EMOS ZM4328

EMOS ZM4328 TORI LED Ceiling Light 15W with MW Sensor Instruction Manual

Modelo: ZM4328

1. Introdución

This manual provides detailed instructions for the installation, operation, and maintenance of your EMOS ZM4328 TORI LED Ceiling Light. This 15W LED light features a microwave motion sensor, providing 1500 lumens of 4000K neutral white light. It is designed for both indoor and outdoor use, including damp environments, thanks to its IP54 rating. Please read these instructions carefully before installation and retain them for future reference.

EMOS ZM4328 TORI LED Ceiling Light with 3 Years Warranty label

Figure 1: EMOS ZM4328 TORI LED Ceiling Light with 3 Years Warranty indication.

2. Instrucións de seguridade

  • Seguridade eléctrica: A instalación debe ser realizada por un electricista cualificado de acordo coa normativa local de cableado. Asegúrese de que a subministración eléctrica estea desconectada antes da instalación ou o mantemento.
  • Voltage: This product operates on a 230V AC power supply.
  • Clasificación IP54: The light is protected against dust ingress and splashing water from any direction. This makes it suitable for damp locations and outdoor sheltered areas, but not for submersion.
  • Fonte de luz: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the light source.
  • Temperatura de funcionamento: Ensure the operating environment is within the specified temperature range to prevent damage.

3. Contido do paquete

Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:

  • 1x EMOS ZM4328 TORI LED Ceiling Light with MW Sensor
  • Mounting accessories (screws, wall plugs, foam pads)
Mounting screws, wall plugs, and foam pads for EMOS ZM4328 TORI LED Ceiling Light

Figure 2: Included mounting accessories.

4. Configuración e instalación

Siga estes pasos para a instalación correcta:

  1. Desconectar a enerxía: Antes de comezar, asegúrese de que a subministración eléctrica principal da zona de instalación estea desconectada no disyuntor.
  2. Preparar superficie de montaxe: Choose a suitable location on a ceiling or wall. The light is suitable for indoor and outdoor use, including bathrooms, hallways, kitchens, balconies, and terraces.
  3. Fixar o soporte de montaxe: Remove the mounting bracket from the back of the light fixture. Use the bracket as a template to mark drilling points on the surface. Drill holes and insert wall plugs if necessary. Secure the mounting bracket to the surface using the provided screws.
De volta view of EMOS ZM4328 TORI LED Ceiling Light showing mounting bracket

Figura 3: Traseira view with mounting bracket.

  1. Cableado: Connect the main power supply cables to the terminal block inside the light fixture. Ensure correct polarity (Live, Neutral). The terminal block is designed for secure connections.
Close-up of the wiring terminal inside the EMOS ZM4328 TORI LED Ceiling Light

Figure 4: Wiring terminal connection points.

  1. Lámpada segura: Once wiring is complete, carefully attach the light fixture to the mounting bracket, ensuring it is securely fastened.
  2. Restaurar enerxía: Switch the main power supply back on.

5. Instrucións de funcionamento

The EMOS ZM4328 TORI LED Ceiling Light features an integrated microwave motion sensor for automatic operation.

Funcionalidade do sensor de movemento

  • The microwave motion detector reacts to movement within a range of up to 6 meters.
  • Unlike traditional PIR sensors, microwave sensors can detect movement even through thin doors, window glass, or thin walls, offering broader coverage.
  • The light will automatically turn on when motion is detected and turn off after a set delay if no further motion is detected.

Adjusting Sensor Settings (DIP Switches)

The light features DIP switches to adjust sensitivity, detection range, and hold time. These switches are typically located on the side of the fixture, accessible by opening a small cover.

Close-up of DIP switches for adjusting sensor settings on EMOS ZM4328 TORI LED Ceiling Light

Figure 5: DIP switches for sensor configuration.

Refer to the markings next to the DIP switches for specific settings related to:

  • Rango de detección: Adjusts the maximum distance at which motion is detected.
  • Tempo de espera: Sets the duration the light remains on after the last detected motion.
  • Daylight Sensor (Lux Level): Determines the ambient light level at which the sensor becomes active. For example, you can set it to only activate when it's dark.

Nota: Always disconnect power before adjusting DIP switches to avoid electrical hazards.

6. Mantemento

  • Limpeza: To clean the light fixture, ensure the power is off. Use a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or diffuser.
  • Protección contra insectos: The high IP54 protection class prevents mosquitoes or flies from entering the lamp, reducing the need for internal cleaning.
  • Non hai pezas reparables polo usuario: The LED light source is integrated and not designed for user replacement. Do not attempt to open the sealed unit beyond accessing the wiring and DIP switches.

7 Solución de problemas

If you encounter issues with your EMOS ZM4328 TORI LED Ceiling Light, refer to the following common problems and solutions:

ProblemaCausa posibleSolución
A luz non acende.Sen fonte de alimentación.
Cableado incorrecto.
Daylight sensor setting too high.
Comprobe o disxuntor e a conexión de alimentación.
Verify wiring connections (Live, Neutral).
Adjust the daylight sensor (Lux) setting on the DIP switches.
A luz permanece acesa constantemente.Detectouse movemento continuo.
Hold time setting too long.
Mal funcionamento do sensor.
Asegúrese de que non haxa movemento constante na área de detección.
Adjust the hold time setting on the DIP switches to a shorter duration.
Se o problema persiste, póñase en contacto co servizo de asistencia.
Light turns on/off too frequently.Sensibilidade demasiado alta.
Detection range too wide.
Reduce the sensitivity and/or detection range using the DIP switches.
Sensor does not detect motion.Sensitivity too low.
Detection range too narrow.
Obstruction blocking sensor.
Daylight sensor setting too low (light always on).
Increase sensitivity and/or detection range via DIP switches.
Ensure no large metal objects or thick walls are directly in front of the sensor.
Adjust the daylight sensor (Lux) setting.

8. Especificacións

MarcaEMOS
Número de modeloZM4328
Dimensións (diámetro x alto)220 mm x 53 mm (approx. 8.66 in x 2.09 in)
Peso622 gramos (aprox. 1.37 libras)
Poder15 vatios
Fluxo luminoso1500 lúmenes
Temperatura da cor4000 Kelvin (branco neutro)
Índice de reproducción da cor (CRI)80
Incandescent Equivalence100 vatios
Voltage230 voltios AC
Clasificación IPIP54
MaterialAcrylonitrile Butadiene Styrene (ABS), Plastic diffuser
Características especiaisMicrowave Motion Detector, Energy-saving, Waterproof
Clase de eficiencia enerxéticaE (on new scale from 1.9.2021)
Diagram showing dimensions of EMOS ZM4328 TORI LED Ceiling Light: 220mm diameter, 53mm height

Figura 6: Dimensións do produto.

Energy efficiency label showing class E for the EMOS ZM4328 TORI LED Ceiling Light

Figure 7: Energy Efficiency Label (Class E).

9. Garantía e soporte

Garantía

This EMOS ZM4328 TORI LED Ceiling Light comes with a 3 ano de garantía desde a data de compra. Conserve o comprobante de compra para reclamacións de garantía. A garantía cobre defectos de materiais e fabricación en condicións de uso normal.

Atención ao cliente

For technical assistance, warranty claims, or any questions regarding your product, please contact your retailer or the EMOS customer service department. Contact information can typically be found on the product packaging or the official EMOS websitio.