JEYI I9-Seal M.2 NVMe SSD Enclosure User Manual

Introdución

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JEYI I9-Seal M.2 NVMe SSD Enclosure. This device converts an NVMe M.2 solid-state drive into a portable external storage solution with high-speed USB 3.2 Gen 2 connectivity.

Contido do paquete

Verifique que todos os elementos que se indican a continuación estean incluídos no seu paquete:

JEYI M.2 NVMe SSD Enclosure
Almofadas térmicas
Desaparafusador
USB-A to USB-C Cable (10Gbps)
USB-C to USB-C Cable (10Gbps)
Acollador

JEYI I9-Seal M.2 NVMe SSD Enclosure package contents — Image: Contents of the JEYI I9-Seal M.2 NVMe SSD Enclosure package, showing the enclosure, two cables, thermal pads, a screwdriver, and a lanyard.

Instrucións de configuración

Follow these steps to install your NVMe M.2 SSD into the JEYI I9-Seal enclosure:

Preparar o recinto: Gently slide open the enclosure to reveal the internal PCB.
Aplicar almofada térmica: Peel off the protective films from both sides of a thermal pad and carefully place it onto the NVMe SSD chip area. This aids in heat dissipation.
Insert NVMe SSD: Align your NVMe M.2 SSD (2280 form factor only) with the M-Key slot on the PCB. Insert the SSD firmly but gently into the slot at an angle.
Protexer o SSD: Once inserted, gently push down the SSD and secure it with the provided screw using the included screwdriver. Ensure the SSD is flat and securely fastened.
Pechar o recinto: Carefully slide the enclosure cover back into place until it clicks securely.

Explotou view of JEYI I9-Seal M.2 NVMe SSD Enclosure showing internal components and thermal pad placement — Image: An exploded diagram illustrating the internal structure of the enclosure, including the aluminum alloy case, heat dissipation shell, thermal pad, and screw, demonstrating how to assemble the SSD within the enclosure.

Diagram showing compatibility with M.2 2280 NVMe SSDs only — Image: A visual guide indicating that the enclosure is compatible exclusively with M.2 2280 NVMe SSDs, with other sizes (2230, 2242, 2260) marked as incompatible.

Instrucións de funcionamento

Once your NVMe SSD is securely installed, connect the enclosure to your device:

Conectar ao dispositivo: Use either the provided USB-C to USB-C cable or the USB-A to USB-C cable to connect the enclosure to a compatible USB port on your computer, smartphone, tablet, or game console.
Indicador de potencia: A small LED indicator on the enclosure will illuminate, signifying that the device is powered on and connected.
Disk Recognition: Your operating system (Windows, macOS, Linux, Android, iOS) should automatically detect the new storage device. If it's a new SSD, you may need to initialize and format it through Disk Management (Windows) or Disk Utility (macOS) before use.
Transferencia de datos: You can now perform data backup, file transfers, disk upgrades, data recovery, or use it for storage expansion. The enclosure supports USB 3.2 Gen 2 speeds up to 10Gbps.

JEYI I9-Seal M.2 NVMe SSD Enclosure connected to various devices like laptop, smartphone, and tablet — Image: The JEYI I9-Seal enclosure connected to a laptop, smartphone, and tablet, demonstrating its wide compatibility with Windows, Linux, and Mac OS 8.0 and above systems, including Thunderbolt compatibility.

Comparison of USB data transfer speeds, highlighting 10Gbps for USB 3.2 Gen 2 — Image: A graphic illustrating data transfer speeds, showing USB 2.0 at 480Mbps, USB 3.0 (USB 3.2 Gen 1) at 5Gbps, and USB 3.1 (USB 3.2 Gen 2) at 10Gbps, emphasizing the enclosure's high-speed capability for NVMe drives.

Mantemento

To ensure optimal performance and longevity of your JEYI I9-Seal enclosure:

Xestión de calor: O aluminio casing and thermal pads are designed for efficient heat dissipation. During prolonged high-speed data transfers, the enclosure may become warm to the touch. This is normal and indicates effective heat transfer from the SSD.
Limpeza: Usa un pano suave e seco para limpar o exterior da carcasa. Evita o uso de produtos de limpeza líquidos ou solventes.
Almacenamento: Cando non estea en uso, garde a carcasa nun lugar fresco e seco, lonxe da luz solar directa e de temperaturas extremas.
Coidado do cable: Handle the USB cables carefully. Avoid sharp bends or excessive pulling to prevent damage.

Resolución de problemas

Problema	Causa posible	Solución
O ordenador non detectou a carcasa.	Conexión do cable solta. SSD non instalado correctamente. SSD not initialized/formatted. Porto ou cable USB defectuoso.	Asegúrese de que os cables estean conectados de forma segura. Re-open enclosure and verify SSD is seated correctly and screwed in. Check Disk Management (Windows) or Disk Utility (macOS) to initialize and format the SSD. Proba cun porto ou cable USB diferente.
Velocidades lentas de transferencia de datos.	Connected to a slower USB port (e.g., USB 2.0). Thermal throttling due to high temperature. Limitacións de rendemento das unidades SSD.	Connect to a USB 3.2 Gen 2 (10Gbps) compatible port. Ensure thermal pads are correctly installed. Allow the enclosure to cool if it becomes excessively hot. Verify your NVMe SSD's rated speed.
Enclosure gets very hot.	Normal operation during heavy data transfer. Ineffective thermal pad contact.	This is expected as the aluminum casing dissipates heat. Ensure thermal pads are correctly positioned and making good contact with the SSD and enclosure.

Especificacións

Característica	Detalle
Modelo	I9-Seal
Marca	JEYI
Interface de hardware	USB 3.2 Xen. 2 (USB-C)
Taxa de transferencia de datos	Ata 10 Gbps
Compatible SSD Type	NVMe M.2 (PCI-E M-Key)
Supported SSD Form Factor	2280 (80mm) only
Capacidade máxima de almacenamento	4 TB
Chipset	JMS583 A3
Características	UASP Support, TRIM Support, Win to Go (WTG) Support
Material	Aliaxe de aluminio
Cor	Prata
Dimensións do produto	4.06 x 1.02 x 0.39 polgadas (103 x 26 x 10 mm)
Peso do elemento	0.317 onzas (9 gramos)
Sistemas operativos compatibles	Windows, macOS, Linux, iOS, Android

Diagram of the JMS583 A3 master chip — Image: A detailed illustration of the JMS583 A3 master chip, which is integrated into the enclosure for stable and high-speed data transmission up to 10Gbps.

Garantía e Soporte

For warranty information or technical support, please refer to the official JEYI website or contact their customer service directly. Details regarding specific warranty periods and support channels are typically provided with your purchase documentation or on the manufacturer's websitio.

Fabricante: JEYI

Websitio: Visit the JEYI Store on Amazon

	JEYI JMS583 NVMe SSD Enclosure: USB-C 10Gbps M.2 NVMe Enclosure User Manual Comprehensive user manual for the JEYI JMS583 NVMe Only SSD Enclosure, detailing specifications, system requirements, hardware installation, troubleshooting, and FAQ for the USB 3.2 Gen 2 10Gbps M.2 NVMe SSD enclosure.
	JEYI SK4PRO M.2 NVMe Adapter Installation Guide Easy installation guide for the JEYI SK4PRO M.2 NVMe adapter. Learn how to install your PCIe 4.0 NVMe SSDs (2230/2242/2260/2280) with this user-friendly adapter.
	JEYI icold-007 M.2 NVMe SSD Heatsink Installation Guide Step-by-step guide on how to install the JEYI icold-007 M.2 NVMe SSD heatsink for optimal cooling performance in PC and PS5 systems. Learn proper thermal pad application and heatsink mounting.
	JEYI SSD Enclosure Installation Guide A straightforward guide to installing your SSD into a JEYI enclosure. Follow these simple steps for a quick and easy setup of your storage device.
	JEYI SK4 M.2 NVMe to PCIe 4.0 Adapter Installation Guide Step-by-step installation guide for the JEYI SK4 M.2 NVMe to PCIe 4.0 adapter card. Learn how to easily connect your NVMe SSD to PCIe x4, x8, or x16 slots for enhanced desktop PC storage performance. Supports PCIe Gen4 full speed.
	JEYI M2-PC5.0Pro PCIe 5.0 to M.2 NVMe Adapter Card Installation Guide Learn how to install the JEYI M2-PC5.0Pro, a high-performance PCIe 5.0 to M.2 NVMe adapter card featuring an aluminum heatsink for Gen5 SSDs. This guide details the steps for seamless integration into your system.

JEYI I9-Seal