Información importante de seguridade
This device is intended for professional use only. Always follow proper sterilization procedures and local health regulations. For external use only. Keep out of reach of children.
Contido do paquete
- Bolígrafo de tatuaxe BRONC V8
- Large Capacity Battery (pre-installed)
- Cable de carga tipo C
- Adaptador RCA
- Maletín de transporte
Image: The BRONC V8 Tattoo Machine kit, showcasing the pen, its dedicated carrying case, and the included RCA adapter.
Produto rematadoview
The BRONC V8 is a rotary tattoo machine designed for precision and efficiency. It features a coreless Swiss DC motor and offers dual-mode operation, allowing use with its built-in battery or via an RCA adapter. The machine includes a convenient button for presetting and switching between two voltage niveis.
Imaxe: Unha parte frontal detallada view of the BRONC V8 Rotary Tattoo Machine, highlighting its digital display and control interface.
Especificacións
| Parámetro | Valor |
|---|---|
| Material | Aluminio de calidade aeronáutica |
| Ictus | 4.0 mm |
| Profundidade da agulla | 0-5.0 mm |
| Motor | Motor de corrente continua suízo |
| Velocidade sen carga | 11,000 rpm |
| Voltage Saída | 4.5 V-11.0 V |
| Recommended Working Voltage | 5.5 V-7.5 V |
| Capacidade da batería | 2000 mAh |
| Support Work Time | 7.0-9.0 hours (Test Results) |
| Especificación da batería | 7V 18500 Li-ion |
| Dimensións (diámetro x lonxitude) | 32 x 141 mm |
| Peso (bolígrafo con batería) | 227 g |
Configuración
1. Instalación e carga da batería
- Asegúrese de que a máquina estea apagada.
- Unscrew the battery cap at the bottom of the pen.
- Insert the 18500 Li-ion battery with the positive (+) terminal facing inwards.
- Volva a roscar firmemente a tapa da batería.
- To charge, connect the Type-C charging cable to the port on the machine and to a suitable USB power source. The display will indicate charging status.
2. Needle Cartridge Installation
- Select a compatible needle cartridge.
- Gently push the needle cartridge into the front opening of the machine until it clicks into place.
- Ensure the cartridge is seated firmly and does not wobble.
3. Adjusting Needle Depth
Rotate the grip section of the machine clockwise or counter-clockwise to adjust the needle depth from 0mm to 5.0mm. The grip features a click mechanism for precise adjustments.
4. Using the RCA Adapter (Optional)
For wired operation, remove the battery cap and battery. Attach the RCA adapter to the bottom of the machine. Connect an RCA cable from the adapter to an external power supply.
Image: A hand demonstrating the proper grip on the BRONC V8 Tattoo Machine, with a needle cartridge installed.
Operación
1. Acendido/apagado
- To power on, press and hold the power button (usually the central button) until the display illuminates.
- Para apagar, manteña premido o botón de acendido de novo ata que a pantalla se apague.
2. Axuste Voltage
- Use the '+' and '-' buttons to increase or decrease the voltage.
- O voltage output ranges from 4.5V to 11.0V. The recommended working voltage é 5.5V-7.5V.
3. Using Dual Voltage Presets
The BRONC V8 allows you to preset and quickly switch between two preferred voltages. Consult the specific button layout on your device for the preset function. Typically, a dedicated button or a long press on a voltage button activates this feature.
4. Switching Operation Modes
The machine can operate wirelessly with the built-in battery or wired using the RCA adapter and an external power supply. Switch between modes by either installing the battery or the RCA adapter as described in the Setup section.
Imaxe: Un estilo de raios X view of the BRONC V8 Tattoo Machine, illustrating its internal coreless motor and electronic components.
Mantemento
Limpeza
- Always disconnect the machine from any power source before cleaning.
- Limpe o exterior da máquina cun pano limpo,amp cloth and a mild, non-abrasive disinfectant.
- Do not immerse the machine in liquid.
- Asegúrese de que todas as superficies estean secas antes do almacenamento ou do seguinte uso.
Almacenamento
- Store the machine in its carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
- Retire a batería se a garda durante períodos prolongados para evitar que se descargue.
Resolución de problemas
A máquina non se acende
- Comprobar a batería: Asegúrese de que a batería estea correctamente instalada e completamente cargada.
- Conexión RCA: If using the RCA adapter, verify it is securely connected to both the machine and the power supply.
Voltage Not Adjusting
- Función do botón: Ensure the '+' and '-' buttons are pressed firmly.
- Ciclo de enerxía: Try turning the machine off and on again.
Machine Vibrates Excessively or Makes Unusual Noise
- Needle Cartridge: Check if the needle cartridge is properly seated and not damaged. Replace if necessary.
- Problema interno: Se o problema persiste, deixe de usar e póñase en contacto co servizo de atención ao cliente.
Garantía e Soporte
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official BRONC websitio. Garda o comprobante de compra para calquera reclamación de garantía.
