1. Introdución e finalview
The KEF R3 Meta Bookshelf Speakers are engineered to deliver high-fidelity audio performance. This model incorporates advanced acoustic technologies to provide a clear and natural sound experience. The R3 Meta is a true three-way design, sharing core driver technology with the R11 Meta, the flagship model in the R Series.
As características principais inclúen:
- 12th Generation Uni-Q Driver Array: This coaxial driver design integrates the tweeter and midrange unit, ensuring a single point source for sound, which enhances stereo imaging and soundstage precisión.
- Metamaterial Absorption Technology (MAT™): This innovative technology is designed to absorb 99% of unwanted sound from the rear of the tweeter, eliminating distortion and resulting in a purer, more natural high-frequency response.
- 6.5-inch Hybrid Aluminium Bass Driver: A powerful bass driver provides deep, controlled, and articulate low-frequency reproduction.
- Colocación versátil: Designed for shelf mounting, these speakers are suitable for various room sizes and setups.

Fronte view of the KEF R3 Meta Bookshelf Speaker with its protective grille.

Fronte view of the KEF R3 Meta Bookshelf Speaker, showcasing the Uni-Q driver array and bass driver.

Lado view of the KEF R3 Meta Bookshelf Speaker.
2. Configuración
Proper setup is crucial for optimal performance of your KEF R3 Meta speakers. Consider the following guidelines:
2.1 Colocación
- Tipo de montaxe: These are bookshelf speakers, designed for shelf mounting or placement on dedicated speaker stands. KEF S2 Speaker stands are sold separately and are recommended for optimal acoustic performance and stability.
- Acústica da sala: Place speakers symmetrically in your listening room. Experiment with distance from walls and corners to achieve the best bass response and soundstage.
- Posición de escoita: Position the speakers so that the Uni-Q driver array is roughly at ear level when seated in your primary listening position.
- Dimensións: Each speaker measures approximately 13.2 inches (D) x 16 inches (W) x 16.6 inches (H). Ensure adequate space for placement and ventilation.
2.2 Conexións
Connect your KEF R3 Meta speakers to a suitable amplifier using high-quality speaker cables. Ensure correct polarity (positive to positive, negative to negative) for both speakers and the ampmáis vivo.
- Impedancia: The speakers have an impedance of 4 Ohms. Ensure your amplifier is stable with a 4-Ohm load.
- Manexo de potencia: The speakers can handle a maximum output power of 400 Watts. Match your amplifier's power output appropriately to avoid damage.
- Fonte de enerxía: These are passive speakers and require an external ampvivificador polo poder.
3. En funcionamento
The KEF R3 Meta speakers are designed for a wide range of home entertainment applications, providing stereo audio output.
3.1 Reprodución de audio
- Modo de saída de audio: Stereo. For surround sound systems, additional speakers (e.g., center channel, surrounds, subwoofers) will be required.
- Usos recomendados: Ideal for music players, gaming consoles, DVD players, and enhancing television audio. They are suitable for home entertainment setups.
3.2 Conectividade
The KEF R3 Meta speakers support Bluetooth wireless communication for convenient streaming from compatible devices.
- Tecnoloxía sen fíos: Bluetooth.
- Alcance Bluetooth: Up to 10 meters (approximately 33 feet).
- Método de control: App control is available for managing settings and playback from your smart device.
4. Mantemento
To ensure the longevity and optimal performance of your KEF R3 Meta speakers, follow these maintenance guidelines:
- Limpeza: Gently wipe the speaker cabinets with a soft, dry, lint-free cloth. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.
- Grellas: The micro-perforated grilles are covered with Alcantara. Clean them carefully with a soft brush or a slightly damp pano.
- Protección contra po: Keep the speakers free from dust accumulation, especially around the drivers.
- Condicións ambientais: Use the speakers indoors only. Avoid exposure to direct sunlight, extreme temperatures, high humidity, or moisture.
- Protección do controlador: Avoid touching the speaker drivers directly, as this can cause damage.
5 Solución de problemas
If you encounter issues with your KEF R3 Meta speakers, consider the following common troubleshooting steps:
- Sen son:
- Comprobe todas as conexións dos cables entre os altofalantes e o ampAsegúrate de que estean seguros e conectados correctamente (positivo a positivo, negativo a negativo).
- Verifica o ampO adaptador está acendido e a fonte de entrada correcta está seleccionada.
- Asegúrese de que o volume do seu amplifier and source device is not muted or set too low.
- Son distorsionado:
- Reduce o volume do teu amplifier and source device. Overdriving the speakers can cause distortion.
- Comprobe as conexións do cable do altofalante para ver se hai algún fío solto ou curtocircuíto.
- Asegura o teu amplifier's power output is suitable for the speakers' impedance and power handling.
- Son desigual ou imaxe deficiente:
- Verify speaker placement. Ensure both speakers are equidistant from the listening position and have similar distances from side and rear walls.
- Comprobe que ambos altofalantes estean conectados coa polaridade correcta.
- Problemas de conexión Bluetooth:
- Ensure the speakers are in Bluetooth pairing mode (refer to your amplifier's manual for details on connecting to passive Bluetooth speakers if applicable, or the KEF app).
- Move the source device closer to the speakers to ensure it is within the 10-meter Bluetooth range.
- Tenta desvincular e volver vincular o dispositivo.
If problems persist, consult the KEF support resources or contact customer service.
6. Especificacións
| Característica | Especificación |
|---|---|
| Nome do modelo | R3 Meta |
| Número de modelo do artigo | R3WG |
| Tipo de altofalante | Estante para libros |
| Tipo de montaxe | Montaxe en andel |
| Cor | Branco |
| Dimensións do produto (P x A x A) | 13.2" x 16" x 16.6" (33.5 cm x 40.6 cm x 42.2 cm) |
| Peso do elemento | 28.4 Kilograms (62.5 pounds) per speaker |
| Impedancia | 4 ohmios |
| Potencia de saída máxima do altofalante | 400 vatios |
| Resposta de frecuencia (± 3dB) | 58 Hz - 28 kHz |
| Tipo de controlador de audio | Hybrid Driver (Uni-Q with MAT, Bass Driver) |
| Diámetro do woofer | 6.5 polgadas |
| Diámetro do tweeter | 25.4 Millimeters (integrated into Uni-Q) |
| Tecnoloxía de conectividade | Bluetooth |
| Alcance Bluetooth | 10 metros |
| Método de control | Aplicación |
| Uso interior/exterior | Interior |
| UPC | 637203049675 |
7. Que hai na caixa
Upon unpacking your KEF R3 Meta speakers, you should find the following items:
- 1 Pair of KEF R3 Meta Speakers
Please inspect all contents for any damage or missing parts immediately after opening.
8. Vídeo oficial do produto
Para unha vista superiorview of the KEF R Series Meta speakers and their innovative technologies, please watch the official product video below.
Official KEF R Series Meta product video, detailing design and technology. This video provides insights into the Metamaterial Absorption Technology (MAT) and Uni-Q driver array.
9. Garantía e soporte
Your KEF R3 Meta speakers are backed by a manufacturer's warranty to ensure your peace of mind.
- Tipo de garantía: 5 ano de garantía do fabricante.
For detailed warranty terms, product registration, technical support, or service inquiries, please visit the official KEF websitio web ou póñase en contacto directamente co servizo de atención ao cliente. Garde o comprobante de compra para reclamacións de garantía.





