Información importante de seguridade
Please read this instruction manual carefully before installing or operating your Brilliant Dody Outdoor Wall Light. Keep this manual for future reference. Improper installation or use can lead to electric shock, fire, or other hazards.
- Ensure the power supply is disconnected before installation, maintenance, or bulb replacement.
- Se non tes dúbidas sobre o cableado eléctrico, a instalación debe ser realizada por un electricista cualificado.
- This product is designed for outdoor use with an IP44 rating, providing protection against splashing water.
- Non exceda a potencia máximatage especificado para a lámpada.
Contido do paquete
Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:
- 1 x Brilliant Dody Outdoor Wall Light fixture
- Mounting material (screws, wall plugs)
- Manual de instrucións
Nota: A lámpada E27 non está incluída e debe mercarse por separado.
Configuración e instalación
- Prepare a zona de instalación: Choose a suitable wall location for mounting. The recommended mounting height for optimal motion detection is 1.8 meters. Ensure the power supply to the installation area is switched off at the main circuit breaker.
- Marcar os puntos de perforación: Hold the light fixture against the wall at the desired mounting height. Mark the positions for the drilling holes using a pencil.
- Perforación: Drill holes at the marked positions. Insert the provided wall plugs into the drilled holes.
- Conectar cableado: Carefully connect the electrical wires from your mains supply to the terminal block inside the light fixture. Ensure correct polarity (Live, Neutral, Earth). If you are unsure, consult a qualified electrician.
- Montar o aparello: Secure the light fixture to the wall using the provided screws. Ensure it is firmly attached.
- Instala a lámpada: Insert an E27 bulb (max 20W, LED compatible) into the lamp holder. Ensure the bulb is securely screwed in.
Imaxe: Fronte view of the Brilliant Dody Outdoor Wall Light, showing its sleek black and white design. This image illustrates the overall appearance of the fixture before installation.
Image: Close-up of the top section of the Brilliant Dody Outdoor Wall Light, highlighting the white diffuser and black trim. This view helps in understanding the bulb housing area.
Instrucións de funcionamento
The Brilliant Dody Outdoor Wall Light features an integrated motion detector for automatic operation. After installation, restore power to the fixture.
Motion Detector Settings:
The motion sensor has adjustable settings for 'TIME' and 'LUX'. These controls are typically located on the sensor unit itself.
Imaxe: Detallada view of the motion sensor and its adjustment dials (TIME and LUX) on the Brilliant Dody Outdoor Wall Light. This image shows where to find and adjust the sensor settings.
- HORA: This dial controls how long the light remains on after motion is detected and no further motion is sensed. Rotate the dial to increase or decrease the duration.
- LUX: This dial determines the ambient light level at which the sensor becomes active. Rotate towards the sun icon for the sensor to activate in brighter conditions (daytime), or towards the moon icon for it to activate only in darker conditions (nighttime).
Área de detección:
- Ángulo de detección: 120°
- Rango de detección: Up to 8 meters on both sides, with a maximum detection range of 10 meters.
- Altura de montaxe óptima: 1.8 meters for best performance.
Mantemento
- Limpeza: To clean the fixture, ensure the power is off. Wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the stainless steel finish or plastic diffuser.
- Substitución da lámpada: Before replacing the bulb, ensure the power supply is disconnected. Allow the old bulb to cool down completely. Unscrew the old E27 bulb and replace it with a new E27 bulb (max 20W, LED compatible).
- Inspección: Inspeccione periodicamente a instalación para detectar calquera signo de danos, conexións soltas ou desgaste.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non acende. | Sen fonte de alimentación. Bombilla defectuosa. Configuración LUX incorrecta. | Comprobar o interruptor automático. Substitúe a lámpada. Adjust LUX dial towards the moon icon for darker conditions. |
| A luz permanece acesa continuamente. | Detectouse movemento constante. Incorrect TIME setting. | Ensure no objects are constantly moving in the detection zone. Axuste o dial TIME a unha duración máis curta. |
| O sensor de movemento non detecta. | Obstruction in detection path. Configuración LUX incorrecta. Sensor dirty. | Limpar calquera obstáculo. Adjust LUX dial towards the sun icon for brighter conditions, or ensure it's not set too low for current ambient light. Clean the sensor lens gently. |
Especificacións do produto
- Marca: Brillante
- Número de modelo: 1000134854
- ASIN: B0B11KYHSW
- Dimensións (L x W x H): 17 x 7.6 x 40 cm
- Peso: 490 gramos
- Material: Aceiro inoxidable
- Material de sombra: Plástico
- Cor: Negro
- Tipo de lámpada: E27 (bombilla non incluída)
- Max Wattage: 20W (LED compatible)
- Número de lámpadas: 1
- Fonte de enerxía: Cable eléctrico
- Tipo de instalación: Soporte de parede
- Característica especial: Detector de movemento
- Clasificación IP: IP44 (Protection against splashing water)
- Motion Detector Angle: 120°
- Motion Detector Range: Up to 8m (both sides), max 10m
- Altura de montaxe óptima: 1.8 m
Garantía e Soporte
Information regarding specific warranty terms and customer support for Brilliant products may vary by region and retailer. Please refer to the documentation provided at the time of purchase or visit the official Brilliant websitio web para obter información detallada sobre a garantía e os contactos de asistencia.
For technical assistance or inquiries, please contact Brilliant customer service through their official channels.