Introdución
The SimPure Y7P-BW Countertop Reverse Osmosis System is designed to provide clean, great-tasting drinking water by effectively reducing impurities. This manual provides essential information for the setup, operation, and maintenance of your water purification system.
Características clave
- SGS Tested Purification: Converts tap water/well water into great tasting drinking water by reducing impurities, sediment, PFOA/PFOS, Lead, Arsenic, Mercury, chlorine, TDS, Fluoride, Nitrate, and more.
- Non se require instalación: Plug-in and use immediately. Comes with a full set of quick-changing twist-and-seal filters.
- Effortless Hydration & Elevated Lifestyle: Provides 528 gallons of purified water per filter set, equivalent to approximately 4000 bottled water bottles, promoting sustainability and reducing plastic waste.
- High Efficiency in Water Purifying: Achieves a 4:1 pure to drain ratio, saving up to 1500% more water compared to under-sink RO systems. Features a fast dispense flow rate of 418 GPD (approx. 15 seconds per cup).
- Esterilización UV: The system incorporates UV sterilization for enhanced water purification.
O que hai na caixa
- SimPure Y7P-BW Countertop Reverse Osmosis System Unit
- One set of quick-change twist-and-seal filters (Composite Filter and RO Filter)
- Manual de usuario (este documento)
Configuración
- Desembalaxe: Carefully remove all components from the packaging. Ensure all parts listed in "What's in the Box" are present.
- Colocación: Place the unit on a stable, flat surface near a power outlet. Ensure adequate space around the unit for ventilation and access to the water tank.
- Instalación do filtro: The system comes with pre-installed filters. If new filters are needed, refer to the "Maintenance" section for proper installation.
- Encher o depósito de auga: Remove the raw water tank from the back of the unit. Fill it with tap water up to the MAX line. Reinsert the tank securely into the unit.
Image: SimPure Y7P-BW system with its two filters, illustrating the compact design and filter types.
- Conexión de alimentación: Plug the power cord into a grounded electrical outlet. The unit will power on and initiate a self-check.
- Lavado inicial: Before first use, perform an initial flush to clean the system. Place a large container under the dispenser. Press the "Flushing" button (or equivalent on your model's interface) and allow the system to dispense water until the tank is empty. Repeat this process 2-3 times to ensure thorough flushing and optimal water quality.
Instrucións de funcionamento
- Enchendo o depósito: Ensure the raw water tank is filled with tap water. The system will indicate when the water level is low.
- Distribución de auga: Place a cup or container under the dispenser nozzle. Select the desired water volume (e.g., 6 oz, 12 oz, 15 oz) by pressing the corresponding button on the control panel. The system will automatically dispense the selected amount of purified water.
Image: Close-up of the SimPure Y7P-BW control panel with illuminated buttons for various dispense volumes and the UV indicator, showing water being dispensed into a glass.
- Esterilización UV: The system incorporates UV sterilization. The UV indicator light will illuminate during operation, confirming the UV treatment is active.
- Luces indicadoras: Pay attention to the indicator lights on the control panel. These lights provide information on water levels, filter status, and system operation. Refer to the troubleshooting section for specific light meanings.
Mantemento
Substitución do filtro
The SimPure Y7P-BW uses two main filters: a Composite Filter (CF) and a Reverse Osmosis (RO) Filter. Both filters have an estimated service life of 6 months or 528 gallons, whichever comes first. The system will indicate when filters need replacement.
Image: Diagram showing the service life of the Composite Filter (CF) and RO Filter, both rated for 6 months or 528 gallons.
- Apagado: Desenchufe a unidade da toma de corrente.
- Eliminar filtros: Open the filter compartment cover. Twist the old filters counter-clockwise to unlock and pull them out.
- Instalar novos filtros: Insert the new filters into their respective slots (CF and RO). Twist clockwise to lock them into place. Ensure they are securely seated.
- Restablecer vida do filtro: After replacing filters, plug the unit back in. Press and hold the filter reset button (refer to your control panel diagram) for a few seconds until the filter indicator light resets.
- Sistema de descarga: Perform a flush cycle (as described in "Setup") after replacing filters to ensure proper function and remove any air bubbles or carbon fines.
Limpeza do depósito de auga
Regular cleaning of the raw water tank is recommended to prevent mineral buildup and maintain water quality. Clean the tank at least once a month or as needed.
- Remove the raw water tank from the unit.
- Baleirar a auga restante.
- Wash the tank with mild soap and warm water. Rinse thoroughly to remove all soap residue.
- Seque o tanque completamente antes de volvelo inserir na unidade.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| "Change Water" Indicator On | Raw water tank is empty or water quality is low. | Refill the raw water tank with fresh tap water. If the light persists after refilling, ensure the tank is properly seated. |
| Slow Water Dispense | Clogged filters or air in the system. | Check filter status and replace if necessary. Perform a flush cycle to remove air. |
| Water Tastes Unusual | New filters not flushed, or filters need replacement. | Perform additional flush cycles. Replace filters if they are past their service life. |
| A unidade non se acende | Power cord not connected, or power outlet issue. | Asegúrate de que o cable de alimentación estea conectado correctamente a unha toma de corrente que funcione. Proba cunha toma de corrente diferente. |
Especificacións
- Número de modelo do artigo: Y7P BW
- Marca: SimPure
- Tipo de instalación: Encimera
- Método de purificación: Reverse Osmosis, Ultraviolet
- Fonte de enerxía: Conectar
- Caudal máximo: 418 Liters Per Day
- Característica especial: Multi Stage Filtration, NSF certified
Image: Comparison illustrating the plumbing-free nature of the SimPure Y7P-BW system versus traditional under-sink systems and bottled water.
Image: Diagram comparing the pure to drain ratio of SimPure Y7P-BW (4:1) to other countertop RO systems (2:1) and traditional under-sink systems (1:3).
Image: Internal diagram of the SimPure Y7P-BW showing the 5-stage purification process, including PP+CTO, RO, and UV filtration, with a 1.3-gallon feed water tank and 0.45-gallon internal pure water reservoir.
Garantía e Soporte
SimPure is dedicated to providing world-class quality water filtration solutions. For any questions, concerns, or support regarding your SimPure Y7P-BW system, please contact our trained water specialists. SimPure has been serving the USA since 2006.
For replacement filters or further assistance, please visit the official SimPure websitio ou póñase en contacto directamente co servizo de atención ao cliente.
