1. Produto rematadoview
The AZZA CSAZ-280B Spectra Black is an ATX Mid Tower gaming case designed to house various computer components. It features a tempered glass side panel and a steel right panel. This manual provides instructions for the proper installation and maintenance of your computer components within this case.
Image 1.1: Front-left view of the AZZA CSAZ-280B Spectra Black case, showcasing the tempered glass side panel and the front panel design with integrated RGB lighting.
Características principais:
- Left Panel: Tempered glass with rubber mounts for secure installation.
- Right Panel: Solid steel panel.
- Motherboard Compatibility: Supports ATX, Micro-ATX, and ITX motherboards.
- Drive Bays: Up to three 2.5" drive bays and up to two 3.5" drive bays.
- Maximum CPU Cooler Height: Up to 170 mm.
- Maximum Video Card Length: Up to 290 mm.
2. Configuración e instalación de compoñentes
Follow these steps for proper installation of your computer components into the AZZA CSAZ-280B case. Ensure the system is powered off and unplugged before beginning any installation.
2.1 Front I/O Panel Connections
The top panel of the case features various input/output ports and controls for convenient access.
Imaxe 2.1: De arriba abaixo view of the case's front I/O panel, indicating the Power button, LED control button, Audio jacks (Mic and Headphone), two USB 2.0 ports, and one USB 3.0 port.
- Botón de encendido: Prema para acender ou apagar o sistema.
- Botón LED: Controls the RGB lighting effects of the case.
- Conectores de son: Separate ports for microphone and headphones.
- Portos USB 2.0: Two ports for connecting USB 2.0 devices.
- Porto USB 3.0: One port for connecting USB 3.0 devices, offering faster data transfer speeds.
2.2 Instalación da unidade
The case supports both 3.5" HDDs and 2.5" SSDs. Refer to the images below for drive bay locations.
Imaxe 2.2: Interna view showing the lower drive cage, capable of holding one 3.5" HDD or one 2.5" SSD, and an additional dedicated 3.5" HDD bay.
Imaxe 2.3: Interna view showing two dedicated 2.5" SSD mounting brackets located behind the motherboard tray.
- For 3.5" HDDs: Install drives into the designated 3.5" drive cage located at the bottom front of the case. Secure with screws.
- For 2.5" SSDs: Install drives into the dedicated 2.5" mounting brackets behind the motherboard tray or in the lower drive cage. Secure with screws.
2.3 Instalación da tarxeta gráfica
A carcasa admite tarxetas gráficas de ata 290 mm de lonxitude.
Imaxe 2.4: Interna view illustrating the maximum supported length for a video card, which is 290mm.
- Remove the necessary PCI-E slot covers from the rear of the case.
- Carefully insert the graphics card into the PCI-E slot on your motherboard.
- Fixa a tarxeta gráfica á carcasa con parafusos.
2.4 Fan Installation and Airflow
Proper fan placement ensures optimal cooling performance. The case supports various fan configurations:
- Fronte: Supports 3 x 120mm fans or 2 x 140mm fans.
- Arriba: Admite 2 ventiladores de 120 mm.
- Traseira: Admite 1 ventilador de 120 mm.
Imaxe 2.5: Interna view of the front panel, highlighting the mounting locations for up to three 120mm fans or two 140mm fans.
Imaxe 2.6: Interna view of the top panel, showing the mounting locations for up to two 120mm fans.
Imaxe 2.7: Interna view of the rear panel, indicating the mounting location for one 120mm fan.
- Identify the desired fan mounting locations (front, top, rear).
- Secure fans to the case using appropriate fan screws.
- Connect fan power cables to the motherboard or a fan controller.
2.5 Instalación da fonte de alimentación
The power supply unit (PSU) mounts at the bottom of the case.
- Slide the PSU into the designated compartment at the bottom rear of the case.
- Secure the PSU to the case using screws from the rear.
- Route power cables through the cable management cutouts to reach your components.
3. Instrucións de funcionamento
3.1 Encendido/apagado
To power on your system, press the power button located on the top I/O panel. To power off, either shut down through your operating system or press and hold the power button for several seconds.
3.2 Control LED
Use the dedicated LED button on the top I/O panel to cycle through various lighting modes and colors for the integrated RGB elements of the case.
4. Mantemento
Un mantemento regular axuda a garantir un rendemento óptimo e unha maior duración dos compoñentes do teu PC.
- Limpeza do po: Limpe periodicamente os filtros de po e os compoñentes internos con aire comprimido. Asegúrese de que o sistema estea apagado e desconectado antes de limpalo.
- Xestión de cables Ensure cables are neatly routed to prevent obstruction of airflow and to maintain a clean interior.
- Panel Care: Clean the tempered glass panel with a soft, lint-free cloth and a mild glass cleaner. Avoid abrasive materials.
5 Solución de problemas
Esta sección aborda problemas comúns cos que podes atoparte.
- O sistema non se acende:
- Verify all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected to the motherboard and components.
- Asegúrese de que o interruptor da fonte de alimentación estea na posición "ON".
- Comprobe que o cable do botón de acendido do panel frontal estea conectado correctamente ao conector do panel frontal da placa base.
- Fans Not Spinning / LEDs Not Lighting Up:
- Confirm fan power cables are properly connected to the motherboard or fan controller.
- Ensure LED cables are correctly connected to the motherboard's RGB header or the case's LED controller.
- Press the LED button on the top I/O panel to cycle through modes or turn on the lighting.
- Portos USB non funcionan:
- Check that the USB 2.0 and USB 3.0 headers from the front panel are correctly plugged into the corresponding ports on your motherboard.
- Os conectores de audio non funcionan:
- Ensure the HD Audio cable from the front panel is securely connected to the HD Audio header on your motherboard.
6. Especificacións
Detailed technical specifications for the AZZA CSAZ-280B Spectra Black case.
| Característica | Especificación |
|---|---|
| Nome do modelo | CSAZ-280B SPECTRA BLACK |
| Tipo de caso | Torre media |
| Compatibilidade da placa base | ATX, Micro-ATX, ITX |
| Material | Plástico, vidro temperado |
| Cor | Negro |
| Dimensións (L x W x H) | 19.69 x 17.32 x 9.84 polgadas |
| Peso do elemento | 11 libras |
| Compartimentos para unidades de 2.5" | Ata 3 |
| Compartimentos para unidades de 3.5" | Ata 2 |
| Altura máxima do refrigerador da CPU | 170 mm |
| Lonxitude máxima da tarxeta de vídeo | 290 mm |
| Portos de E / S dianteiros | 2 x USB 2.0, 1 x USB 3.0, Audio, Mic, Power, LED Control |
| Soporte de ventilador frontal | 3 x 120 mm ou 2 x 140 mm |
| Top Fan Support | 2 x 120 mm |
| Rear Fan Support | 1 x 120 mm |
| Montaxe da fonte de alimentación | Montaxe inferior |
7. Garantía e soporte
7.1 Política de devolución
This product is subject to a 30-day return policy for refund or replacement, as per the retailer's terms.
7.2 Soporte técnico
For technical assistance or inquiries regarding your AZZA product, please visit the official AZZA website or contact their customer support channels. You can find more information and contact details by visiting the Tenda AZZA en Amazon.
