1. Introdución
This manual provides essential information for the proper installation, operation, and maintenance of your Integy WP-S16-RTR 25A Waterproof Brushless Electronic Speed Controller (ESC). Designed for 1/16 and 1/18 scale RC cars, this ESC offers reliable performance with 2S or 3S LiPo battery compatibility. Please read this manual thoroughly before use to ensure safe and optimal performance.
2. Instrucións de seguridade
Adherence to the following safety guidelines is crucial for preventing damage to the ESC, other components, and personal injury.
- Seguridade da batería: Always use batteries within the specified voltage range (2-3S LiPo or 6-9 cells NiMH). Incorrect voltage pode causar danos graves.
- Polaridade: Ensure correct battery polarity when connecting. Reverse polarity will damage the ESC.
- Clasificación impermeable: While this ESC is waterproof, it is not designed for prolonged submersion. Always dry the ESC thoroughly after exposure to moisture to prevent corrosion.
- Compatibilidade do motor: Use only with compatible brushless motors as specified in the 'Specifications' section.
- Ventilación: Asegúrese de que o fluxo de aire arredor do ESC sexa axeitado durante o funcionamento para evitar o sobrequecemento.
- Desconexión: Always disconnect the battery from the ESC when not in use to prevent accidental activation and battery discharge.
- Nenos: This product is not a toy. Keep out of reach of children under 15 years of age. Adult supervision is recommended during operation.
3. Produto rematadoview
The Integy WP-S16-RTR ESC is a compact and robust electronic speed controller designed for various RC applications. It features a durable casing and integrated wiring for motor, battery, and receiver connections.
Imaxe 3.1: Arriba view of the Integy WP-S16-RTR 25A Waterproof Brushless ESC, showing the main unit, motor wires (blue, yellow, orange connectors), battery wires (red, black), and receiver wire with power switch.
Os compoñentes clave inclúen:
- ESC Unit: The main control module.
- Cables do motor: Three wires (typically blue, yellow, orange) for connecting to a brushless motor.
- Cables da batería: Red (+) and Black (-) wires for connecting to the battery.
- Receiver Wire (Rx Wire): Connects to the throttle channel of your RC receiver.
- Interruptor de alimentación: Integrated switch for turning the ESC on and off.
- Built-in BEC: Provides regulated 6V/1A power to the receiver and servos.
4. Configuración e instalación
Follow these steps for proper installation of the ESC into your RC vehicle.
- Montaxe do ESC: Securely mount the ESC in your vehicle using double-sided tape or zip ties, ensuring it is protected from excessive vibration and impact. Allow for adequate ventilation.
- Conexión do motor: Connect the three motor wires from the ESC to the corresponding wires on your brushless motor. The order of connection may affect motor rotation direction; if the motor spins in the wrong direction, swap any two of the three motor wires.
- Conexión do receptor: Plug the receiver wire (Rx Wire) from the ESC into the throttle channel (usually channel 2) of your RC receiver.
- Conexión da batería: Connect your battery pack to the battery wires of the ESC, ensuring correct polarity (red to positive, black to negative).
- Initial Calibration (Throttle Range):
- Turn on your transmitter and ensure the throttle trim is at neutral.
- With the ESC power switch off, connect the battery.
- Press and hold the ESC's power button (if applicable, or follow specific calibration instructions for your model if different).
- Turn on the ESC. Release the button when the LED flashes.
- Move the throttle stick to full throttle and hold. The ESC will beep.
- Move the throttle stick to full brake/reverse and hold. The ESC will beep again.
- Return the throttle stick to neutral. The ESC will beep, indicating calibration is complete.
5. Instrucións de funcionamento
Once installed and calibrated, your ESC is ready for operation.
- Encendido: Turn on your RC transmitter first, then turn on the ESC using its power switch.
- Condución: Operate your vehicle using the transmitter's throttle and steering controls.
- Apagado: Always turn off the ESC first, then turn off your transmitter. Disconnect the battery immediately after use.
- Protección contra sobrecalentamento: The ESC features built-in overheat protection. If the ESC becomes too hot, it may reduce power or shut down temporarily. Allow it to cool before resuming operation.
- Baixo Voltage Cutoff (LVC): For LiPo batteries, the ESC has an LVC feature to prevent over-discharge. When the battery voltage drops below a safe level, the ESC will reduce power or cut off to protect the battery.
6. Mantemento
Regular maintenance ensures the longevity and performance of your ESC.
- Limpeza: After each use, especially in dusty or wet conditions, clean the ESC. Use a soft brush or compressed air to remove dirt and debris. For wet conditions, ensure the ESC is completely dry before storage or next use.
- Inspección: Inspeccione periodicamente todos os cables e conectores para detectar signos de desgaste, desgaste ou corrosión. Substitúa os compoñentes danados inmediatamente.
- Almacenamento: Store the ESC in a cool, dry place away from direct sunlight and extreme temperatures. Always disconnect the battery before storage.
7 Solución de problemas
Consulta esta sección para coñecer os problemas comúns e as súas posibles solucións.
| Problema | Causa posible | Solución |
|---|---|---|
| Motor does not run or runs intermittently. |
|
|
| O motor funciona na dirección incorrecta. | Incorrect motor wire connection order. | Intercambia dous dos tres cables do motor entre o ESC e o motor. |
| O ESC sobrequéntase. |
|
|
| Vehicle stops or loses power suddenly. |
|
|
8. Especificacións
Detailed technical specifications for the Integy WP-S16-RTR 25A Waterproof Brushless ESC.
- Corrente continua: 25A
- Corrente de explosión: 90A
- Resistencia: 0.005 ohmios
- Car Applicable: 1/16, 1/18 Scale RC Cars
- Motor Limit (2S LiPo / 6 cells NiMH):
- On-road: ≥12T
- Off-road: ≥18T
- Motor Size: 2040 Size Motor
- Motor Limit (3S LiPo / 9 cells NiMH):
- On-road: ≥18T
- Off-road: ≥24T
- Motor Size: 2040 Size Motor
- Built-in BEC: 6V/1A (modo de conmutación)
- Program Port: Rx Wire
- Dimensións: 36 mm x 28 mm x 21 mm
- Peso neto: 38 g
- Número de modelo do artigo: C31589
9. Garantía e soporte
For warranty information, technical support, or replacement parts, please visit the official Integy websitio web ou póñase en contacto co seu departamento de atención ao cliente. Garde o recibo da compra como proba de compra.
Official Integy Websitio: www.integy.com
