1. Introdución
The Numark Mixstream Pro Go is a battery-powered, standalone 2-deck DJ controller designed for ultimate portability and performance. It features integrated Wi-Fi for music streaming, built-in speakers, a 7-inch HD touchscreen, and comprehensive controls for mixing and performing.
This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Mixstream Pro Go controller. Please read this manual thoroughly before using the device to ensure proper operation and to maximize its lifespan.
Figura 1.1: Fronte view of the Numark Mixstream Pro Go Portable DJ Controller, showcasing its dual decks, central mixer, and touchscreen display.
2. Que hai na caixa
- Mixstream Pro Go DJ Controller
- Adaptador de alimentación
- IEC-Cable
- Cable USB
- Adhesivo
- Guía do usuario (este manual)
- Información de seguridade e garantía
3. Configuración
3.1 Carga inicial
Before first use, fully charge the internal battery. Connect the included power adapter to the DC input on the rear panel of the Mixstream Pro Go and plug it into a power outlet. The charging indicator LED will show the charging status.
Figure 3.1: Rear panel of the Mixstream Pro Go, highlighting the power input, USB ports, and audio outputs.
3.2 Acendido/Apagado
To power on the unit, press and hold the Power button located on the rear panel until the screen illuminates. To power off, press and hold the Power button until the shutdown prompt appears on the screen, then confirm.
3.3 Conexións de audio
- Saídas principais: Connect your main speakers to the balanced XLR outputs or RCA outputs on the rear panel.
- Auriculares: Plug your headphones into either the 1/4" or 1/8" headphone jacks on the front of the unit. Adjust headphone volume using the dedicated control.
- Micrófono: Connect a microphone to the 1/4" mic input on the front. Adjust mic volume with its dedicated knob.
Figura 3.2: Fronte view of the Mixstream Pro Go, showing the headphone and microphone input jacks.
3.4 Media Storage
The Mixstream Pro Go supports music playback from SD cards and USB drives. Insert your prepared media into the respective slots on the rear panel.
Figure 3.3: Close-up of the USB and SD card input slots on the rear of the controller.
4. Instrucións de funcionamento
Navegación con pantalla táctil 4.1
The 7-inch HD touchscreen is your primary interface for browsing music, viewing waveforms, and accessing settings. Use swipe gestures and taps to navigate menus and select tracks.
Figure 4.1: A hand interacting with the multi-gesture HD touchscreen to browse music and waveforms.
4.2 Wi-Fi and Music Streaming
Connect to a Wi-Fi network via the settings menu on the touchscreen. Once connected, you can access various music streaming services such as Amazon Music Unlimited, Apple Music, TIDAL, Beatport, Beatsource, and SoundCloud Go+ (subscriptions may be required).
Figure 4.2: The Mixstream Pro Go's screen showing available music streaming services.
4.3 Basic Mixing Controls
- Rodas de avance: Use the 6-inch jog wheels for scratching, nudging, and searching within tracks.
- Faders: Adjust track volume with the channel faders and crossfade between decks using the crossfader.
- Botóns de ecualización: Each deck has 3-band EQ knobs (High, Mid, Low) to shape the sound.
- FX Paddles: Engage instant effects using the FX paddles.
- Pads de rendemento: The 4 dual-layer performance pads per deck allow for hot cues, auto loops, saved loops, and roll functions.
Figura 4.3: En ángulo view of the Mixstream Pro Go, highlighting the jog wheels, mixer section, and performance pads.
4.4 Standalone Stems Functionality
The Mixstream Pro Go supports standalone Stems functionality, allowing you to isolate or remove vocal, melody, bass, and drum elements from tracks. Tracks or playlists must be pre-rendered using Engine DJ Desktop software and then imported to your device. A one-time software license purchase applies for this feature.
Figure 4.4: Visual representation of the Stems feature, enabling real-time separation of musical elements.
4.5 Smart Home Lighting Control
The Mixstream Pro Go can wirelessly connect to and control Philips Hue, Nanoleaf, and DMX smart home lighting systems. Use the on-screen controls to select colors and lighting modes, synchronizing your light show with your music.
Figure 4.5: The Mixstream Pro Go controlling smart lighting, creating an immersive DJ experience.
4.6 Using as a Controller for Serato DJ and Virtual DJ
The Mixstream Pro Go can also function as a controller for Serato DJ and Virtual DJ software, offering 1:1 hardware to software integrations for a seamless experience.
Figure 4.6: The Mixstream Pro Go connected to a laptop, demonstrating its use as a controller for external DJ software.
5. Mantemento
5.1 Limpeza
Regularly clean the surface of the Mixstream Pro Go with a soft, dry, lint-free cloth. Avoid using abrasive cleaners, solvents, or strong chemicals, as these can damage the finish and components. For the touchscreen, use a screen-specific cleaning solution and a microfiber cloth.
5.2 Almacenamento
When not in use, store the controller in a cool, dry place away from direct sunlight and extreme temperatures. If transporting, use a protective case to prevent damage.
5.3 Coidado coa batería
To prolong battery life, avoid fully discharging the battery frequently. If storing for an extended period, charge the battery to approximately 50% and recharge every few months.
6 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A unidade non se acende. | Battery is depleted or power adapter is not connected/faulty. | Connect the power adapter and allow the unit to charge. Ensure the power adapter is securely connected and the outlet is functional. |
| No sound from speakers/outputs. | Volume levels are too low, cables are incorrectly connected, or output selection is wrong. | Check Master Volume, Channel Faders, and Crossfader positions. Ensure audio cables are securely connected to the correct outputs. Verify that the main output is selected if using external speakers. |
| Problemas coa conexión wifi. | Incorrect Wi-Fi password, out of range, or network interference. | Double-check the Wi-Fi password. Move the unit closer to the Wi-Fi router. Try restarting the router and the Mixstream Pro Go. |
| Media (USB/SD) not recognized. | Improperly formatted media, corrupted files, or incompatible file tipos. | Ensure media is formatted to a supported file system (FAT32, exFAT, NTFS). Check for corrupted files. Use supported audio formats (MP3, WAV, FLAC, AIFF). |
7. Especificacións
| Característica | Detalle |
|---|---|
| Número de modelo | MIXSTREAM PRO GO |
| Dimensións (D x W x H) | 11.81" x 22.24" x 2.91" (29.99 cm x 56.49 cm x 7.39 cm) |
| Peso | 9.24 libras (4.2 kg) |
| Fonte de enerxía | Battery Powered (Built-in rechargeable Lithium Ion battery) / 12V/3.0A Power Adapter |
| Conectividade | Wi-Fi, USB (for media and computer connection), Bluetooth Audio In |
| Mostrar | 7-inch Multi-gesture HD Touchscreen |
| Saídas de audio | Balanced XLR Main Outs, RCA Main Outs, 1/4" Headphone Out, 1/8" Headphone Out |
| Entradas de audio | 1/4" Microphone In |
| Slots multimedia | SD Card Slot, 2x USB Ports |
| Características | Built-in Speakers, Stem Separation (via Engine DJ Desktop), Smart Lighting Control (Philips Hue, Nanoleaf, DMX) |
8. Garantía e soporte
8.1 Información da garantía
For detailed warranty information, please refer to the "Safety & Warranty Information" document included in your product packaging or visit the official Numark websitio:
8.2 Atención ao cliente
If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact Numark customer support. Contact details can typically be found on the official Numark websitio web ou na documentación do produto.
You can also visit the Numark store for additional resources and product information:
9. Vídeos oficiais de produtos
Below are official product videos from the seller that provide additional visual guidance and demonstrations of the Numark Mixstream Pro Go's features.
No official seller videos are available for embedding at this time based on the provided data.
