Produto rematadoview
The Lockwood 005/B2LSCDP Paradigm Square Rose Universal Satin Chrome Double Cylinder Deadbolt is designed to provide enhanced security and convenience for both residential and architectural applications. This deadbolt features a high-security cut-resistant stainless steel bolt and a slimline design. It incorporates innovative features such as safety release, LockAlert, and DualSelect for improved functionality and user awareness.
Image: The Lockwood 005/B2LSCDP Paradigm Double Cylinder Deadbolt, showing its square rose design and the key cylinder on the exterior side. The internal mechanism with the bolt is also visible.
Configuración e instalación
Proper installation is crucial for the optimal performance and security of your Lockwood deadbolt. It is recommended that installation be performed by a qualified professional.
Ferramentas necesarias:
- Destornillador de cabeza Phillips
- Cinta métrica
- Lapis
- Drill with appropriate bits (if pre-drilled holes are not present)
- Chisel (for mortising, if required)
Pasos de instalación:
- Prepara a porta: Ensure the door is properly prepared with the correct bore holes and backset. Refer to the template provided with the product packaging for precise measurements.
- Instalar o ferrollo de retención: Insert the latch bolt into the edge of the door, ensuring the bevel faces the door frame. Secure it with the provided screws.
- Install the Exterior Cylinder: Place the exterior cylinder assembly through the bore hole from the outside of the door.
- Instalación do conxunto interior: Align the interior assembly with the exterior cylinder and secure it using the through-bolts. Ensure the deadbolt operates smoothly before fully tightening.
- Instalar a placa de peche: Mark and chisel out the recess for the strike plate on the door frame. Secure the strike plate with the provided screws, ensuring the bolt extends fully into the strike when locked.
- Proba de funcionamento: Test the deadbolt with the key from both the interior and exterior sides to ensure smooth locking and unlocking.
For detailed diagrams and specific measurements, please consult the full installation guide included in the product packaging.
Instrucións de funcionamento
The Lockwood Paradigm deadbolt offers secure and convenient operation.
Locking the Deadbolt:
- Desde o exterior: Insert the key into the cylinder and rotate it to extend the deadbolt. Remove the key.
- Desde o interior: Insert the key into the cylinder and rotate it to extend the deadbolt. Remove the key.
Unlocking the Deadbolt:
- Desde o exterior: Insert the key into the cylinder and rotate it to retract the deadbolt. Remove the key.
- Desde o interior: Insert the key into the cylinder and rotate it to retract the deadbolt. Remove the key.
Características especiais:
- LockAlert: This feature provides a visual indication of the deadbolt's status (locked/unlocked). Refer to the product's specific LockAlert indicator for details.
- DualSelect: Allows for different locking modes. Consult your product's specific instructions for how to engage and disengage DualSelect modes.
- Safety Release: Designed for emergency egress, this feature allows for quick unlocking from the inside.
Mantemento
Regular maintenance ensures the longevity and smooth operation of your deadbolt.
- Limpeza: Clean the exterior finish with a soft, damp pano. Evite produtos de limpeza abrasivos ou produtos químicos agresivos, xa que poden danar o acabado.
- Lubricación: Periodically apply a small amount of graphite-based lubricant or a silicone-based spray specifically designed for locks into the keyway. Do not use oil-based lubricants as they can attract dirt and debris.
- Parafusos de verificación: Occasionally check and tighten any loose mounting screws to ensure the deadbolt remains securely fastened to the door.
Resolución de problemas
If you encounter issues with your deadbolt, refer to the following common troubleshooting steps:
| Problema | Causa posible | Solución |
|---|---|---|
| A chave é difícil de inserir ou xirar. | Dirt/debris in keyway, worn key, or misaligned cylinder. | Clean keyway with compressed air, lubricate with graphite, try a new key, or check cylinder alignment. |
| O cerrojo non se estende nin se retrae completamente. | Misaligned strike plate, loose screws, or internal mechanism issue. | Adjust strike plate, tighten mounting screws, or contact customer support if mechanism is faulty. |
| Deadbolt rattles or feels loose. | Parafusos de montaxe soltos ou compoñentes desgastados. | Tighten all visible screws. If issue persists, professional inspection may be needed. |
If these steps do not resolve the issue, please contact Lockwood customer support.
Especificacións
| Atributo | Detalle |
|---|---|
| Número de modelo | 005/B2LSCDP |
| Marca | LOCKWOOD |
| Fabricante | Assa Abloy |
| Dimensións do produto | 17 x 8.5 x 6.5 cm |
| Peso do elemento | 1 kg |
| Cor | Prata |
| Estilo | Moderno |
| Remate | Pulido |
| Material | Aceiro inoxidable |
| Forma | Praza |
| Características especiais | Resistente ao corte |
| Tipo de bloqueo | Cerrojo de doble cilindro |
Información da garantía
Lockwood products are manufactured to the highest standards and are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Lockwood websitio. Garda o comprobante de compra para reclamacións de garantía.
Atención ao cliente
For further assistance, technical support, or to inquire about replacement parts, please contact Lockwood customer service. Contact details can typically be found on the product packaging or the official Lockwood websitio.
Recursos en liña: Visit the official Lockwood website for FAQs, additional product documentation, and support contact information.
