Ledlenser HF4R Signature

Ledlenser HF4R Signature Rechargeable LED Headlamp Manual de usuario

Model: HF4R Signature (LL502795)

Marca: Ledlenser

1. Introdución

Thank you for choosing the Ledlenser HF4R Signature Headlamp. This ultra-slim, lightweight, and versatile headlamp is designed for outdoor enthusiasts, sports activities, and demanding DIY tasks. It features up to 600 lumens of brightness, a separate spot and floodlight, RGB front light, IP68 waterproof rating, and a convenient magnetic charging system.

Cabezal Ledlenser HF4R Signatureamp

The Ledlenser HF4R Signature headlamp, mostrarasinpolo seu deseño compacto e a diadema integrada.

2. Instrucións de seguridade

  • Seguridade ocular: Do not look directly into the light beam or shine it into the eyes of others. High-intensity light can cause temporary vision impairment.
  • Seguridade da batería: O xefeamp contains an integrated rechargeable Lithium-ion battery. Do not attempt to replace it yourself. Do not expose the battery to extreme temperatures, fire, or water.
  • Exposición á auga: Mentres o headlamp is IP68 rated for continuous immersion in water, ensure the magnetic charging port is clean and dry before charging to prevent damage.
  • Nenos: Manter fóra do alcance dos nenos.

3. Contido do paquete

Verifica que todos os elementos estean presentes no teu paquete:

  • Cabezal Ledlenser HF4R Signatureamp
  • Cable de carga USB-C
  • Integrated Rechargeable Battery (pre-installed)

4. Configuración

4.1. Cargando a batería

The HF4R Signature headlamp features a magnetic charging system for convenience. Before first use, fully charge the battery.

  1. Connect the magnetic end of the supplied USB-C charging cable to the charging port on the headlamp. The magnetic connector will snap into place.
  2. Connect the USB-C end of the cable to a suitable USB power source (e.g., wall adapter, computer USB port).
  3. The integrated battery status indicator lights will show the charging progress. Once all lights are solid, the battery is fully charged.
  4. Desconecte o cable de carga unha vez que a carga estea completa.
Cabezal Ledlenser HF4R Signatureamp con cable de carga magnético

The Ledlenser HF4R Signature headlamp connected to its magnetic charging cable, illustrating the charging port and battery status indicator lights.

4.2. Axustar a diadema

O xefeamp comes with an individually adjustable, slim headband for a comfortable and secure fit.

  1. Coloque o cabezalamp na túa cabeza.
  2. Use the adjustable buckles on the headband to tighten or loosen it until it fits snugly without being too tight.
  3. O xefeamp unit can be tilted up or down to direct the light beam as needed.
Detail of Ledlenser HF4R Signature Headband adjustment

Detail of the adjustable headband mechanism on the Ledlenser HF4R Signature headlamp, showing how to achieve a secure and comfortable fit.

5. Instrucións de funcionamento

The HF4R Signature headlamp features intuitive controls for various lighting modes.

5.1. Power On/Off and Brightness Levels

O xefeamp has a single button for operation.

  • Para activar: Prema o botón de acendido unha vez. A cabeceiraamp will turn on in its last used white light mode.
  • Para cambiar o brillo por ciclo: Mentres o headlamp is on, press the power button repeatedly to cycle through the three white light brightness levels (e.g., Low > Medium > High).
  • Para desactivar: Manteña premido o botón de acendido durante aproximadamente 2 segundos.
Fronte view of Ledlenser HF4R Signature Headlamp with light description

Fronte view of the Ledlenser HF4R Signature headlamp, highlighting its dual light sources for both spot and flood illumination, and indicating the RGB light capability.

5.2. RGB Light Function

The HF4R Signature includes red, green, and blue front lights for specialized applications.

  • To Activate RGB: From the OFF state, press and hold the power button for approximately 3 seconds until the RGB light activates.
  • To Cycle RGB Colors: While the RGB light is on, press the power button repeatedly to cycle through Red > Green > Blue.
  • To Return to White Light: Press and hold the power button again for approximately 3 seconds, or turn the headlamp off and on normally.

5.3. Spot and Floodlight

O xefeamp features separate light sources for a focused spot beam and a wide flood beam, providing optimal illumination for both close-range and long-distance viewing. These modes are typically integrated into the brightness cycling sequence or can be activated by specific button presses depending on the exact firmware version. Refer to the quick start guide included with your product for precise activation sequences.

6. Mantemento

6.1. Limpeza

  • Limpe a cabezaamp corpo suave, damp pano.
  • Do not use abrasive cleaners or harsh chemicals, as these can damage the finish or seals.
  • Clean the magnetic charging contacts periodically to ensure proper connection.

6.2. Coidado da batería

  • Charge the battery regularly, even if the headlamp is not in frequent use, to maintain battery health.
  • Evita descargar completamente a batería, xa que isto pode reducir a súa vida útil.
  • Para o almacenamento a longo prazo, carga a batería ata aproximadamente o 50-70 % da súa capacidade.

6.3. Almacenamento

  • Garda o cabezalamp nun lugar fresco e seco, lonxe da luz solar directa e de temperaturas extremas.
  • Asegúrese da cabeceiraamp is turned off to prevent accidental activation and battery drain.

7 Solución de problemas

  • Xefeamp non se acende: Asegúrate de que a batería estea cargada. Conéctaa ao cargador e comproba o indicador da batería.
  • A luz é tenue ou parpadea: The battery level is likely low. Recharge the headlamp plenamente.
  • A carga non funciona: Check that the magnetic cable is properly connected and the USB power source is active. Clean the magnetic contacts on both the cable and the headlamp.
  • Water ingress (unlikely with IP68): If water somehow enters the device, immediately turn it off and allow it to dry completely before attempting to use or charge it again. Contact customer support if issues persist.

8. Especificacións

CaracterísticaEspecificación
MarcaLedlenser
ModeloHF4R Signature (LL502795)
Dimensións (L x W x H)4.2 x 4.2 x 4.2 cm
Peso72 gramos
Tipo de batería1 batería de ións de litio (integrada)
Luminous Flux (Max)600 lúmenes
Poder4 vatios-hora
Clasificación IPIP68 (Dustproof, protected against continuous immersion in water)
MaterialAluminio anodizado
Características especiaisPortable, Lightweight, Rechargeable, RGB Light, Adjustable, Multiple Light Types
Compoñentes incluídosUSB-C charging cable, integrated rechargeable battery

9. Garantía e soporte

Your Ledlenser HF4R Signature Headlamp is covered by a manufacturer's warranty. For detailed warranty information, product registration, or technical support, please visit the official Ledlenser websitio web ou póñase en contacto directamente co servizo de atención ao cliente. Garde o comprobante de compra para reclamacións de garantía.

10. Protección e eliminación do medio ambiente

Do not dispose of the device or its battery with household waste. This product contains an integrated rechargeable Lithium-ion battery that must be recycled responsibly. Please follow local regulations for the separate collection of electronic products and batteries. Proper disposal helps prevent potential negative consequences for the environment and human health.

Documentos relacionados - Sinatura HF4R

Preview Cabezal LEDLENSER HF4Ramp Guía do usuario e características
Guía completa do cabezal LEDLENSER HF4Ramp serie, incluíndo os modelos HF4R Core, HF4R Work e HF4R Signature. Obtén información sobre a carga, os indicadores da batería, o bloqueo de transporte, o mecanismo de inclinación e os distintos modos de iluminación.
Preview Cabezal LED recargable Ledlenser serie HF4Ramp Guía de inicio rápido
Guía de inicio rápido para os cabezales LED recargables Ledlenser HF4R Core, HF4R Work e HF4R Signatureamps. Obtén información sobre as características, a carga, o estado da batería, o modo de aumento de potencia, o bloqueo de transporte e as instrucións de funcionamento dos modos de iluminación branco, vermello e RGB.
Preview Cabezal recargable Ledlenser MH5ampDatos técnicos, características e especificacións
Ficha técnica completa do produto para o cabezal recargable Ledlenser MH5amp, detallando as súas especificacións técnicas, o rendemento da luz, as opcións de alimentación, a información sobre o envase e a garantía. As características inclúen óptica de enfoque avanzada, clasificación IP54 e modos de uso versátiles.
Preview Núcleo e cabezal LEDLENSER H19R Signatureamp Manual e guía do usuario
Manual de usuario para os cabezales recargables LEDLENSER H19R Core e H19R Signatureamps. Abarca o funcionamento, a substitución da batería, os modos, os accesorios, o control remoto e a carga.
Preview Cabezal Ledlenser HF6Ramp Guía de usuario
Guía completa para o funcionamento dos headlights Ledlenser HF6R Core, HF6R Work e HF6R Signatureamps, que abarcan a carga, os indicadores da batería, os modos de luz e o uso de accesorios.
Preview Cabezal Ledlenser serie H7Ramp Guía do usuario e características
Guía completa dos faros Ledlenser H7R Core, H7R Work e H7R Signatureamps, que detallan a substitución da batería, os modos de funcionamento, a conectividade das aplicacións, a carga magnética, as funcións avanzadas como o axuste do aumento e o enfoque e as opcións de montaxe de accesorios para diversas actividades.