KICKER 50GOLD154 15-Inch Gold Series Subwoofer Instruction Manual

1. Introdución

The KICKER Gold-Series 50GOLD154 is a 15-inch (38cm) dual voice coil (DVC) 4-ohm subwoofer, designed to deliver powerful and precise bass in various vehicle audio systems. This special 50th Anniversary Edition subwoofer combines classic aesthetics with modern KICKER engineering, featuring an 800 Watts RMS power handling and 1600 Watts peak power. It incorporates a Uniplate motor assembly with Forced-Air Cooling and a SoloKon Cone System for enhanced performance and durability.

Imaxe: Fronte view of the KICKER 50GOLD154 15-inch Gold Series Subwoofer, showcasing the black cone with the gold KICKER logo.

2. Información de seguridade

Please read and understand all safety instructions before installing and operating your KICKER 50GOLD154 subwoofer. Failure to follow these guidelines may result in injury or damage to the product or vehicle.

• Always disconnect the vehicle's battery negative terminal before beginning any electrical installation to prevent electrical shock or short circuits.
• Ensure proper wiring and impedance matching to prevent damage to the subwoofer, amplificador ou o sistema eléctrico do vehículo.
• Avoid exposing the subwoofer to moisture, excessive heat, or direct sunlight for prolonged periods.
• Use o equipo de protección individual axeitado, como lentes e luvas de seguridade, durante a instalación.
• Mount the subwoofer securely to prevent it from becoming a projectile in the event of sudden stops or collisions.
• Operating audio systems at extremely high volumes can cause permanent hearing damage. Use caution and maintain a safe listening level.

3. Que hai na caixa

Upon unpacking your KICKER 50GOLD154 Gold Series Subwoofer, please verify that all components are present:

• Single (1) 15-inch DVC Subwoofer
• Modelo de montaxe
• KICKER Sticker
• Manual de instrucións (este documento)

4. Configuración e instalación

Proper installation is crucial for optimal performance and longevity of your subwoofer. If you are unsure about any part of the installation process, consult with a professional car audio installer.

4.1 Consideracións de montaxe

The KICKER 50GOLD154 subwoofer requires a suitable enclosure for optimal sound reproduction. Ensure the enclosure is robust and properly sealed. Use the provided mounting template for precise cutout dimensions.

• Profundidade de montaxe: 7-15/16 polgadas (20.1 cm)
• Corte de montaxe: 13-3/4 polgadas (35 cm)

Image: Diagram showing the dimensions of the KICKER 50GOLD154 subwoofer, including its 15-inch diameter and 7.94-inch depth.

4.2 Wiring the Dual Voice Coil (DVC)

The 50GOLD154 features a Dual 4-ohm Voice Coil, offering flexibility in wiring configurations. It can be wired to present either a 2-ohm or an 8-ohm load to your ampvidador. Asegúrate sempre do teu ampO elevador é estable na impedancia escollida.

The oversized spring-loaded speaker terminals allow for fast and secure connection with up to 12 AWG sized wire.

Imaxe: Lateral view of the KICKER 50GOLD154 subwoofer, highlighting the robust frame and the gold-plated spring-loaded speaker terminals.

4.2.1 Parallel Wiring (2-ohm load)

To achieve a 2-ohm load, connect the positive terminal of Voice Coil 1 to the positive terminal of Voice Coil 2. Then, connect the negative terminal of Voice Coil 1 to the negative terminal of Voice Coil 2. Finally, connect the combined positive to the ampa saída positiva do lificador e a negativa combinada para o ampsaída negativa do lificador.

4.2.2 Series Wiring (8-ohm load)

To achieve an 8-ohm load, connect the positive terminal of Voice Coil 1 to the amplifier's positive output. Connect the negative terminal of Voice Coil 1 to the positive terminal of Voice Coil 2. Finally, connect the negative terminal of Voice Coil 2 to the ampsaída negativa do lificador.

4.3 AmpCoincidencia de vidadores

It is essential to match your amplifier's power output to the subwoofer's capabilities. The 50GOLD154 has a recommended RMS power range of 400-800 watts and a peak power handling of 1600 watts. Using an amplifier that provides power within this RMS range will ensure optimal performance and prevent damage.

5. Funcionamento do subwoofer

Once the subwoofer is correctly installed and wired, follow these steps for initial operation and optimal sound adjustment:

• Encendido inicial: After verifying all connections, turn on your vehicle's audio system. Start with the amplifier gain set to its minimum and the head unit volume low.
• Axuste de ganancia: Aumenta gradualmente o amplifier's gain control until you hear a balanced sound without distortion. Avoid setting the gain too high, as this can lead to clipping and damage the subwoofer.
• Configuración de cruce: Usa o teu amplifier's or head unit's low-pass filter (LPF) to send only low frequencies to the subwoofer. A common starting point for the LPF is between 80Hz and 100Hz.
• Control de fase: Se o teu amplifier or head unit has a phase control (0°/180°), experiment with both settings to find the one that provides the most impactful and cohesive bass response with your main speakers.
• Escoita a distorsión: If you hear any distortion, immediately reduce the volume or amplifier gain. Prolonged operation with distortion can cause irreversible damage to the subwoofer.

6. Mantemento

Regular maintenance will help ensure the longevity and consistent performance of your KICKER 50GOLD154 subwoofer.

• Limpeza: Keep the subwoofer cone and surround free from dust, dirt, and debris. Use a soft, dry cloth to gently wipe the surfaces. Avoid using harsh chemicals or abrasive cleaners.
• Comprobacións de conexión: Periodically inspect all wiring connections to ensure they remain tight and free from corrosion. Loose connections can lead to intermittent performance or damage.
• Protección ambiental: While designed for vehicle use, avoid exposing the subwoofer to extreme temperatures (very hot or very cold) or high humidity for extended periods.
• Integridade da carcasa: Regularly check the subwoofer enclosure for any signs of damage, cracks, or air leaks, which can negatively impact sound quality.

7 Solución de problemas

If you encounter issues with your KICKER 50GOLD154 subwoofer, refer to the following troubleshooting guide before contacting support.

8. Especificacións

Detailed technical specifications for the KICKER 50GOLD154 15-Inch Gold Series Subwoofer:

• Modelo: 50 OURO154
• Tipo de altofalante: Subwoofer
• Diámetro do subwoofer: 15 polgadas (38 cm)
• Manexo de potencia RMS: 400-800 vatios
• Manexo de potencia máxima: 1600 vatios
• Impedancia: Dual 4-ohm Voice Coil (wireable to 2-ohm or 8-ohm)
• Sensibilidade: 89.4 dB 1W/1M
• Resposta en frecuencia: 25 Hz a 500 Hz
• Profundidade de montaxe: 7-15/16 polgadas (20.1 cm)
• Corte de montaxe: 13-3/4 polgadas (35 cm)
• Dimensións do produto (P x A x A): 7.94" x 15" x 15"
• Peso do artigo: 17.91 libras
• Tecnoloxía de conectividade: Con cable
• Características principais: SoloKon Cone System, Forced-Air Cooling, Uniplate Motor Assembly

Image: Diagram illustrating KICKER's Forced-Air Cooling technology, showing how cone motion helps dissipate heat from the voice coil.

9. Información da garantía

The KICKER 50GOLD154 Gold Series Subwoofer comes with a limited warranty. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims.

For detailed warranty information, including coverage, exclusions, and how to make a claim, please visit the official KICKER website or contact KICKER customer support directly. Unauthorized modifications or improper installation may void the warranty.

10. Apoio

For technical assistance, further troubleshooting, or any questions regarding your KICKER 50GOLD154 subwoofer, please utilize the following resources:

• Official KICKER Websitio: Visita www.kicker.com for product information, FAQs, and support contact details.
• Atención ao cliente: Consulta o KICKER website for phone numbers or email contacts for customer support in your region.
• Distribuidores autorizados: Your local authorized KICKER dealer can also provide installation assistance and technical support.