Introdución
The iFi GO Pod is a high-performance wearable Digital-to-Analog Converter (DAC) and headphone amplifier designed to enhance the audio quality of your In-Ear Monitors (IEMs). It features advanced Bluetooth capabilities, a fully balanced amplifier, and support for high-resolution audio up to 24bit/96kHz. This manual provides comprehensive instructions for setting up, operating, and maintaining your GO Pod.
O que hai na caixa
- GO Pod (Left & Right units)
- Interchangeable Ear Loops (MMCX & 0.78mm 2-pin connectors)
- Estuche de carga
- Cable USB-C a USB-A
Image: The iFi GO Pod units and their charging case, showing the complete package contents.
Instrucións de configuración
- Charge the GO Pod: Before first use, fully charge the GO Pod units and the charging case. Connect the provided USB-C cable to the charging case and a power source. The case also supports Qi wireless charging.
Image: The iFi GO Pod charging case, highlighting the USB-C charging port.
- Attach IEMs: Select the appropriate ear loops (MMCX or 0.78mm 2-pin) for your In-Ear Monitors. Carefully connect your IEMs to the GO Pod units. Ensure a secure connection.
Image: The iFi GO Pod units with In-Ear Monitors (IEMs) connected, ready for use.
- Encendido: The GO Pod units will typically power on automatically when removed from the charging case. If not, press and hold the touch control area on each unit until the indicator light illuminates.
- Emparejamento: The GO Pod units will enter pairing mode automatically when first powered on or when disconnected from a previously paired device. Open the Bluetooth settings on your source device (e.g., smartphone, tablet) and select "iFi GO Pod" from the list of available devices.
Instrucións de funcionamento
Conectividade Bluetooth
The GO Pod utilizes Qualcomm's QCC5144 Bluetooth 5.2 chipset, supporting various high-definition codecs including LDAC, LHDC/HWA, aptX Adaptive, aptX, AAC, and SBC for optimal audio transmission.
Controis táctiles
Each GO Pod unit features a touch-sensitive area for controlling playback and calls. Specific functions may vary slightly depending on your connected device and application.
- Reproducir/Pausa: Single tap on either unit.
- Próxima pista: Double tap on the right unit.
- Pista anterior: Double tap on the left unit.
- Subir volume: Triple tap on the right unit.
- Baixar volume: Triple tap on the left unit.
- Responder/Finalizar chamada: Single tap on either unit during an incoming call.
- Rexeitar a chamada: Press and hold on either unit during an incoming call.
- Asistente de voz: Press and hold on either unit (when not on a call).
- Lock Touch Controls: Four quick presses on either unit. Repeat to unlock.
Duración da batería
The GO Pod units provide approximately 7 hours of playback on a single charge. The smart charging case extends the total playtime to approximately 35 hours.
Vídeo: Un overview of the iFi GO Pod's features, including its balanced amplifier, high-resolution Bluetooth, battery life, and water resistance.
Mantemento
- Limpeza: Use a soft, dry cloth to clean the GO Pod units and charging case. Avoid using abrasive cleaners or solvents.
- Resistencia á auga: The GO Pod units are IPX5 water and sweat resistant, making them suitable for exercise. However, they are not designed for submersion in water. Ensure the charging contacts are dry before placing them back in the case.
- Almacenamento: When not in use, store the GO Pod units in their charging case to protect them and keep them charged.
Image: The underside of the iFi GO Pod units, showing the charging contacts.
Resolución de problemas
- Sen son/Conexión intermitente:
- Ensure the GO Pod units are fully charged.
- Verify that the GO Pod is correctly paired and connected to your source device.
- Move closer to your source device to reduce potential interference.
- Disconnect and re-pair the GO Pod with your device.
- Check that your IEMs are securely attached to the GO Pod units.
- Unidades sen carga:
- Ensure the USB-C cable is properly connected to the charging case and power source.
- Check that the charging contacts on both the GO Pod units and the case are clean and free of debris.
- If using wireless charging, ensure the case is correctly positioned on a Qi-compatible charger.
- Os controis táctiles non responden:
- Ensure the touch controls are not locked (four quick presses to toggle).
- Clean the touch-sensitive area.
- Restart the GO Pod units by placing them back in the case and then removing them.
Especificacións
| Característica | Detalle |
|---|---|
| Product Dimensions (GO Pod) | 1.71 cm de longo x 0.37 cm de ancho x 0.65 cm de alto |
| Item Weight (GO Pod) | 5.67 gramos (0.2 onzas) |
| Versión Bluetooth | 5.2 (Qualcomm QCC5144 chipset) |
| Códecs Bluetooth compatibles | LDAC, LHDC/HWA, aptX Adaptive, aptX, AAC, SBC |
| Resolución de audio | Ata 24 bits/96 kHz |
| Chip DAC | Cirrus Logic 32-bit DAC chip (MasterHIFI) |
| Ampmáis vivo | Totalmente equilibrado Amp |
| IEM Connectors | MMCX & 0.78mm 2-pin (interchangeable) |
| Battery Life (GO Pod units) | Aprox. 7 horas |
| Tempo de reprodución total (con estuche) | Aprox. 35 horas |
| Cargando | Carga rápida USB-C, carga sen fíos Qi |
| Resistencia á auga | IPX5 (resistente á auga e á suor) |
| Número de modelo | 03-12-004-0002-01 |
| ASIN | B0CBR52VRW |
Garantía e Soporte
For warranty information, technical support, or further assistance, please visit the official iFi Audio websitio ou póñase en contacto co seu departamento de atención ao cliente.
Official iFi Audio Store: iFi Audio on Amazon
