1. Introdución
The Sans HEPA 13 Air Purifier is designed to provide cleaner, healthier air in your home or workplace. It features advanced filtration technology to effectively remove airborne particles and improve indoor air quality.
Características principais:
- Amplia cobertura: Purifies air in spaces up to 1560 sq. ft. every hour.
- Sistema de filtración avanzado: Equipped with a pre-filter, medical-grade HEPA 13 filter, activated carbon filter, and a powerful internal UV-C light.
- Protección integral: Removes over 99.9% of particles down to 0.1 microns, including pollutants, allergens, dust, dander, harmful chemicals, gases, odors, and smoke.
- Funcionamento silencioso: Designed for ultra-quiet performance, especially in sleep mode.
- Smart Auto-Mode: Utilizes precise sensors to measure air quality and automatically adjusts fan settings for optimal purification and energy efficiency.
- Air Quality Display: Features an easy-to-read display showing the Air Quality Index (AQI) in real-time.
2. Configuración
- Unpack the Purifier: Retire con coidado o purificador de aire da súa embalaxe. Asegúrese de retirar todos os materiais de embalaxe.
- Posicionamento: Place the air purifier on a flat, stable surface in the desired room. For optimal performance, ensure there is adequate space around the air intake and outlet vents.
- Instalación do filtro: The filter is typically pre-installed but may require removal of protective packaging. Refer to the 'Maintenance' section for detailed filter access instructions. Ensure the filter is correctly seated before closing the cover.
- Conexión de alimentación: Enchufe o cable de alimentación nunha toma eléctrica estándar.
3. Instrucións de funcionamento
The Sans HEPA 13 Air Purifier features an intuitive control panel located on the top of the unit.
- Encendido/apagado: Preme o ON/OFF botón para acender ou apagar a unidade.
- Selección de modo: Preme o MODO button to cycle through different operating modes: Auto, Low, Medium, High.
- Modo automático: In Auto-Mode, the purifier uses precise sensors to detect real-time air quality and automatically adjusts the fan speed to maintain optimal air purification.
- Función de temporizador: Usa o TEMPORIZADOR button to set the operating duration (e.g., 2, 4, or 8 hours). The unit will automatically shut off after the set time.
- Control de luz: O LUZ button controls the ambient light feature. Press to turn the light on or off.
- Modo de suspensión: When activated, Sleep Mode operates the purifier at its lowest, quietest setting and turns off all display lights to ensure an undisturbed sleeping environment.
- Indicador de calidade do aire (AQI): The digital display shows the current Air Quality Index (AQI) in your space. A lower number indicates cleaner air. The color of the top light ring may also change to reflect air quality (e.g., blue for good, red for poor).
- Luz UV-C: The internal UV-C light provides an additional layer of air purification. It can be toggled on or off via the control panel.
Vídeo oficial do produto:
4. Mantemento
Regular maintenance ensures the longevity and optimal performance of your Sans HEPA 13 Air Purifier.
Substitución do filtro:
The air purifier is equipped with a filter replacement indicator that will illuminate when it's time to change the filter. It is generally recommended to replace the filter every 3 months, depending on usage and air quality.
- Apagado: Apague e desconecte sempre o purificador de aire antes de realizar calquera mantemento.
- Acceso ao compartimento do filtro: Locate the filter access panel, typically on the back or bottom of the unit. Open the panel by pressing the release tab or rotating the base as indicated in the diagram.
- Eliminar o filtro antigo: Carefully pull out the used filter by its tabs. Dispose of the old filter responsibly.
- Instalar novo filtro: Remove the new filter from its protective packaging. Insert the new filter into the compartment, ensuring it is seated correctly.
- Pechar o panel: Peche ben o panel de acceso ao filtro.
- Restablecer o indicador do filtro: After replacing the filter, press and hold the filter reset button (often combined with another function button) for a few seconds until the indicator light turns off.
Limpeza do exterior:
Limpe o exterior do purificador de aire cun pano suave e seco. Non empregue produtos de limpeza abrasivos nin solventes.
5 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A unidade non se acende | No power; power cord not properly connected. | Asegúrate de que o cable de alimentación estea conectado correctamente a unha toma de corrente que funcione. Comproba o interruptor de alimentación. |
| Mal rendemento da purificación do aire | Clogged filter; incorrect mode setting. | Replace the filter if the indicator is on. Select a higher fan speed or Auto-Mode. |
| Ruído insólito | Obstrución no ventilador; a unidade non está sobre unha superficie estable. | Turn off and unplug the unit. Check for any foreign objects. Place on a stable surface. |
| Air Quality Index (AQI) remains high | High level of pollutants; unit not running long enough. | Allow the unit to run longer, especially in Auto-Mode. Ensure proper room size coverage. |
6. Especificacións
- Número de modelo: Sans Purificatore d'aria HEPA 13
- Dimensións do produto: 10" D x 11.5" W x 20" H
- Peso do artigo: 14 libras
- Fonte de enerxía: Eléctrico con cable
- Cor: Medianoite
- Tipo de filtro: Pre-Filter, Medical Grade HEPA 13, Activated Carbon, UV-C Light
- Área de cobertura: Up to 1560 sq. ft. per hour
7. Garantía e soporte
For warranty information and customer support, please refer to the product packaging or contact Sans customer service directly. Keep your purchase receipt for warranty claims.
