1. Introdución
This manual provides detailed instructions for the installation, operation, and maintenance of your Onforu 100W LED Security Light with Motion Sensor. Please read this manual thoroughly before installation and retain it for future reference.
The Onforu 100W LED Security Light is designed for outdoor use, providing bright illumination with energy efficiency and motion detection capabilities. It features a durable, waterproof design suitable for various weather conditions.
2. Información importante de seguridade
ADVERTENCIA: Risco de descarga eléctrica. Desconecte a alimentación no fusible ou no disyuntor antes da instalación ou do mantemento.
- Ensure the power supply is turned off before attempting any installation or maintenance.
- A instalación debe ser realizada por un electricista cualificado ou unha persoa familiarizada coa construción e o funcionamento do produto e os perigos que implica.
- Comprobar que a subministración voltage is correct (AC 100-240V).
- Non o instale en superficies inestables ou propensas a vibracións.
- Asegúrese de que todas as conexións estean seguras e debidamente illadas.
- Do not look directly into the LED light source when it is illuminated, as this may cause eye damage.
- This fixture is rated IP65 for outdoor use, protecting against dust and water jets. However, it should not be submerged in water.
3. Produto rematadoview
The Onforu 100W LED Security Light features three adjustable light heads and an integrated motion sensor. Its robust design ensures reliable performance in outdoor environments.
3.1 Características principais
- Alto Brillo: 100W LED with 9000 lumens output, equivalent to 500W traditional bulbs.
- Detección de movemento: 180° sensing angle, detection range of 16.4 to 32.8 feet.
- Deseño axustable: Three light heads can be adjusted to cover a 270° illumination zone.
- Construción duradeira: Die-cast aluminum housing for efficient heat dissipation and extended lifespan.
- Resistente á intemperie: IP65 waterproof rating for protection against rain, sleet, and snow.
- Aforro de enerxía: Reduces electricity consumption significantly compared to traditional lighting.
3.2 Compoñentes do produto
Refer to the image below for a visual representation of the product components.
Figura 1: Onforu 100W LED Security Light with Motion Sensor. This image displays the front view of the security light, showing its three adjustable LED panels and the motion sensor located beneath the central panel.
Figura 2: Explotou view illustrating the internal components of the LED security light, including the 100W LED lamp beads and high-precision light transmission design.
4. Instrucións de instalación
Before beginning installation, ensure all necessary tools are available and the power supply is disconnected.
4.1 Recommended Mounting Height and Sensing Area
For optimal performance, install the light at a height of 10 to 16.4 feet (3 to 5 meters) from the ground. The motion sensor has a 180° sensing angle and can detect motion up to 16.4 to 32.8 feet (5 to 10 meters) away.
Figura 3: Diagram showing the versatile motion detection capabilities, recommended mounting height (10-16 ft), and sensing distance (16.4-32.8 ft) for the security light.
Vídeo 1: This video demonstrates the motion detection capabilities of the Onforu 100W LED Security Light, showing how it illuminates an area when a car or person approaches, and then turns off after a set time. It also highlights the wide illumination angle and range.
4.2 Diagrama de cableado
The fixture requires a standard AC power connection. Follow the wiring color codes:
- Fío negro: Live Wire (L)
- Fío verde: Ground Wire (G)
- Fío branco: Cable neutro (N)
Figura 4: Detailed diagram showing the wiring connections (Live, Ground, Neutral) and overall dimensions of the security light.
4.3 Pasos de montaxe
- Prepare a superficie de montaxe: Asegúrese de que a superficie de montaxe sexa resistente e poida soportar o peso do dispositivo.
- Coloque a placa de montaxe: Secure the mounting plate to the wall or soffit using appropriate screws and anchors.
- Conectar cableado: Carefully connect the Live, Ground, and Neutral wires from your power supply to the corresponding wires on the fixture. Use wire nuts to secure connections.
- Montar o aparello: Attach the light fixture to the mounting plate and secure it with the provided screw.
- Axustar os cabezales das luces: Loosen the adjustment screws on the light heads and motion sensor to position them as desired. Tighten screws once adjusted. The light heads can be adjusted up to 270 degrees.
Figura 5: Explotou view illustrating the easy installation process, showing the mounting plate, wiring connections, and how the fixture attaches.
Figura 6: Image demonstrating the adjustable light heads, allowing for a 270-degree detection zone and flexible illumination angles.
5. Instrucións de funcionamento
The motion sensor has three adjustable settings to customize its operation:
Figura 7: Close-up of the motion sensor with three adjustment knobs labeled DISTANCE, LUX, and TIME.
- DISTANCE (Sensitivity): Adjusts the detection range of the motion sensor from 16.4 feet (Min) to 32.8 feet (Max). Turn the knob clockwise to increase sensitivity, counter-clockwise to decrease.
- TIME (Delay Time): Sets how long the light remains on after motion is detected and no further motion is sensed. Adjustable from 10 seconds (Min) to 7 minutes (Max). Turn clockwise for longer duration.
- LUX (Ambient Light Sensor): Determines the ambient light level at which the motion sensor will activate the light.
- Modo de día (icona do sol): Motion detection works during both day and night.
- Modo nocturno (icona da lúa): A detección de movemento só funciona pola noite ou en condicións de pouca luz.
6. Mantemento
Un mantemento regular garante un rendemento óptimo e unha maior duración da súa luz de seguridade.
- Limpeza: Limpe periodicamente a luminaria e a lente do sensor de movemento cun pano suave eamp pano. Non use produtos de limpeza ou disolventes abrasivos.
- Inspección: Regularly check for any loose wiring, damaged components, or signs of wear. Ensure the mounting is secure.
- LED: A fonte de luz LED está integrada e non a pode substituír o usuario.
Figura 8: Image illustrating the IP65 waterproof rating of the security light, showing its resilience in rain, snow, and sunny conditions.
7 Solución de problemas
If you encounter issues with your Onforu LED Security Light, refer to the following common problems and solutions:
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non acende. |
|
|
| A luz permanece acesa continuamente. |
|
|
| A luz parpadea ou escintilea. |
|
|
| O sensor de movemento non detecta. |
|
|
8. Especificacións do produto
| Característica | Detalle |
|---|---|
| Marca | Onforu |
| Nome do modelo | Motion Sensor Outdoor Light (BDD100G-3) |
| Wattage | 100 vatios |
| Brillo | 9000 lúmenes |
| Temperatura da cor | 6000 Kelvin (branco frío) |
| Tipo de fonte de luz | LED |
| Material | Aluminio fundido a presión, Metal |
| Nivel de resistencia á auga | Impermeable IP65 |
| Ángulo do sensor de movemento | 180° |
| Distancia do sensor de movemento | 16.4 feet ~ 32.8 feet |
| Axuste do tempo de atraso | 10 segundos ~ 7 minutos |
| Dimensións do produto | 10 cm de longo x 6 cm de ancho x 7 cm de alto |
| Peso do elemento | 3.05 libras |
| Tipo de instalación | Soporte de parede |
| Uso interior/exterior | Ao aire libre |
9. Garantía e soporte
A luz de seguridade LED Onforu de 100 W (modelo BDD100G-3) inclúe 2 ano de garantía desde a data de compra.
For technical support, warranty claims, or any questions regarding your product, please contact Onforu customer service. Refer to the official Onforu websitio para obter a información de contacto máis actualizada.
Soporte en liña: Visita o Tenda Onforu en Amazon para obter información sobre o produto e recursos de asistencia.
