OSRAM Base Classic A FIL 40 LED Bulb E27 Instruction Manual

1. Produto rematadoview

The OSRAM Base Classic A FIL 40 LED Bulb is a modern, energy-efficient lighting solution designed for general illumination in household and interior applications. This LED bulb provides a warm white light (2700 Kelvin) with a brightness of 470 lumens, equivalent to a traditional 40-watt incandescent bulb, while consuming only 4 watts of power. It features an E27 screw base for easy installation and a long operational life of up to 10,000 hours.

As características principais inclúen:

• Pleasant Light: Delivers good light quality and instant 100% light without warm-up time.
• Deseño robusto: Resistant to shocks and vibrations due to advanced LED technology.
• Longa vida útil: Offers an extended operational life of up to 10,000 hours.
• Aforro de enerxía: Very low energy consumption, making it highly efficient.
• Temperatura óptima: Generates lower heat compared to standard incandescent bulbs.

Figure 1: OSRAM Base Classic A FIL 40 LED Bulb, showcasingrazas á súa forma clásica e á súa base E27.

2. Información de seguridade

• Seguridade eléctrica: Always ensure the power supply is switched off before installing, removing, or cleaning the bulb to prevent electric shock.
• Voltage Compatibilidade: This bulb is designed for 220-240 Volts. Ensure your fixture's voltage cumpre este requisito.
• Compatibilidade do atenuador: Este produto é not suitable for use with dimmers. Using it with a dimmer may cause damage to the bulb or the dimmer, and will void the warranty.
• Uso en interiores: Primarily for indoor use. If used outdoors, it must be installed in a suitable, enclosed outdoor fixture to protect it from elements.
• Xeración de calor: While LED bulbs generate less heat than incandescent bulbs, they still produce some heat. Ensure adequate ventilation around the bulb.
• Eliminación: Dispose of used bulbs according to local regulations for electronic waste. Do not dispose of with general household waste.

3. Configuración e instalación

Follow these steps to safely install your OSRAM LED bulb:

1. Apagado: Before beginning, ensure the power supply to the light fixture is completely switched off at the main switch or circuit breaker.
2. Eliminar a lámpada antiga: If replacing an existing bulb, allow it to cool down completely before carefully unscrewing it counter-clockwise from the E27 socket.
3. Inspeccionar o enchufe: Check the E27 socket for any damage or debris. Ensure it is clean and dry.
4. Instalar a nova lámpada: Gently screw the OSRAM LED bulb clockwise into the E27 socket until it is finger-tight. Do not overtighten.
5. Restaurar enerxía: Once the bulb is securely installed, restore power to the light fixture.
6. Proba: Acenda o interruptor da luz para confirmar que a lámpada funciona correctamente.

Figure 2: Close-up of the OSRAM LED bulb, highlighting the E27 screw base for installation.

4. Funcionamento

Operating the OSRAM Base Classic A FIL 40 LED Bulb is straightforward:

• Activar/Desactivar: Usa o interruptor de parede estándar conectado á túa lámpada para acender ou apagar a lámpada.
• Luz instantánea: The LED bulb provides instant 100% light output immediately upon switching on, with no warm-up time required.
• Non regulable: As noted in the safety section, this bulb is not dimmable. It will operate at full brightness when switched on.

5. Mantemento

The OSRAM LED bulb requires minimal maintenance:

• Limpeza: Asegúrate de que a alimentación estea apagada e que a lámpada estea fría antes de limpala. Limpe a lámpada suavemente cun pano suave e seco. Non empregues produtos de limpeza líquidos nin materiais abrasivos.
• Substitución: Due to its long lifespan, frequent replacement is not expected. When replacement is necessary, follow the installation steps in Section 3.
• Non hai pezas reparables polo usuario: A lámpada non contén pezas que o usuario poida reparar. Non intente abrir nin reparar a lámpada.

6 Solución de problemas

If you encounter issues with your OSRAM LED bulb, refer to the following common troubleshooting steps:

• A lámpada non se acende:
  • Asegúrate de que a subministración eléctrica do aparello estea activada.
  • Check that the bulb is screwed in securely into the E27 socket.
  • Test the bulb in another working fixture to rule out a faulty fixture.
  • If the bulb still does not light up, it may be faulty and require replacement.
• Parpadeo ou atenuación:
  • Confirm that the bulb is not connected to a dimmer switch, as this bulb is not dimmable.
  • Comprobe se hai conexións soltas na instalación ou no cableado.
  • Asegurar o voltage supply is stable and within the bulb's specified range (220-240V).
• Ruído inusual:
  • LED bulbs are generally silent. If you hear buzzing, ensure the bulb is not on a dimmer circuit.
  • Comprobe se hai conexións soltas na instalación.

7. Especificacións

Figure 3: Technical drawing illustrating the dimensions of the OSRAM LED bulb. The 'd' indicates diameter and the vertical line indicates height.

Figure 4: EU Energy Label for the LEDVANCE AC32396 (OSRAM) LED bulb, indicating an energy efficiency class of E and consumption of 4 kWh/1000h. For more details, visit the official EPREL database: Ligazón á base de datos EPREL.

8. Garantía e soporte

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official OSRAM websitio. Garda o comprobante de compra para reclamacións de garantía.