1. Información de seguridade
- Desconecte sempre a alimentación antes da instalación ou mantemento.
- Asegúrese de que a fonte de alimentación voltage (AC100-277V) matches the product's requirements.
- Installation should be performed by a qualified electrician if hardwiring is required.
- Do not look directly into the LED light source when it is illuminated to avoid eye strain.
- Manter lonxe de materiais inflamables.
- Ensure proper grounding for safe operation.
2. Contido do paquete
Verify all components are present before installation:
- 4 x 240W LED UFO High Bay Light units
- 1 x manual de instrucións
- 4 x US Hooks
- 4 x Safety Ropes
Image: Four 240W UFO LED High Bay Lights with included accessories in their packaging.
3. Especificacións
| Wattage | 240 W |
| Fluxo luminoso | 36,000 LM |
| Eficacia luminosa | 150 LM/W |
| Temperatura da cor | 5000K de luz do día |
| Ángulo do feixe | 120° |
| Voltage | AC100-277V |
| Atenuación | 0-10V Dimmable (dimmer switch not included) |
| Vida útil | Ata 50,000 horas |
| Material | ADC12 Die-cast Aluminum Housing |
| Clasificación impermeable | IP65 |
| Nivel de protección | IK08 |
| Dimensións | 13.38 cm de longo x 6.65 cm de ancho x 13.38 cm de alto |
Image: Illustration of the 3 selectable wattage options (150W, 200W, 240W) and corresponding lumen outputs.
Image: Diagram highlighting the efficient heat dissipation features including die-casting aluminum heatsink and hollow out heatsink design.
4. Instrucións de instalación
The JC-LGL UFO LED High Bay Light is designed for easy installation. Follow these steps for safe and effective setup.
4.1 Hanging Installation (Plug and Play)
- Identify a suitable mounting point on the ceiling or beam that can safely support the weight of the light fixture.
- Screw the provided US Hook into the designated hole on top of the light fixture. Ensure it is securely tightened.
- Attach the safety rope to the fixture and a secure point on the ceiling/beam as an additional safety measure.
- Hang the light fixture from the pre-installed mounting point using the hook.
- Plug the 6-foot power cord into a standard American 3-prong switched outlet.
Image: Components for plug and play installation including the 6-foot power cord, US hook, and safety cable.
4.2 Instalación con cableado fixo
For hardwired installations, it is recommended to consult a qualified electrician.
- Disconnect power at the circuit breaker before beginning any wiring.
- Cut off the 3-prong plug from the power cord.
- Connect the light's wires to your building's electrical system (AC100-277V) according to local electrical codes. Ensure proper grounding.
- Secure the fixture using the hanging method described above.
4.3 0-10V Dimming Connection
The light supports 0-10V dimming. A compatible 0-10V dimmer switch (not included) is required.
- Locate the purple and grey dimming wires extending from the fixture.
- Connect the purple wire to the positive (+) dimming control wire of your dimmer switch.
- Connect the grey wire to the negative (-) dimming control wire of your dimmer switch.
- Asegúrese de que todas as conexións estean seguras e illadas.
4.4 Vídeos de instalación
Video: JC-LGL Dimmable UFO LED High Bay Light. This video provides an overview das características do produto e do proceso de instalación.
Video: JC-LGL easy to install and super bright high bay lighting. This video demonstrates the ease of installation and the brightness of the light.
5. Instrucións de funcionamento
- Encendido/apagado: If connected to a switched outlet, use the wall switch to turn the light on or off.
- Adormecer: If a compatible 0-10V dimmer switch is installed, use the dimmer control to adjust the light output from 0% to 100%.
- Wat seleccionabletage: The light features 3 selectable wattage options. Refer to the product label or specific instructions for how to adjust this setting if available on your model.
6. Mantemento
- Limpeza: Ensure the light is off and cool before cleaning. Use a soft, damp cloth to wipe the surface. Do not use abrasive cleaners or solvents.
- Inspección: Periodically check the hanging hardware and electrical connections for any signs of wear or damage. Tighten any loose connections.
- No user-serviceable parts inside. Do not attempt to open or repair the fixture.
7 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non se acende | No power supply; Loose connection; Faulty switch | Check power source and circuit breaker; Verify all electrical connections are secure; Test the switch. |
| Luz parpadea | Unstable power; Loose wiring; Incompatible dimmer | Ensure stable power supply; Check all wiring connections; Use a compatible 0-10V dimmer. |
| A regulación de intensidade non funciona | Incorrect dimmer wiring; Incompatible dimmer; No dimmer installed | Verify dimming wire connections (purple/grey); Ensure dimmer is 0-10V compatible; Install a compatible dimmer. |
8. Aplicacións
The JC-LGL UFO LED High Bay Light is suitable for a wide range of indoor commercial and industrial applications:
- Almacéns
- Fábricas
- Obradoiros
- Hórreos
- Ximnasios
- Tendas
- Garaxes
Imaxe: Examples of wide applications including warehouses, factories, gymnasiums, barns, garages, and workshops.
9. Garantía e soporte
This JC-LGL UFO LED High Bay Light comes with a 5 ano de garantía. Each bay lighting fixture has been tested to function 100% effectively.
For any issues relating to the product, please do not hesitate to contact our professional support team. High quality standards and friendly customer service are our priority.
Contact information can typically be found on the product packaging or the official JC-LGL websitio.
