Produto rematadoview
The Nilight TR-155 LED Trailer Light Kit provides comprehensive lighting solutions for various 12V DC vehicles, including trailers, boats, trucks, RVs, and more. This kit includes all necessary components for stop, turn, tail, side marker, and license plate lighting, ensuring compliance and safety on the road.
Contido do paquete
Verifique que todos os compoñentes que se indican a continuación estean incluídos no paquete:
- 2 x Square LED Trailer Lights
- 1 x 16-inch Red LED Brake Light Bar
- 2 x Red Side Marker Lights
- 4 x Amber Side Marker Lights
- 1 x 25ft Trailer Wiring Harness
- 1 x License Plate Bracket
- 4 x reflectores
- 1 x Hardware Pack (includes wire nuts, wire clips, self-tapping screws, ring connectors, splice connectors, screws)
Instrucións de instalación
Dimensións dos compoñentes
Refer to the following diagrams for component dimensions to ensure proper fitment:
Montaxe
The square lights are designed for stud mounting. Ensure a firm and durable installation by tightening the mounting nuts securely. The side marker lights and the 16-inch brake light bar are installed using screws.
Conexións de cableado
Proper wiring is crucial for the correct function of the trailer lights. Refer to the diagram and instructions below. If an existing trailer harness is present, connect color-to-color. For new installations, use the provided two-wire bundle.
- Square Lights:
- White wire: Ground (Negative)
- Brown wire: Running Light (Positive)
- Yellow wire: Left Turn and Brake Light (Positive)
- Green wire: Right Turn and Brake Light (Positive)
- 16-Inch Brake Light Bar:
- White wire: Ground (Negative)
- Black wire: Low Brightness Tail Light (Positive)
- Red wire: High Brightness Brake Light (Positive)
- Side Marker Lights:
- White wire: Ground (Negative)
- Black wire: Positive
Funcións operativas
The Nilight TR-155 LED Trailer Light Kit provides multiple lighting functions for safe trailer operation:
- Luces de funcionamento: Activated with vehicle headlights, providing continuous illumination.
- Stop/Brake Lights: Illuminate brightly when the vehicle's brakes are applied.
- Turn Signal Lights: Flash to indicate turns or lane changes.
- Side Marker Lights: Provide additional visibility along the sides of the trailer.
- License Plate Light: Illuminates the license plate for visibility.
Coidados e Mantemento
To ensure the longevity and optimal performance of your Nilight LED Trailer Light Kit, follow these maintenance guidelines:
- Inspección periódica: Periodically check all lights for proper function, including running, brake, turn signal, and marker lights.
- Comprobación do cableado: Inspect wiring for any signs of wear, corrosion, or loose connections. Secure any loose wires and repair damaged insulation.
- Limpeza: Clean the light lenses regularly with a soft cloth and mild soap solution to remove dirt and debris. Avoid abrasive cleaners that could scratch the lens.
- Impermeabilización: While the lights are highly waterproof, ensure that all seals and connections remain intact. The square lights feature water drainage notches; ensure these are not obstructed.
- Hardware: Periodically check mounting hardware for tightness and corrosion. Replace any corroded or damaged fasteners.
Resolución de problemas
If you encounter issues with your trailer light kit, refer to the following common problems and solutions:
| Problema | Causa posible | Solución |
|---|---|---|
| Luces que non iluminan | No power, faulty wiring, blown fuse, damaged light unit | Check vehicle's fuse box, verify all wiring connections (ground, positive), test light unit with a known good power source. |
| As luces atenuadas ou parpadeantes | Mala conexión á terra, alimentación insuficiente, cableado solto | Ensure ground wire is securely attached to a clean, unpainted metal surface. Check for corrosion on terminals. Verify power supply. |
| Incorrect light function (e.g., brake light acts as turn signal) | Conexións de cableado incorrectas | Re-check wiring against the provided diagram, ensuring each wire is connected to its correct function. |
| Auga dentro da carcasa da luz | Damaged seal, obstructed drainage notch | Inspect seals for damage. Clear any obstructions from the water drainage notches. If damage is severe, replacement may be necessary. |
Especificacións do produto
- Modelo: TR-155
- Marca: Noiteiro
- Voltage: 12V DC
- Wattage: 4.44 vatios
- Tipo de fonte de luz: LED (2835 and 5050 SMD LEDs)
- Material: Lente de policarbonato
- Clasificación impermeable: Highly sealed and waterproof design with drainage notches
- Tipo de servizo de vehículos: Bus, Snowmobile, Trailer, Truck, RV, Marine, Pickups, Camper, Tractors
- Max Vehicle Width: 80 polgadas
- Peso do artigo: 2.97 libras
- Dimensións do paquete: 15.79 x 10.79 x 5.08 polgadas
- Montaxe necesaria: Non
- Tipo de axuste para automóbiles: Ajuste universal
Garantía e Atención ao Cliente
Nilight products are designed for durability and performance. For warranty information or technical assistance, please refer to the official Nilight websitio web ou póñase en contacto directamente co servizo de atención ao cliente. Garde o recibo de compra para reclamacións de garantía.
For further assistance, visit the official Nilight store: Tenda Nilight en Amazon.
