Manual do usuario do inodoro intelixente sen tanque EPLO DP7 con bidé

1. Información importante de seguridade

Lea atentamente todas as instrucións antes da instalación e o uso. Garde este manual para futuras consultas.

• Ensure the electrical outlet is a Ground Fault Circuit Interrupter (GFCI) 110V outlet and is within 3 feet of the toilet.
• Verify water pressure is at least 35 PSI for optimal flushing performance.
• Do not expose the product to excessive moisture or water spray beyond normal bathroom use.
• Desconecte a alimentación antes de realizar calquera mantemento ou limpeza.

2. Contido do paquete

Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:

• EPLO DP7 Smart Toilet Unit
• Control remoto
• Mounting Accessory Kit (1 pc)
• Mounting Template cardboard
• Válvula en T (1 unidade)
• Manual de usuario (este documento)
• Anel de cera (1 unidade)
• Sealing Flange (1 pc)

3. Produto rematadoview

The EPLO DP7 is a tankless smart toilet designed for enhanced hygiene and comfort. Key features include automatic lid opening/closing, a heated seat, bidet functions, and various flushing options.

4. Guía de instalación

This section provides instructions for installing your EPLO DP7 Smart Toilet. Professional installation is recommended.

4.1 Comprobacións previas á instalación

• Rough-in Measurement: Ensure your bathroom has a standard 12-inch (305mm) rough-in.
• Subministro de auga: The toilet requires a 1/2-inch accessory connection type. Confirm your water supply line is compatible.
• Toma eléctrica: A dedicated 120V GFCI outlet is required within 3 feet of the toilet's installation location.
• Presión da auga: Minimum water pressure of 35 PSI is necessary for proper flushing and bidet operation.

4.2 Pasos da instalación

1. Preparar a zona: Turn off the water supply to the existing toilet and remove it. Clean the flange area thoroughly.
2. Position the Sealing Flange and Wax Ring: Place the provided sealing flange and wax ring over the drain opening.
3. Set the Toilet: Carefully lower the EPLO DP7 toilet onto the flange, aligning it with the bolts. Due to its weight (approximately 107.8 lbs), this may require two people.
4. Asegurar o inodoro: Use the mounting accessory kit to firmly secure the toilet to the floor.
5. Conectar o abastecemento de auga: Connect the 1/2-inch water supply line to the T-valve and then to the toilet's water inlet. Ensure all connections are tight to prevent leaks.
6. Conectar enerxía: Plug the toilet's power cord into the dedicated 120V GFCI outlet.
7. Funcións de proba: Turn on the water supply and power. Allow the toilet to fill and perform initial self-tests. Test all flushing and bidet functions.

5. Instrucións de funcionamento

The EPLO DP7 Smart Toilet offers multiple convenient operating features.

5.1 Automatic Lid Open/Close

The lid automatically opens when a user approaches and closes after use. This feature can also be controlled via the remote control or by a foot kick sensor.

5.2 Funcións do bidé

The hygienic stainless steel nozzle provides various wash options:

• Lavado traseiro: Para a limpeza posterior.
• Lavado feminino: A softer, wider spray for feminine hygiene.
• Moving Wash: The nozzle oscillates for a broader cleaning area.
• Warm Water Wash: Water temperature is adjustable for comfort.

The nozzle performs an auto-clean before and after each use and is movable for easy manual cleaning.

5.3 Heated Seat & Warm Dryer

• Asento Calefacción: The seat temperature is adjustable for comfort.
• Warm Dryer: After washing, a warm air dryer provides comfort. Air speed and temperature are adjustable.

5.4 Flushing Options

The DP7 offers multiple flushing methods:

• Remote Control Flush: Use the provided remote to initiate a flush.
• Press Knob Flush: A knob on the side of the toilet allows for manual flushing.
• Foot Kick Flush: A sensor at the base allows for hands-free flushing by gently kicking the sensor.
• Descarga automática fóra do asento: The toilet automatically flushes when the user stands up and moves away.

The toilet utilizes Siphonic Jet Flushing technology for efficient cleaning with 1.28 gallons per flush (GPF).

5.5 Luz nocturna

An integrated night light guides you in the dark, enhancing safety and convenience during nighttime use.

5.6 Blackout Flushing

No caso dunha alimentación outage, the built-in backup battery allows for flushing by pressing the knob on the side of the toilet.

6. Mantemento

Regular maintenance ensures the longevity and optimal performance of your EPLO DP7 Smart Toilet.

6.1 Limpeza do exterior

Limpe as superficies exteriores cun suave, damp cloth and mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads that could damage the finish.

6.2 Limpeza da boquilla

The nozzle performs an automatic self-cleaning cycle. For deeper cleaning, the nozzle is movable and can be gently wiped with a soft cloth and mild cleaner. Do not use excessive force or sharp objects.

6.3 Mantemento do filtro

Periodically check the water inlet filter for any debris or mineral buildup. If clogged, carefully remove and clean it under running water. Reinstall securely.

6.4 Almacenamento a longo prazo

If the toilet will not be used for an extended period, turn off the water supply and unplug the unit. Drain any remaining water from the toilet bowl and bidet system to prevent freezing or stagnación.

7 Solución de problemas

Consulta esta sección para ver os problemas comúns e as súas solucións.

• Toilet Not Flushing or Weak Flush:
  - Check water supply: Ensure the water supply valve is fully open.
  - Check water pressure: Insufficient water pressure (below 35 PSI) can cause weak flushing. Consult a plumber if your home's water pressure is consistently low.
  - Power supply: Ensure the toilet is properly plugged into a working GFCI outlet.
• Bidet Not Functioning:
  - Check water supply: Ensure water is flowing to the toilet.
  - Check power: Verify the toilet is powered on.
  - Nozzle obstruction: Inspect the nozzle for any blockages.
• A tapa non abre/pecha automaticamente:
  - Sensor obstruction: Ensure the sensor area is clean and unobstructed.
  - Power cycle: Unplug the toilet for 30 seconds and then plug it back in to reset the system.
• Heated Seat/Dryer Not Working:
  - Check power: Ensure the toilet is receiving power.
  - Settings: Verify that the heated seat and dryer functions are enabled and set to the desired temperature/speed via the remote control.
• LED Display Not Showing Temperature:
  - The LED display indicates real-time water/seat temperature. If it's not visible, ensure the toilet is powered on.

If the issue persists after attempting these solutions, please contact EPLO Customer Support.

8. Especificacións

9. Información da garantía

EPLO products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact EPLO Customer Support directly. Keep your proof of purchase for warranty claims.

10. Atención ao cliente

For technical assistance, troubleshooting, or parts inquiries, please contact EPLO Customer Support. You can typically find contact information on the EPLO brand websitio web ou a través da túa plataforma de compra.

When contacting support, please have your product model (DP7) and purchase details ready.