ELEGRP 15 Amp Auto Reset Inline GFCI Extension Cord Instruction Manual

1. Introdución

This manual provides essential information for the safe and effective use of your ELEGRP 15 Amp Auto Reset Inline GFCI Extension Cord. This heavy-duty, 3-foot, 12/3 SJTW cable features a grounded plug with a single electrical power outlet and an LED indicator. It is designed for both indoor and outdoor applications, offering enhanced electrical safety through its Ground Fault Circuit Interrupter (GFCI) functionality.

ELEGRP 15 Amp Auto Reset Inline GFCI Extension Cord, 3ft, 12/3 SJTW, with 1 outlet and LED light.

This image displays the ELEGRP 15 Amp Auto Reset Inline GFCI Extension Cord, highlighting its 3-foot length, 12-gauge 3-wire SJTW construction, 15 Amp, 125 Volt, 1875 Watt rating, and suitability for both indoor and outdoor use. It also shows the transparent plug with LED light.

2. Información importante de seguridade

Always read and follow all safety instructions before using this product. Failure to do so may result in electric shock, fire, or serious injury.

Listado UL: This product is UL Listed, indicating it meets stringent safety standards.
Protección GFCI: The integrated Ground Fault Circuit Interrupter (GFCI) provides protection against electrical shock by detecting ground faults and quickly shutting off power.
Surge and Lightning Protection: The in-line GFCI features surge and lightning protection, capable of withstanding 6 kilovolts.
Resistente á auga: The automatic reset GFCI has a UL50E 3R water-resistant rating, suitable for outdoor use.
Proba antes de cada uso: Always test the GFCI before each use to ensure it is functioning correctly. Refer to the 'Operating Instructions' section for testing procedures.
Conexión a terra adecuada: Ensure the power source receptacle is properly grounded. Do not use if the receptacle is ungrounded.
Evitar a sobrecarga: Non exceda a clasificación eléctrica de 15 Amps, 125 Volts, or 1875 Watts.
Inspeccionar regularmente: Periodically inspect the cord for any damage, cuts, or frayed insulation. Discontinue use if damaged.

ELEGRP GFCI protection module with test and reset buttons, LED indicator, UL50E 3R water resistance, 6000+ factory tests, and 6 kilovolt surge protection.

This image details the GFCI protection module, showing the test and reset buttons, an LED indicator, and key safety features including UL50E 3R water resistance, over 6000 factory tests, and 6 kilovolt surge and lightning protection.

3. Características do produto

Auto Reset GFCI: Automatically resets when power is restored after a trip.
Indicador LED: Provides visual confirmation of power status and GFCI functionality.
Construción resistente: Features 12-gauge (12/3) SJTW soft drawn copper cabling for durability and strength. SJTW signifies Service Junior Thermoplastic Weather-resistant.
High Conductivity: Constructed with 100% stranded soft-drawn copper conductors for efficient power transmission.
Aplicación versátil: Suitable for a wide range of indoor and outdoor uses, including power tools, outdoor lighting, and appliances.

Close-up of 100% stranded soft-drawn copper conductors for high conductivity.

Un primeiro plano view of the 100% stranded soft-drawn copper conductors, emphasizing the high conductivity of the cable.

NEMA 5-15R single outlet with 15 Amp rating on the ELEGRP GFCI extension cord.

This image shows the NEMA 5-15R single outlet of the extension cord, rated for 15 Amps.

Examples of ELEGRP GFCI extension cord applications including pressure washing, hot tub power, indoor fan, and Christmas lights.

This image illustrates various applications for the GFCI extension cord, such as powering a pressure washer, a hot tub, an indoor fan, and outdoor Christmas lights, demonstrating its versatility for both indoor and outdoor use.

4. Configuración

Inspeccione o cable: Before plugging in, visually inspect the entire extension cord, including the plug, GFCI module, and outlet, for any signs of damage. Do not use if any damage is observed.
Conectar ao receptáculo: Insert the male plug of the GFCI extension cord into a standard 120V AC, 3-prong grounded electrical outlet.
Verificar potencia: The LED indicator on the GFCI module should illuminate, indicating that power is present and the GFCI is ready for use.
Realizar a proba GFCI: Before connecting any device, press the 'TEST' button on the GFCI module. The LED indicator should turn off, and the 'RESET' button should pop out, indicating the GFCI has tripped.
Restablecer GFCI: Press the 'RESET' button to restore power. The LED indicator should turn back on. If the GFCI does not trip or reset as described, do not use the cord and contact customer support.
Conectar dispositivo: Once the GFCI is confirmed to be working, plug your device into the GFCI outlet.

5. Instrucións de funcionamento

The ELEGRP GFCI extension cord is designed for simple operation with its automatic reset feature. However, regular testing is crucial for safety.

Funcionamento normal: When plugged in and reset, the LED indicator will be lit, signifying that power is flowing through the GFCI and it is providing ground fault protection.
Viaxe GFCI: If a ground fault is detected, the GFCI will automatically trip, cutting off power to the connected device. The LED indicator will turn off, and the 'RESET' button will pop out.
Restablecemento automático: This GFCI features an auto-reset function. When power is restored after an interruption (e.g., power outage), the GFCI will automatically reset itself to the 'ON' position, and the LED indicator will light up.
Manual Reset (after a trip): If the GFCI trips due to a ground fault, disconnect the device, press the 'RESET' button to restore power, and then reconnect the device. If it trips again, there may be an issue with the device or the circuit.
Testing the GFCI:
1. Plug the GFCI extension cord into a live receptacle. The LED indicator should be ON.
2. Press the 'TEST' button. The LED indicator should turn OFF, and the 'RESET' button should pop out.
3. Press the 'RESET' button. The LED indicator should turn ON.
4. If the GFCI fails any part of this test, do not use it.

6. Mantemento

Proper maintenance ensures the longevity and safe operation of your GFCI extension cord.

Inspección periódica: Routinely check the cord for any signs of wear, cuts, abrasions, or damage to the insulation, plug, or GFCI module.
Limpeza: Disconnect the cord from power before cleaning. Wipe the cord and GFCI module with a damp pano. Non mergullo en auga nin use produtos químicos agresivos.
Almacenamento: When not in use, store the extension cord in a dry, cool place, away from direct sunlight and extreme temperatures. Coil the cord loosely to prevent kinks and damage.
Evite obxectos cortantes: Keep the cord away from sharp edges, hot surfaces, and moving machinery.

7 Solución de problemas

If you encounter issues with your GFCI extension cord, refer to the following common problems and solutions:

Problema	Causa posible	Solución
GFCI trips immediately after pressing RESET or plugging in.	Ground fault in the connected device or the circuit.	Disconnect the device. Press RESET. If it holds, the device is faulty. If it still trips, the circuit may have a fault. Consult a qualified electrician.
No power, LED indicator is off, and RESET button is not popped out.	No power from the wall receptacle or internal damage to the cord.	Check the wall receptacle with another device. If the receptacle has power, the extension cord may be damaged. Discontinue use.
GFCI does not trip when TEST button is pressed.	Mal funcionamento do GFCI.	Do not use the cord. Contact customer support for assistance.
LED indicator is off, but power is present (e.g., device works).	LED indicator malfunction.	While the GFCI may still be functional, a non-working indicator can be misleading. Contact customer support.

8. Especificacións

Característica	Especificación
Valoración eléctrica	15 A, 125 V
Maximum Total Output Power	1875 W
Lonxitude do cordón	3 pés
Temperatura de funcionamento	-31 °F a 150 °F (-35 °C a 66 °C)
Tipo de restablecemento	Restablecemento automático
Certificación	Listado UL e CUL
Medidor de arame	12/3 SJTW
Grao impermeable	UL50E 3R
Número de modelo	G20CA

Detailed product specification diagram for the ELEGRP GFCI extension cord, including dimensions and electrical ratings.

A technical diagram providing detailed product specifications, including dimensions, electrical rating (15A, 125V, 1875W), cord length (3 feet), operating temperature, reset type (Auto Reset), certification (UL & CUL Listed), wire gauge (12/3 SJTW), and waterproof grade (UL50E 3R).

9. Garantía e soporte

ELEGRP is committed to providing high-quality products and customer satisfaction. This product comes with 3 Years Full Tech Support.

For technical assistance, troubleshooting, or warranty inquiries, please contact ELEGRP Customer Support:

Teléfono: 833-267-3272
Horario: 9:00 AM - 7:00 PM EST, 10 Hours a Day / 365 Days a Year

	Guía de instalación do receptáculo combinado ELEGRP e do cargador USB Instrucións de instalación detalladas e especificacións para o receptáculo combinado ELEGRP e o cargador USB, incluíndo características, diagramas de cableado, compatibilidade e avisos de seguridade.
	Guía de instalación do cargador e receptáculo combinado USB ELEGRP R16 Instrucións de instalación, especificacións e avisos de seguridade para o receptáculo e cargador combinado USB ELEGRP R16. Inclúe dous portos USB, toma de corrente estándar e cableado sinxelo. Inclúe garantía e cumprimento da normativa FCC.
	Resolución de problemas do enchufe intelixente ELEGRP: resolver fallos de conexión da aplicación Guía completa para a resolución de problemas e a resolución de fallos de conexión da aplicación para enchufes intelixentes ELEGRP. Aprende a comprobar a frecuencia wifi, o modo de emparellamento, os modos de conexión, a configuración do teléfono e a intensidade do sinal.
	Guía de instalación do interruptor de luz intelixente con regulador de intensidade ELEGRP Este documento ofrece instrucións de instalación para o interruptor de luz intelixente con regulador de intensidade ELEGRP, que abarcan configuracións unipolares e de 3 vías. Detalla o cableado, a configuración e a compatibilidade con asistentes domésticos intelixentes como Alexa e o Asistente de Google.
	Manual do usuario do enchufe intelixente ELEGRP Matter Manual do usuario para o enchufe intelixente ELEGRP Matter (modelo MP10), que abrangue a introdución do produto, as especificacións, as opcións de configuración coa aplicación ELEGRP HOME ou aplicacións de terceiros compatibles con Matter, a resolución de problemas comúns, as instrucións de seguridade importantes, as declaracións de conformidade coa FCC e ISED Canada e a garantía limitada dun ano.
	Manual do usuario do dispositivo doméstico intelixente ELEGRP: Conexión de aplicacións e dispositivos Manual de usuario completo para dispositivos domésticos intelixentes ELEGRP, que detalla como descargar a aplicación ELEGRP HOME, conectar dispositivos a través de Wi-Fi (só 2.4 GHz) e integrar con Amazon Alexa e Google Assistant.

ELEGRP G20CA