction.
- Garantía: Este produto vén cunha garantía de 2 anos.
- Atención ao cliente: For any questions, concerns, or support needs, please contact our 24-hour customer service.
- Recursos en liña: Visit the official oneisall brand store for additional product information and support: oneisall Brand Store.
