WALI FTM-2 Full Motion TV Wall Mount Instruction Manual

1. Produto rematadoview

The WALI FTM-2 Full Motion TV Wall Mount is designed to securely hold most flat and curved screen televisions ranging from 32 to 70 inches. This mount offers extensive adjustability, including tilt, swivel, and extension, allowing for optimal viewing angles from various positions in a room. Constructed from reinforced cold-rolled steel, it ensures durability and stability for your television.

2. Información importante de seguridade

AVISO: Read all instructions carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, consult a qualified installer. Improper installation may cause serious injury or damage.

• Capacidade de peso: Non exceda a capacidade máxima de peso de 40 kg (88 lb). Este soporte está pensado para usarse só cos pesos máximos indicados. O uso con produtos máis pesados ​​que os pesos máximos indicados pode provocar inestabilidade e causar posibles lesións.
• Tipo de parede: This mount is designed for installation on vertical wood studs, solid concrete walls, or brick walls. NON instale só en paneles de yeso. Asegúrese de que a superficie de montaxe poida soportar con seguridade o peso combinado do equipo e de todos os accesorios conectados.
• Compatibilidade VESA: Asegúrate de que o patrón de montaxe VESA do teu televisor estea dentro do rango compatible (de 100 x 100 mm a 400 x 400 mm).
• Ferramentas: Use appropriate tools for installation. Always wear safety gear, including eye protection.
• Nenos: Manteña os nenos lonxe da zona de instalación. As pezas pequenas poden supoñer un perigo de asfixia.

Image: The mount is constructed from reinforced cold-rolled steel, tested to support up to 88 lbs, ensuring structural integrity and safety for your television.

3. Contido do paquete

Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact WALI customer support.

• WALI FTM-2 TV Wall Mount (1 unit)
• Kit de ferraxes de montaxe (varios parafusos, arandelas, espazadores, ancoraxes)
• Manual de usuario (este documento)

Image: All necessary hardware for installation is included, such as various bolts, washers, spacers, and wall anchors. A spirit level is also provided to assist with accurate mounting.

4. Comprobación de compatibilidade

Before installation, confirm your television and wall meet the following requirements:

• Tamaño TV: Compatible with most 32 to 70 inch flat or curved screen TVs.
• Peso da TV: Your TV must weigh no more than 88 lbs (40 kg).
• Patrón VESA: The mounting holes on the back of your TV must match VESA patterns from 100x100mm to 400x400mm.
• Tipo de parede: Suitable for 12" or 16" wood studs, concrete walls, and brick walls. Not for drywall-only installation.

Image: This diagram outlines the four key compatibility checks: TV weight (up to 88 lbs), VESA pattern (100x100mm to 400x400mm), TV size (32-70 inches), and suitable wall types (wood studs, concrete, brick). Installation on drywall alone is not supported.

5. Instrucións de instalación

Follow these steps carefully for a secure installation. It is recommended to have two people for installation.

Paso 1: Fixar o soporte á parede

1. Locate the desired mounting position on your wall. Use a stud finder to locate wood studs if applicable.
2. Mark the drill holes for the wall plate. Ensure the marks are level using a spirit level.
3. Drill pilot holes at the marked locations. For wood studs, use a 5/32 inch (4mm) drill bit. For concrete/brick walls, use a 3/8 inch (10mm) drill bit and insert wall anchors.
4. Fixe a placa de parede á parede cos parafusos e arandelas axeitados. Aperte ben.

Step 2: Attach Plate to TV

1. Lay your TV face down on a soft, clean surface to prevent scratches.
2. Identifique os orificios de montaxe VESA na parte traseira do televisor.
3. Select the correct screws, washers, and spacers from the hardware kit that fit your TV's mounting holes.
4. Attach the TV brackets to the back of your TV. Ensure they are securely fastened but do not overtighten.

Step 3: Hang TV on Bracket

1. Con axuda, levante con coidado o televisor e enganche os soportes do televisor á placa de parede.
2. Ensure the TV is centered and level.
3. Fixe o televisor á placa de parede usando os parafusos de seguridade ou os mecanismos de bloqueo incluídos.

6. Adjustments (Operating)

The WALI FTM-2 mount offers flexible adjustments to achieve your desired viewángulo de ing.

• Inclinación: The TV can be tilted +3° upwards and -15° downwards. Loosen the tilt adjustment knobs on the TV brackets, adjust to the desired angle, and then re-tighten the knobs.
• Xiratorio: The mount allows for a ±60° swivel (left and right) depending on TV size and wall distance. Gently push or pull the TV to the desired swivel angle.
• Nivelación: After installation, if the TV is slightly unlevel, you can adjust it by ±3°. Loosen the leveling screws, adjust the TV, and re-tighten.
• Extensión/Retracción: The mount extends from 2.6 inches (6.6 cm) to 14 inches (35.6 cm) from the wall. Gently pull the TV forward or push it back to adjust the distance.

Image: This diagram shows the full range of motion: 15 degrees of tilt, 60 degrees of swivel, extension up to 14 inches from the wall, and 4 degrees of leveling adjustment for a perfect viewexperiencia ing.

7. Mantemento

Un mantemento regular garante a lonxevidade e o funcionamento seguro do soporte de parede para TV.

• Comprobacións periódicas: Periodically check that all screws and connections are tight and secure. Re-tighten if necessary.
• Limpeza: Limpa a montura cun pano suave e seco. Evita produtos de limpeza abrasivos ou solventes que poidan danar o acabado.
• Pezas móbiles: The articulating arms are designed for smooth movement. No lubrication is typically required. If movement becomes stiff, check for obstructions or loose components.

8 Solución de problemas

Se tes problemas durante ou despois da instalación, consulta os seguintes problemas e solucións comúns:

• A televisión non está nivelada: Use the leveling adjustment feature (refer to Section 6) to correct the angle. Ensure the wall plate was installed level initially.
• A montaxe parece inestable: Double-check all wall and TV attachment screws to ensure they are securely tightened. Verify that the wall type is appropriate and that the TV weight does not exceed the mount's capacity.
• TV does not fit the mount: Re-check your TV's VESA pattern against the mount's specifications (refer to Section 4). Ensure you are using the correct screws and spacers for your TV model.
• Difficulty moving the arms: Ensure no cables are snagged or obstructing movement. Check for any overtightened bolts that might restrict articulation.

If problems persist, contact WALI customer support for assistance.

9. Especificacións

10. Garantía e atención ao cliente

WALI products are designed for quality and reliability. For warranty information or technical assistance, please contact WALI customer support.

WALI is committed to providing dedicated product support and aims to respond to inquiries within 12 hours.

• Contacto: Refer to the WALI official websitio web ou a embalaxe do produto para obter a información de contacto máis actualizada.
• Xustificante de compra: Conserve o comprobante de compra para reclamacións de garantía.