Introdución
Thank you for choosing the Vileda Ultramax Turbo 2-in-1 Floor Mop Complete Set. This comprehensive cleaning system is designed for efficient and thorough cleaning of all hard floors. It features a telescopic handle, an innovative microfibre cover, and a bucket with a power spinner for easy wringing without bending.
This manual provides detailed instructions on how to assemble, operate, and maintain your Vileda Ultramax Turbo system to ensure optimal performance and longevity.
Contido do paquete
- Ultramax 2-in-1 Floor Mop Head
- 3-piece Telescopic Handle (extendable up to 130 cm)
- Ultramax Microfibre Mop Cover
- Ultramax Bucket with Power Spinner
Image: The complete Vileda Ultramax Turbo 2-in-1 Floor Mop system, showing the mop head, telescopic handle, and bucket with power spinner.
Configuración
- Assemble the Telescopic Handle: Connect the three sections of the telescopic handle by twisting them together until secure. Adjust the handle length to your preferred height (75-130 cm) by twisting the locking mechanism.
- Fixar o cabezal da fregona: Align the mop head with the end of the telescopic handle and push firmly until it clicks into place. Ensure it is securely fastened.
- Attach the Microfibre Cover: Lay the microfibre mop cover flat on the floor. Place the mop head onto the cover, ensuring the red clips on the mop head align with the pockets on the cover. Press down firmly until the cover is securely attached to the mop head.
Image: A person demonstrating the use of the Vileda Ultramax Turbo mop on a tiled floor, showing the assembled mop and bucket.
Image: A close-up of a foot pressing on the mop head mechanism to release or fold it for wringing.
Instrucións de funcionamento
- Fill the Bucket: Fill the Ultramax bucket with water and your preferred cleaning solution (if desired) up to the indicated maximum fill line. The bucket has a volume of 5 liters.
- Wet the Mop: Dip the mop head into the water in the bucket, ensuring the microfibre cover is fully saturated.
- Wring the Mop: Place the mop head into the power spinner section of the bucket. Press the foot pedal repeatedly to activate the spinner. The power spinner will rotate, removing excess water and dirt from the mop cover. Continue pressing until the desired moisture level is achieved for your floor type.
Image: The Vileda Ultramax mop head positioned inside the bucket's wringing mechanism, ready for spinning.
Image: A foot pressing the red pedal on the Vileda Ultramax bucket to activate the power spinner for wringing the mop.
- Mop the Floor: Begin mopping your floor. The flexible mop head allows for easy cleaning under furniture and into corners. The 2-in-1 microfibre cover is designed to remove over 99% of bacteria and viruses with just water.
- Enxágüe e repita: Periodically rinse the mop cover in the bucket and wring it out as needed to maintain cleaning effectiveness.
Image: A close-up of the Vileda mop head on a wooden floor, with a graphic indicating it removes over 99% of bacteria and viruses with water only.
Mantemento
- Cleaning the Mop Cover: The microfibre mop cover can be machine washed at up to 60°C (140°F). Do not use fabric softener or bleach. Air dry for best results.
- Cleaning the Bucket: After each use, empty the dirty water from the bucket. Rinse the bucket and power spinner thoroughly with clean water. Allow to air dry before storing.
- Almacenamento: Store the complete mop set in a dry place away from direct sunlight. The telescopic handle can be collapsed for compact storage.
Resolución de problemas
- Mop not wringing effectively: Ensure the mop head is properly seated in the power spinner. Press the foot pedal firmly and consistently. Check if the mop cover is excessively dirty and needs washing.
- A asa parece solta: Ensure all sections of the telescopic handle are twisted tightly and the locking mechanism is engaged.
- Mop cover detaches during use: Ensure the mop cover is securely clipped onto the mop head. Press down firmly on the mop head when attaching the cover.
Especificacións
| Característica | Detalle |
|---|---|
| Nome do produto | Vileda Ultramax Turbo 2-in-1 Floor Mop Complete Set |
| Número de modelo | 4023103237742 |
| Compoñentes incluídos | Telescopic handle, bucket with power spinner, microfibre cover |
| Lonxitude do mango | 75-130 cm (adjustable) |
| Mop Head Material | Microfibre (85% polyester, 15% polyamide) |
| Volume do cubo | 5 litros |
| Dimensións do produto | 19.69 x 20.08 x 11.61 polgadas |
| Peso do elemento | 5.68 libras (2.58 kg) |
| Superficies recomendadas | All hard floors, including tile |
Garantía e Soporte
Vileda products are manufactured to high-quality standards. For specific warranty information, please refer to the packaging or contact Vileda customer support in your region. Keep your proof of purchase for warranty claims.
For further assistance or inquiries, please visit the official Vileda website or contact their customer service department. Contact details can typically be found on the product packaging or Vileda's official websitio.
