1. Introdución
The ELEGOO Mars Mate Air Purifier is specifically designed for 3D printing environments, particularly for resin-based 3D printers. It effectively purifies the air by absorbing formaldehyde and reducing odors associated with 3D printing, ensuring a cleaner workspace. This manual provides essential information for the safe and efficient use of your Mars Mate Air Purifier.
Image 1.1: The Mars Mate Air Purifier is compatible with a wide range of 3D printers, including the Saturn 3 Ultra and Mars 4 Ultra.
2. Información de seguridade
Please read all safety instructions before operating the device to prevent injury or damage.
- Do not operate the purifier with a damaged power cord or plug.
- Keep the device away from water or other liquids. Do not immerse the unit.
- Asegúrese de que haxa unha ventilación axeitada arredor da unidade; non bloquee as entradas nin as saídas de aire.
- Non introduza obxectos en ningunha abertura.
- Desconecte o dispositivo antes de limpalo ou realizar calquera mantemento.
- Este aparello non está pensado para o seu uso por persoas (incluídos nenos) con capacidades físicas, sensoriais ou mentais reducidas, ou con falta de experiencia e coñecementos, a menos que teñan supervisión ou instrucións sobre o uso do aparello por unha persoa responsable da súa seguridade.
3. Configuración
- Unpack the Purifier: Carefully remove the Mars Mate Air Purifier from its packaging. Retain packaging for future transport or storage.
- Colocación: Place the purifier on a stable, flat surface near your 3D printer. Ensure there is adequate space around the unit for proper airflow. The purifier is designed to integrate seamlessly into your 3D printing setup.
- Conexión de alimentación: Connect the power adapter to the purifier and then plug it into a suitable power outlet.
- Comprobación do filtro: Ensure the activated carbon filter is correctly installed inside the unit. Refer to the Maintenance section for filter installation details if needed.
Image 3.1: The Mars Mate Air Purifier is designed for integration with 3D printers, such as the ELEGOO Saturn 3.
4. Instrucións de funcionamento
The Mars Mate Air Purifier features a simple control panel for easy operation.
- Encendido/apagado: Preme o On/Off button to turn the purifier on or off. The indicator light will illuminate when the unit is active.
- Selección de modo: Preme o Auto/Speed button to cycle through different operating modes. The purifier may offer an automatic mode that adjusts fan speed based on air quality, and manual speed settings.
- Restablecemento do filtro: Despois de substituír o filtro, prema e manteña premido o botón Filtro button for a few seconds to reset the filter life indicator. This ensures accurate tracking of filter usage.
Image 4.1: Control panel of the Mars Mate Air Purifier, highlighting the filter reset button.
5. Mantemento
Regular maintenance ensures optimal performance and longevity of your Mars Mate Air Purifier.
- Substitución do filtro: The activated carbon filter should be replaced approximately every 2 months, depending on usage and air quality. To replace the filter:
- Unplug the purifier from the power outlet.
- Locate the filter compartment, typically at the base or side of the unit.
- Open the compartment and carefully remove the used filter.
- Insert a new ELEGOO Mars Mate activated carbon filter, ensuring it is seated correctly.
- Close the filter compartment and plug the purifier back in.
- Perform a filter reset as described in the Operating Instructions.
- Limpeza da unidade: Wipe the exterior of the purifier with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the unit is unplugged before cleaning.
Image 5.1: The internal activated carbon filter is crucial for efficient purification.
6 Solución de problemas
If you encounter issues with your Mars Mate Air Purifier, refer to the following common problems and solutions:
| Problema | Causa posible | Solución |
|---|---|---|
| Purifier does not turn on | Sen fonte de alimentación; o cable de alimentación non está conectado correctamente | Comprobe a toma de corrente; asegúrese de que o cable de alimentación estea ben conectado. |
| Poor odor reduction | Filter is old or clogged; Incorrect filter installation | Replace the activated carbon filter; Ensure filter is installed correctly. |
| Ruído inusual durante o funcionamento | Obstrución no ventilador; a unidade non está sobre unha superficie estable | Desenchufe e comprobe se hai obstrucións; Coloque sobre unha superficie estable e plana. |
7. Especificacións
| Característica | Especificación |
|---|---|
| Marca | ELEGOO |
| Número de modelo | US-SO-3D-CP1 |
| Dimensións do produto | 33 x 29 x 48 cm |
| Peso do elemento | 6.35 quilogramos |
| Potencia/Wattage | 6 vatios |
| Nivel de ruído | 35 decibeis |
| Tipo de filtro | Carbón Activado |
| Taxa de purificación | Up to 95% (for formaldehyde and odors) |
| Material | Anti-oxidation ABS |
Image 7.1: Physical dimensions of the Mars Mate Air Purifier.
Image 7.2: The Mars Mate Air Purifier operates with ultra-low power consumption of 6 watts.
8. Garantía e soporte
For warranty information and technical support, please refer to the official ELEGOO website or contact ELEGOO customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.
