1. Información importante de seguridade
Please read this manual thoroughly before installation and operation. Keep this manual in a safe place for future reference.
- This device is designed to detect both smoke and carbon monoxide.
- A instalación debe ser realizada por un electricista cualificado se non está familiarizado coa cableaxe eléctrica.
- Do not paint the device. Paint can clog the openings and interfere with sensor operation.
- Test the alarm weekly to ensure proper function.
- Replace the 9V backup battery annually, or when the low battery warning sounds.
2. Produto rematadoview
The X-Sense XP04 is a hardwired combination smoke and carbon monoxide detector designed for comprehensive home safety. It features advanced photoelectric smoke and electrochemical CO sensors for accurate detection.
This detector is AC powered and includes a replaceable 9V battery backup, ensuring continuous monitoring even during power outages. It can be interconnected with up to 18 compatible X-Sense hardwired alarms, providing full coverage throughout your home.
Produto rematadoview Vídeo
Este vídeo ofrece unha visión xeralview of the X-Sense XP04 Hardwired Combination Detector, demonstrating its features and components.
3. Configuración e instalación
The X-Sense XP04 detector is designed for easy installation. All necessary mounting hardware is included.
Pasos de instalación:
- Prepare o lugar de montaxe: Ensure the power is off at the circuit breaker before beginning installation. Select a location in accordance with local codes and the provided guidelines.
- Instale o soporte de montaxe: Secure the mounting bracket to the ceiling or wall using the provided screws and anchor plugs.
- Conectar cableado: Connect the AC hardwired cables (black, white, red) to your household wiring. The red wire is for interconnection with other compatible alarms.
- Instalar a batería de reserva: Insert the 9V backup battery into the battery compartment.
- Attach Detector: Align the detector with the mounting bracket and twist clockwise until it locks securely into place.
- Restaurar enerxía: Turn on the power at the circuit breaker. The detector will perform a self-test.
Interconnection for Full Coverage
This detector supports interconnection with up to 18 X-Sense 2-in-1 hardwired alarms. When one interconnected alarm is triggered, all connected alarms will sound simultaneously, providing early warning throughout your home.
4. Instrucións de funcionamento
Estado do indicador LED:
- LED verde: Indica un funcionamento normal e alimentación de CA.
- LED amarelo: Indicates a fault or low battery condition.
- LED vermello: Indicates an alarm (smoke or carbon monoxide detected).
Proba da alarma:
Press and hold the 'Test/Silence' button located on the center of the detector. The alarm will sound, and the LED indicator will flash. Release the button to stop the test. Test the alarm weekly.
Silenciar a alarma:
In case of a non-emergency alarm (e.g., cooking fumes), press the 'Test/Silence' button to temporarily silence the alarm. The alarm will automatically reset after a few minutes if the air clears. If the hazard persists, the alarm will reactivate.
5. Mantemento
Substitución da batería:
The 9V backup battery should be replaced annually. When the battery is low, the detector will chirp and the yellow LED will flash. To replace the battery:
- Twist the detector counter-clockwise to remove it from the mounting bracket.
- Abra o compartimento da batería.
- Remove the old 9V battery and insert a new one, ensuring correct polarity.
- Close the battery compartment and reattach the detector to the mounting bracket by twisting clockwise.
- Test the alarm after battery replacement.
Limpeza:
Clean your detector at least once a month to remove dust and debris. Use a soft brush or a vacuum cleaner with a soft brush attachment to clean the vents and cover. Do not use water, cleaners, or solvents.
6 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Alarm chirps periodically (Yellow LED flashes) | Batería baixa | Replace the 9V backup battery. |
| Alarm sounds without apparent smoke/CO | Dust, high humidity, cooking fumes, or chemical vapors | Clean the detector, ventilate the area, or relocate if false alarms persist due to environmental factors. |
| A alarma non soa durante a proba | No power, faulty battery, or device malfunction | Check AC power, replace battery, or contact customer support if issues persist. |
| Red LED flashes, but no alarm sound | Faulty speaker or internal malfunction | Póñase en contacto co servizo de atención ao cliente para obter asistencia. |
7. Especificacións
- Marca: X-Sense
- Modelo: XP04
- Fonte de enerxía: AC (Hardwired) with 9V Battery Backup
- Dimensións do produto: 5.5" D x 5.5" W x 1.5" H
- Peso do artigo: 4.58 libras (aprox. 2.08 kg)
- Volume da alarma: 85 dB a 10 pés
- Tipo de sensor: Fotoeléctrico (fume), electroquímico (monóxido de carbono)
- Material: Policarbonato
- Interconexión: Up to 18 compatible X-Sense hardwired units
- Vida útil: Ata 10 anos
- Compoñentes incluídos: 1 × User Manual, 2 × Screws and Anchor Plugs, 1 × 9 V Backup Battery, 1 × AC Hardwired Cable, 1 × Smoke and Carbon Monoxide Alarm XP04 (per unit in pack)
8. Garantía e soporte
X-Sense provides the following support for your XP04 detector:
- Garantía de devolución do diñeiro: 60 días
- Garantía de calidade: 5 anos
- Soporte técnico: De por vida
For technical assistance, warranty claims, or further information, please visit the official X-Sense websitio ou póñase en contacto co seu departamento de atención ao cliente.
