SuperlightingLED 12V 4in1 RGBW LED Strip Lights User Manual

Produto rematadoview

The SuperlightingLED 12V 4in1 RGBW LED Strip Lights are designed for flexible and versatile lighting applications. Featuring 5050 SMD LEDs with red, green, blue, and 6000K daylight white colors integrated into a single LED, this strip offers high brightness and low power consumption. Its unique S-shape design allows for 360° bending, making it ideal for intricate designs such as DIY letters, light boxes, and irregular lighting installations. The strip is non-waterproof (IP20 rated) and intended for indoor use.

A roll of SuperlightingLED 12V 4in1 RGBW LED Strip Lights, featuring RGB and 6000K daylight white LEDs.

Características clave

• Bright LED Strip Lights: Adapts 4in1 5050 SMD LEDs with red, green, blue, and white light colors in one LED. Features 240 SMD5050 LEDs (48 lights per meter) for high brightness and low power consumption (60 watts for 5m/16.4ft).
• Can Make Any Shape, 360° Bending: Extremely flexible S-shape design allows for free bending to create various shapes without damaging the FPCB board. Suitable for advertising lighting, light boxes, and channel letter lighting.
• RGBW Color Changing, Multi-Color Lights: Universal RGBW color changing LED light strips capable of producing a wide variety of colors including red, green, blue, yellow, purple, ice blue, and white. The dimmable white light color temperature is 6000K pure white, purer than RGB white.
• High Color Rendering Index, Ra 85+: With a high CRI of 85+, this 12V RGBW LED strip accurately restores object colors, promoting eye comfort and safety.
• 3M Adhesive Tape Installation: Features 3M adhesive backing for easy installation on various surfaces such as under cabinets, in bedrooms, kitchens, or letter channels. Note: This S-shape bendable LED strip is IP20 non-waterproof and suitable for indoor lighting only.

Especificacións

Que está incluído

• 12V RGBW LED Strip Lights (16.4ft/5m roll)
• Remote Control (basic IR remote)

Note: A 12V power supply (minimum 75W recommended) and an advanced RGBW LED controller (e.g., WB5 or FUT043A+) are necessary for full functionality and are NOT included in the package. These must be purchased separately.

Configuración e instalación

Before installation, ensure the surface is clean and dry. The following video and steps will guide you through the installation process. Please note that a 12V ≥75W power supply and a compatible RGBW LED controller are necessary for operation but are not included in the package. These components must be purchased separately.

Pasos de instalación

1. Pelar e pegar: Carefully peel off the blue protective film from the adhesive backing of the LED strip. Ensure the installation surface is smooth, clean, and dry for optimal adhesion.


A hand peeling the blue protective film from the adhesive backing of the LED strip, preparing it for installation.

2. Flexible Bending: The S-shape design allows for twisting and folding to create various shapes, such as letters or intricate designs. Apply gentle pressure to adhere the strip to your desired surface. (Refer to video at 0:08 for demonstration).

A close-up of the S-shape LED strip being bent and folded, highlighting its flexibility for custom installations.


Comparison image showing the S-shape LED strip's ability to bend at sharp angles versus an ordinary strip that cannot.

3. Corte a medida: The LED strip can be cut every 62.5mm (approximately every 3 LEDs) at designated cut marks to achieve the desired length.


Diagram illustrating the cutting points on the LED strip, indicating that it can be cut every 62.5mm (every 3 LEDs) for precise length control.


A pair of scissors cutting the LED strip at a designated mark, demonstrating how to easily adjust its length.
4. Conexión de cableado: Connect the wires from the LED strip to your compatible RGBW LED controller. Ensure correct polarity and color wire matching according to the controller's ports. (Refer to video at 2:08 for demonstration).
5. Conexión de alimentación: Connect the controller to a 12V power supply (minimum 75W recommended). (Refer to video at 2:38 for demonstration).

Instrucións de funcionamento

Once properly installed and powered, the LED strip can be controlled via a compatible RGBW LED controller (e.g., WB5 or FUT043A+ models, available separately) or the included basic remote control. Advanced controllers typically offer app control for various lighting functions.

Funcións:

• Cambio de cor: Utilize your controller or remote to select from a wide spectrum of RGB colors, including red, green, blue, yellow, purple, and ice blue.

The LED strip illuminated in vibrant red, green, and blue colors, showcasing its RGB capabilities.
• Pure White Light & Dimmable: The strip also features a 6000K pure white light. Use your controller or app to adjust the brightness levels from 1% to 100%. (Refer to video at 3:01 for dimming demonstration).
• Aplicación Examples: The flexibility and color options make these strips ideal for various applications such as DIY letters, irregular lighting, advertising signs, and light boxes. (Refer to video at 0:43 for application examples).

Mantemento e coidados

• Limpeza: Ensure the LED strip is clean and dry before installation. For ongoing maintenance, gently wipe the strip with a dry, soft cloth. Avoid using harsh chemicals or abrasive materials.
• Resistencia á auga: This LED strip is rated IP20, meaning it is non impermeable. It is suitable for indoor use only. Avoid exposure to water or high humidity.
• Manexo: While flexible, avoid excessive force or sharp bending beyond its natural S-shape design to prevent damage to the FPCB board.

Resolución de problemas

• As luces non se acenden:
  • Check all connections: Ensure the LED strip is securely connected to the controller, and the controller is properly connected to the power supply.
  • Verify power supply: Confirm the 12V power supply is functioning and provides sufficient wattage (polo menos 75 W).
  • Check controller: Ensure the controller is powered on and set to an active mode.
• Cores incorrectas ou parpadeo:
  • Check wire connections: Ensure the color-coded wires (Red, Green, Blue, White, DC12V+) are correctly inserted into their corresponding ports on the controller.
  • Controller compatibility: Verify that your RGBW LED controller is compatible with 4-in-1 RGBW strips.
  • Power supply stability: An unstable power supply can cause flickering. Ensure it meets the voltage e wattage requisitos.
• Adhesivo que non se pega:
  • Clean surface: The installation surface must be smooth, clean, and dry for optimal adhesion.
  • Apply pressure: After peeling, apply firm, even pressure along the strip to ensure good contact with the surface.

Garantía e Soporte

For any questions or if you are not fully satisfied with your SuperlightingLED product, please contact SuperlightingLED customer support. We are here to help!

Contact information can typically be found on the product packaging or the seller's store page on Amazon.