Phanteks Eclipse G500A DRGB Mid Tower Case User Manual

1. Produto rematadoview

The Phanteks Eclipse G500A DRGB is a high-performance mid-tower chassis designed to accommodate modern PC components with excellent airflow and integrated D-RGB lighting. It features an Ultra-fine Performance Mesh on both the front and top panels, ensuring optimal cooling and dust filtration.

Figure 1: Phanteks Eclipse G500A DRGB Mid Tower Case, Matte White.

Características principais:

• Deseño de alto fluxo de aire: Ultra-fine Performance Mesh on front and top panels for superior cooling and dust filtration.
• Iluminación D-RGB integrada: Built-in D-RGB lighting on the front and side, controllable via manual buttons or motherboard synchronization.
• Ventiladores preinstalados: Includes three high-performance M25-140 D-RGB fans.
• Amplo soporte de refrixeración: Supports up to 420mm radiators in the front and 360mm in the top.
• Interior amplo: Accommodates full-length GPUs and offers vertical GPU mounting options (with optional bracket).
• Almacenamento flexible: Multiple HDD and SSD locations, including dedicated SSD brackets and stackable HDD bays.
• E/S frontal moderna: Features 10Gbps USB-C, 2x USB 3.0, Microphone/Headphone Combo, Power button, and D-RGB controls.

2. Configuración e instalación

This section provides general guidelines for installing components into your Phanteks Eclipse G500A DRGB chassis. Always refer to your component manuals for specific installation instructions.

2.1 Preparing the Chassis

Before installing components, ensure the chassis is placed on a stable, flat surface. Remove the side panels by gently pulling them open (they are hinged) to access the interior.

Figure 2: The removable front panel allows for easy installation of fans and radiators.

Figure 3: The removable top mesh panel facilitates fan and radiator installation.

2.2 Instalación da placa base

The G500A supports ATX, micro-ATX, mini-ITX, and E-ATX motherboards (up to 280mm wide). Install the necessary standoffs for your motherboard form factor, then secure the motherboard with screws.

2.3 Instalación da Unidade de Alimentación (PSU).

Install the PSU at the bottom rear of the chassis. The G500A supports PSUs up to 250mm in length (195mm if all 4 bottom HDD positions are used).

2.4 Instalación do dispositivo de almacenamento

The case offers extensive storage options:

• SSD de 2.5 polgadas: Up to 9 dedicated 2.5" drive bays are included.
• Discos duros de 3.5 polgadas: Two stackable 3.5" HDD bays are included, expandable up to a total of 10 HDD bays.

Figure 4: Multiple storage options for 2.5" and 3.5" drives.

2.5 Instalación da tarxeta gráfica (GPU)

The G500A supports graphics cards up to 435mm in length. For vertical GPU mounting, an optional bracket (PH-VGPUKT4.0_03) or riser cable is required.

2.6 Instalación do sistema de refrixeración

The chassis supports various fan and radiator configurations:

• Soporte para fans:
  • Front: 3x 120mm or 3x 140mm (3x 140mm pre-installed)
  • Top: 3x 120mm or 3x 140mm
  • Traseiro: 1x 120 mm ou 1x 140 mm
• Liquid Cooling Radiator Support:
  • Front: Up to 360mm (120mm radiator) or 420mm (140mm radiator)
  • Top: Up to 360mm (120mm radiator) or 280mm (140mm radiator)
  • Traseira: 120 mm

Figure 5: High-end cooling compatibility with various fan and radiator sizes.

2.7 Xestión de cables

The G500A provides ample space and Velcro ties for efficient cable management, ensuring a clean interior and optimal airflow. Cover doors help to conceal cables on the backside of the motherboard tray.

2.8 Vídeos de instalación

3. Instrucións de funcionamento

3.1 Panel frontal de E/S

O panel de E/S frontal proporciona un acceso cómodo aos portos e controis esenciais:

• Botón de encendido: Para acender/apagar o sistema.
• Portos USB 3.0 (x2): Para conectar dispositivos USB 3.0.
• USB-C Gen2 Port (x1): For high-speed USB-C connectivity.
• Conector combinado de micrófono/auriculares: Para entrada e saída de son.
• D-RGB Mode Button: Cycles through pre-programmed D-RGB lighting effects.
• D-RGB Color Button: Changes the color of the D-RGB lighting.

Figure 6: Front I/O panel with USB-C, USB 3.0, audio, and D-RGB controls.

Control de iluminación 3.2 D-RGB

The integrated D-RGB lighting can be controlled in two ways:

• Control manual: Use the D-RGB Mode and Color buttons on the front I/O panel to cycle through effects and colors without software.
• Sincronización da placa base: Connect the D-RGB controller to a compatible motherboard's D-RGB header to enable software control and synchronization with other D-RGB components.

Figure 7: Integrated D-RGB lighting with included M25-140 D-RGB fans.

4. Mantemento

Un mantemento regular axuda a garantir un rendemento óptimo e unha maior duración dos compoñentes do teu PC.

• Dust Filtration: The Ultra-fine Performance Mesh on the front and top panels acts as a dust filter. Periodically remove these panels and clean the mesh to maintain optimal airflow.
• Limpeza de interiores: Use compressed air to remove dust from inside the chassis, especially from fans, heatsinks, and other components. Ensure the system is powered off and unplugged before cleaning.
• Limpeza exterior: Limpe as superficies exteriores cun suave, damp pano. Evite produtos de limpeza abrasivos ou solventes.

5 Solución de problemas

Esta sección aborda problemas comúns que podes atopar coa carcasa do teu PC.

5.1 Problemas de enerxía

• O sistema non se acende:
  • Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected to the motherboard and components.
  • Verifique que o interruptor da PSU estea na posición "ON".
  • Check that the front panel power switch cable is correctly connected to the motherboard's F_PANEL header.

5.2 D-RGB Lighting Issues

• D-RGB not lighting up or incorrect colors:
  • Ensure the D-RGB cables from the fans and LED strips are correctly connected to the integrated D-RGB controller.
  • If using motherboard synchronization, ensure the D-RGB controller is connected to the motherboard's D-RGB header and that the motherboard's lighting software is configured correctly.
  • Verify the D-RGB controller is receiving power (e.g., via SATA power connector).
  • Try cycling through modes and colors using the front I/O buttons to rule out software issues.

5.3 Fan Noise or Malfunction

• Ruído excesivo do ventilador:
  • Comprobe se hai acumulación de po nas aspas do ventilador e límpeas se é necesario.
  • Ensure fans are securely mounted and not vibrating against the chassis.
  • Verify fan speeds are controlled appropriately by the motherboard or fan controller.
• O ventilador non xira:
  • Check fan power connections to the motherboard or fan hub.
  • Ensure fan headers are enabled in the BIOS/UEFI settings.

6. Especificacións

Detailed technical specifications for the Phanteks Eclipse G500A DRGB Mid Tower Case.

7. Garantía e soporte

Phanteks products are manufactured with high-quality standards. For warranty information and technical support, please refer to the official Phanteks websitio ou póñase en contacto co seu servizo de atención ao cliente.

Información de contacto:

• Websitio: www.phanteks.com
• Phanteks Taiwan Inc.: 11F., no 150, Jian 1st Rd., Zhonghe Dist. Nova cidade de Taipei 235
• Importer EU (Axpertec Int B.V.): Sydneystraat 33, 3047 BP Rotterdam, The Netherlands
• Importer US (Axpertec Inc.): 20465 E Walnut Dr. N, City of Industry, California 91789, United States

Figure 8: Phanteks company and importer details, along with compliance markings (CE, UKCA, RoHS).