Introdución
Thank you for choosing the KEPLUG 8.7-inch Wired Motion Sensor LED Ceiling Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. This product features a built-in motion and light sensor, adjustable color temperature, and multiple operating modes, designed for various indoor applications.
Image: Two KEPLUG 8.7-inch wired motion sensor LED ceiling lights, showcasing their round, flush-mount design and integrated sensor modules.
Configuración e instalación
This KEPLUG LED ceiling light is designed for hardwired installation on either ceilings or walls. Please ensure the power supply is turned off at the circuit breaker before beginning installation. It is recommended that installation be performed by a qualified electrician.
Pasos previos á instalación:
- Seleccione a temperatura da cor: Before mounting, locate the color temperature switch on the back of the light fixture. Slide the switch to select your desired color temperature: 3000K (Warm White), 4000K (Natural White), or 6000K (Cool White). This setting cannot be changed after installation without removing the fixture.
- Ferramentas de recollida: Ensure you have the necessary tools, including a screwdriver, wire strippers, and electrical tape.
Pasos de instalación:
- Instalar soporte de montaxe: Secure the provided mounting bracket to the ceiling or wall junction box using the screws and anchors. Ensure the bracket is firmly attached and level.
- Conectar cableado: Connect the household electrical wires to the corresponding wires on the light fixture using the provided wire nuts. Typically, black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Ensure all connections are secure.
- Fixar a lámpada: Align the light fixture with the installed mounting bracket. Push the fixture upwards and twist clockwise until it locks securely into place. Ensure the fixture is flush against the mounting surface.
- Restaurar enerxía: Unha vez que o dispositivo estea instalado de forma segura, restableza a alimentación no disyuntor.
Image: Illustration showing the mounting bracket being secured to the ceiling with screws and anchors.
Image: Hands demonstrating the easy lock installation method, showing the light fixture being twisted onto the mounting bracket.
Instrucións de funcionamento
Your KEPLUG motion sensor LED ceiling light offers adjustable settings for optimal performance.
Modos de funcionamento:
The light fixture features a slide switch on the side to select between three operating modes:
- Modo ON: The light functions as a standard ceiling lamp, remaining continuously on. It can be controlled via your wall switch. Motion sensing is disabled in this mode.
- Modo OFF: A luz está apagada.
- Modo AUTOMÁTICO: This mode activates the motion and light sensors. The light will turn on automatically when motion is detected in low ambient light conditions.
Image: Visual representation of the three operating modes (ON, OFF, AUTO) and how they affect the light's behavior based on ambient light and motion.
Motion Sensor Functionality (AUTO Mode):
In AUTO mode, the built-in microwave motion sensor detects movement within a 120-degree angle and a range of 9-18 feet. The light will activate when motion is detected and the ambient light is low. After motion ceases, the light will remain on for a set duration before automatically turning off.
Configuración do temporizador axustable:
The light offers three adjustable timer settings for how long it remains on after motion is no longer detected:
- 30 segundos
- 120 segundos
- 180 segundos
To adjust the timer, locate the small slide switch next to the motion sensor on the light fixture and select your preferred duration.
Image: Illustration detailing the motion sensor's detection angle and range, along with the switch for selecting the 30s, 120s, or 180s auto-off timer.
Selección de temperatura de cor:
As mentioned in the setup, the color temperature (3000K Warm White, 4000K Natural White, 6000K Cool White) is selected via a switch on the back of the fixture prior to installation.
Image: A visual comparison of the three selectable color temperatures: 3000K Warm White, 4000K Natural White, and 6000K Cool White, as emitted by the light fixture.
Mantemento
To ensure the longevity and optimal performance of your KEPLUG LED ceiling light, follow these simple maintenance guidelines:
- Limpeza: Disconnect power to the fixture before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface of the light. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.
- Inspección: Inspeccione periodicamente a instalación para detectar calquera sinal de danos ou conexións soltas. Se atopa algún problema, consulte cun electricista cualificado.
- Substitución da lámpada: This fixture uses integrated LED technology, meaning the LED bulbs are not user-replaceable. The LEDs are designed for a long lifespan (over 30,000 hours).
Resolución de problemas
If you encounter issues with your KEPLUG motion sensor LED ceiling light, refer to the following common problems and solutions:
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non acende. | Sen fonte de alimentación. Seleccionouse o modo incorrecto. Sufficient ambient light (in AUTO mode). | Comprobe o disxuntor e o interruptor de parede. Asegúrese de que o selector de modo estea en "ON" ou "AUTO". In 'AUTO' mode, the light will only activate in low light conditions. Test in a darker environment. |
| O sensor de movemento non detecta movemento. | Light is not in 'AUTO' mode. Obstrución na área de detección. A luz ambiental é demasiado alta. Motion is outside detection range/angle. | Ensure the mode switch is set to 'AUTO'. Limpar calquera obxecto que bloquee o sensor view. The sensor is designed to activate in low light. If the area is bright, it will not turn on. Ensure motion occurs within the 9-18 feet range and 120-degree angle. |
| A luz apágase demasiado rápido ou permanece acesa demasiado tempo. | Configuración incorrecta do temporizador. | Adjust the timer switch on the fixture to 30s, 120s, or 180s as desired. |
| Difficulty with mounting. | Mounting surface is not flat. | Ensure the ceiling or wall surface is perfectly flat for proper alignment and secure attachment of the fixture. |
Especificacións do produto
| Característica | Detalle |
|---|---|
| Marca | KEPLUG |
| Nome do modelo | motion sensor ceiling light |
| Dimensións do produto | 8.66"L x 8.66"W x 1.11"H (22cm diameter, 2.5cm thickness) |
| Peso do elemento | 2.01 libras (0.91 quilogramos) |
| Wattage | 18 vatios |
| Brillo | 1600 lúmenes |
| Temperatura da cor | 3000K (Warm White), 4000K (Natural White), 6000K (Cool White) - Adjustable |
| Fonte de enerxía | CA (cableado) |
| Voltage | 110 voltios |
| Características especiais | Adjustable Color Temperature, Energy Efficient, Motion Sensor, Timer, Water Resistant |
| Ángulo de detección do sensor de movemento | 120 graos |
| Rango de detección do sensor de movemento | 9-18 pés (aprox. 3-5 metros) |
| Tipo de instalación | Montar a lavar |
| Material | Plástico ABS |
| Uso interior/exterior | Interior |
| Vida útil | Máis de 30,000 horas |
| Compoñentes incluídos | Hardware de montaxe |
Image: Technical drawing illustrating the dimensions of the KEPLUG ceiling light, showing a diameter of 22cm and a thickness of 2.5cm.
Información da garantía
For detailed warranty information regarding your KEPLUG Motion Sensor LED Ceiling Light, please refer to the product packaging or contact KEPLUG customer support directly. Warranty terms and conditions may vary.
Atención ao cliente
If you have any questions, require technical assistance, or need further support with your KEPLUG product, please contact KEPLUG customer service through the retailer's platform or the official KEPLUG websitio. Teña á man o número de modelo do produto e a data de compra cando contacte co servizo de asistencia.
