1. Introdución
The Hyperice Hypervolt Go 2 is a portable percussion massage device designed to help relieve sore muscles and stiffness. Featuring QuietGlide Technology, this lightweight and compact device offers effective muscle recovery and relaxation on the go. This manual provides essential information for the safe and efficient use of your Hypervolt Go 2.
Figure 1: Hyperice Hypervolt Go 2 device with included attachments.
2. Que está incluído
Your Hypervolt Go 2 package contains the following items:
- Hypervolt Go 2 Device
- Charging Cable (5V USB-A to USB-C)
- Two (2) Interchangeable Head Attachments
Figure 2: All components included with the Hypervolt Go 2.
3. Configuración
3.1 Carga do dispositivo
Before first use, fully charge your Hypervolt Go 2. Connect the provided 5V USB-A to USB-C charging cable to the device's charging port and a compatible power source. The LED light band at the base of the handle will illuminate to indicate charging status. A full charge provides approximately 3 hours of battery life.
Nota: The Hypervolt Go 2 will not operate while connected to the charging cable.
3.2 Conexión/desconexión dos accesorios da cabeza
To attach a head, gently push the desired attachment into the opening at the front of the device. To detach, pull the attachment straight out. Ensure the attachment is securely seated before use.
Figure 3: The two interchangeable head attachments.
Video 1: Unboxing and initial setup of the Hypervolt Go 2, demonstrating how to attach and detach the massage heads.
4. Instrucións de funcionamento
4.1 Acendido/Apagado
To power on the device, press and hold the power button located at the bottom of the handle for approximately 2 seconds. Release the button once the LED lights illuminate. To power off, press and hold the power button again until the device shuts down.
4.2 Axustar a configuración de velocidade
The Hypervolt Go 2 features 3 speed settings. Once powered on, press the power button briefly to cycle through the speeds:
- Press once for Speed 1 (lowest)
- Press twice for Speed 2 (medium)
- Press three times for Speed 3 (highest)
The indicator lights around the power button will show the current speed setting.
4.3 Aplicación
Apply the massage head to the desired muscle area. Move the device slowly over the muscle, applying light to moderate pressure. Avoid using the device on bony areas, the head, or directly on joints. Use for a maximum of 1-2 minutes per muscle group.
Figure 4: Proper application of the Hypervolt Go 2 on the arm.
Video 2: Demonstration of the Hypervolt Go 2 in use, showcasing its portability and effectiveness on various muscle groups.
5. Head Attachments
The Hypervolt Go 2 comes with two interchangeable head attachments, allowing for varied massage experiences:
- Cabeza plana: Ideal para grupos musculares máis grandes e para uso xeral.
- Cabeza de bala: Designed for more precise targeting of knots and smaller muscle areas.
Figure 5: Using the Hypervolt Go 2 with a flat head attachment on the leg.
6. Mantemento
Para garantir a lonxevidade e o rendemento óptimo do teu Hypervolt Go 2, segue estas pautas de mantemento:
- Limpeza: Limpa o dispositivo cun anuncioamp pano despois de cada uso. Non mergullo o dispositivo en auga.
- Almacenamento: Garde o dispositivo nun lugar fresco e seco, lonxe da luz solar directa e de temperaturas extremas.
- Cargando: Cargue o dispositivo regularmente, mesmo se non o usa con frecuencia, para manter a batería en bo estado.
7 Solución de problemas
If you encounter any issues with your Hypervolt Go 2, consider the following:
- O dispositivo non se acende: Ensure the device is fully charged. The device will not operate while plugged in.
- Percusión débil: Check the battery level. If low, charge the device. Ensure the head attachment is securely in place.
- Ruído inusual: Discontinue use and contact customer support if the noise persists or is accompanied by other malfunctions.
For further assistance, refer to the official Hyperice support resources.
8. Especificacións
| Característica | Detalle |
|---|---|
| Dimensións do produto | 2.87 x 1.97 x 2.63 polgadas |
| Número de modelo do artigo | Hypervolt Go 2 |
| Peso do elemento | 1.5 libras (680 gramos) |
| Baterías | 1 pilas de iones de litio necesarias (incluídas) |
| Fonte de enerxía | Alimentado por batería |
| Material | Policarbonato |
| Fabricante | Hyperice |
| Velocidades | 3 |
| Motor | Motor sen escobillas de alto par de 40 W |
| Duración da batería | 3 horas |
| Amigable para viaxes | Equipaxe de man aprobada pola TSA |
9. Información de seguridade
Always follow the instructions provided to operate the device safely. Do not use this massager for conditions not listed in the 'Use for' attribute (Whole Body). Consult a health professional before use if you have any medical conditions or concerns. Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
10. Garantía e soporte
For warranty information, product support, or to purchase additional accessories, please visit the official Hyperice website or contact their customer service. Each item has a unique code that Hyperice verifies before shipping.
Visita o Tenda Hyperice para máis produtos e información.
