Rabalux 3239 LED de pé Lamp Manual de usuario

1. Introdución

This manual provides comprehensive instructions for the safe assembly, operation, and maintenance of your Rabalux 3239 LED Floor Lamp. Please read this document thoroughly before use and retain it for future reference. Proper use ensures optimal performance and longevity of your product.

2. Instrucións de seguridade

Observe as seguintes precaucións de seguridade para evitar lesións ou danos ao produto:

• Before assembly or maintenance, always disconnect the lamp da fonte de alimentación principal.
• This product is designed for indoor use only. Do not expose it to moisture, direct water, or extreme temperatures.
• Asegurar o lamp colócase sobre unha superficie estable e nivelada para evitar que se volque.
• Non intente modificar o lamp or its electrical components. Any alterations may void the warranty and pose a safety risk.
• Manteña o lamp and its power cord out of reach of children and pets.
• Se o cable de alimentación está danado, debe ser substituído por un electricista cualificado para evitar riscos.
• Non cubra o lamp with any materials that could obstruct ventilation, as this may lead to overheating.

3. Contido do paquete

Verifique que todos os compoñentes estean presentes e non presenten danos ao desembalar:

• Rabalux 3239 LED de pé Lamp (main unit with integrated LED modules)
• Power cable with integrated push-button switches
• Placa base
• Assembly hardware (screws, washers, Allen key - typically pre-attached or included for base assembly)

4. Configuración e montaxe

Sigue estes pasos para montar o teu chanamp:

1. Carefully unpack all components and place them on a clean, flat, and stable surface.
2. Attach the circular base plate to the bottom of the main lamp pole. Secure it firmly using the provided screws and tools. Ensure the pole is centered and stable.
3. Position the assembled lamp in your desired location, ensuring it is on a stable, level surface and the power cord can reach an electrical outlet without being strained or creating a tripping hazard.
4. Enchufe o cable de alimentación nunha toma eléctrica estándar.

5. Instrucións de funcionamento

The Rabalux 3239 LED Floor Lamp features two independent light sources: a main uplighter and an adjustable reading light. Each light source is controlled by its own push-button switch located on the central column of the lamp.

• To turn on or off the main uplighter, press the upper push-button switch.
• To turn on or off the adjustable reading light, press the lower push-button switch.
• The reading light features a flexible arm, allowing you to adjust its direction for focused illumination.
• Nota: Este lamp is not dimmable. The light output is fixed at 3000K warm white.

6. Mantemento

To ensure the longevity and appearance of your lamp, siga estas pautas de mantemento:

• Desconecte sempre o lamp da fonte de alimentación antes da limpeza.
• Limpar o lamp's metal surfaces with a soft, dry, lint-free cloth. For glass components, use a slightly damp pano e despois seca ben.
• Do not use abrasive cleaners, solvents, or chemical agents, as these can damage the finish and electrical components.
• Os módulos LED deste lamp are integrated and are not designed to be replaced by the user. Do not attempt to open the LED housing.

7 Solución de problemas

Se tes problemas co teu lamp, consulte os seguintes problemas e solucións comúns:

• Lamp non acende:
  • Ensure the power plug is fully inserted into a functional electrical outlet.
  • Check if the wall switch (if applicable) is in the 'ON' position.
  • Verifique que o lamp's integrated push-button switches are pressed correctly.
  • Test the outlet with another appliance to confirm it is receiving power.
• Light flickers or is inconsistent:
  • Asegurar o lamp está conectado a unha fonte de alimentación estable.
  • If the issue persists, disconnect the lamp and contact customer support or a qualified electrician.
• Danos físicos:
  • Se algunha parte da lamp is damaged, especially the power cord or electrical components, discontinue use immediately and contact customer support.

8. Especificacións

Detailed technical specifications for the Rabalux 3239 LED Floor Lamp:

9. Reciclaxe e eliminación

This product is marked with the WEEE (Waste Electrical and Electronic Equipment) symbol, indicating that it should not be disposed of with general household waste.

Please dispose of this product at a designated collection point for the recycling of electrical and electronic equipment. Proper disposal helps prevent potential negative consequences for the environment and human health.

For specific information regarding the recycling of light bulbs and safe handling of broken lamps, please consult your local waste management authority or relevant environmental protection agencies.

10. Garantía e soporte

For information regarding the product warranty, please refer to the terms and conditions provided at the point of purchase or contact your retailer.

For technical assistance or further inquiries, please visit the official Rabalux website or contact their customer support department. You can also visit the Rabalux Store on Amazon para máis información.