Introdución
This manual provides comprehensive instructions for the safe and proper installation and use of your Flexson Wall Mount for SONOS ERA100. Please read all instructions carefully before beginning installation.
The Flexson Wall Mount is designed to securely hold your SONOS ERA100 speaker, allowing for optimal sound positioning with its unique tilting mechanism and 80-degree swivel capability. It is constructed from durable alloy steel with a powder-coated finish.
Contido do paquete
Antes da instalación, comprobe que estean presentes todos os compoñentes:
- 1 x Flexson Wall Mount
- Manual de instrucións
- Fixings (screws, wall plugs)
- Corner Adapter (optional use)
Figura 1: Explotou view of the Flexson Wall Mount for SONOS ERA100, showing all included components and fixings for assembly.
Información de seguridade
- Ensure the mounting surface can support the combined weight of the mount and the SONOS ERA100 speaker.
- Utilizar ferramentas e equipos de seguridade adecuados durante a instalación.
- Se non ten dúbida sobre a instalación, consulte cun profesional cualificado.
- Manteña as pezas pequenas lonxe dos nenos.
Configuración e instalación
Follow these steps for proper installation of your Flexson Wall Mount:
- Escolla localización: Select a suitable wall location, ensuring it is structurally sound and free from electrical wires or plumbing.
- Marcar os puntos de perforación: Hold the wall bracket against the wall at the desired height and use a pencil to mark the drilling points.
- Perforación: Drill pilot holes at the marked points. The size of the drill bit will depend on the type of wall and the provided wall plugs.
- Inserir tacos de parede: Insira os tacos de parede axeitados nos orificios perforados.
- Fixar o soporte de parede: Secure the wall bracket to the wall using the provided screws. Ensure it is firmly attached.
- Assemble Speaker Cradle: Attach the speaker cradle components as per the diagram, ensuring all screws are tightened.
- Altofalante de montaxe: Carefully place your SONOS ERA100 speaker into the assembled cradle. The mount can be inverted to hold the speaker upside down if desired.
- Attach Speaker to Wall Bracket: Secure the speaker cradle with the speaker to the wall bracket. Ensure the locking mechanism is engaged.
- Axustar posición: Adjust the speaker's tilt (up to 20 degrees down) and swivel (80 degrees) to achieve the desired sound direction.
Figura 2: Fronte view of the Flexson Wall Mount securely holding a SONOS ERA100 speaker, demonstrating its discreet design.
Figura 3: Lado view of the mounted SONOS ERA100 speaker, highlighting the compact profile of the Flexson Wall Mount.
Figura 4: En ángulo view of the SONOS ERA100 speaker on the Flexson Wall Mount, showcasing its integration with the speaker's design.
Instrucións de funcionamento
Once installed, the Flexson Wall Mount allows for flexible positioning of your SONOS ERA100 speaker.
- Inclinación: The mount features a unique tilting mechanism. Gently adjust the speaker to tilt it downwards by up to 20 degrees to direct sound.
- Xiratorio: The mount allows for an 80-degree swivel (40 degrees left and 40 degrees right) to optimize sound direction. Carefully rotate the speaker to the desired angle.
- Montaxe invertida: The design allows the speaker to be mounted upside down if required for specific aesthetic or acoustic needs.
Figura 5: Lado de primeiro plano view illustrating the secure attachment and potential for adjustment of the SONOS ERA100 speaker on the Flexson Wall Mount.
Mantemento
The Flexson Wall Mount requires minimal maintenance.
- Limpeza: Limpa o soporte cun pano suave e seco para eliminar o po. Evita produtos de limpeza ou solventes abrasivos.
- Verificación periódica: Periodically check all screws and fixings to ensure they remain tight and secure.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| Mount feels loose on wall | Screws or wall plugs not properly secured. | Tighten all wall mounting screws. Ensure correct wall plugs were used for your wall type. |
| Speaker not stable in cradle | Cradle components not fully assembled or tightened. | Check all screws securing the speaker cradle. Ensure the speaker is correctly seated. |
| Difficulty adjusting tilt/swivel | Adjustment mechanism is too tight. | Do not force. Check the manual for specific adjustment points and loosen slightly if necessary. |
Especificacións
| Número de modelo | FLXE100WM1021 |
| Marca | Flexson |
| Altavoz compatible | SONOS ERA100 |
| Material | Aceiro de aliaxe |
| Cor | Negro |
| Tipo de acabado | Revestido en po |
| Dimensións do produto | 6.93 x 4.72 x 6.02 polgadas (17.6 x 12 x 15.3 cm) |
| Peso do elemento | 14.4 onzas (0.41 kg) |
| Capacidade de carga | 14.2 libras (6.44 kg) |
| Axuste de inclinación | Up to 20 degrees downwards |
| Axuste xiratorio | 80 degrees (40 degrees left, 40 degrees right) |
Garantía e Soporte
For warranty information and technical support, please refer to the official Flexson websitio web ou póñase en contacto co seu departamento de atención ao cliente. Garde o recibo da compra como proba de compra.
Fabricante: Flexson
Websitio: Visit the Flexson Store on Amazon (para información xeral da marca)
