Manual do usuario do asento de inodoro con bidé alongado XCQQ S8L

1. Introdución

Thank you for choosing the XCQQ S8L-Elongated Bidet Toilet Seat. This manual provides essential information for the safe installation, operation, and maintenance of your new bidet toilet seat. Please read these instructions thoroughly before installation and retain them for future reference.

Image 1.1: The XCQQ S8L-Elongated Bidet Toilet Seat, featuring a side control panel and a self-cleaning nozzle.

2. Información importante de seguridade

Please read all safety warnings and instructions carefully to reduce the risk of fire, electric shock, or injury.

• Requisitos eléctricos: This unit operates on 120 Volts and requires a 1300-watt power supply. Ensure the electrical outlet is a B-type US style with a ground plug and is GFCI (Ground Fault Circuit Interrupter) protected. Do not use extension cords.
• Subministro de auga: Connect the bidet seat only to a potable cold water supply. Ensure all connections are secure to prevent leaks.
• Límite de peso: The maximum weight capacity for this bidet toilet seat is 280 pounds. Exceeding this limit may cause damage or injury.
• Lid Caution: The toilet seat lid is designed for soft closing and is not intended to support body weight. Avoid sitting or standing on the lid to prevent damage.
• Limpeza: Always unplug the unit before cleaning. Use only mild, non-abrasive cleaners.
• Children and Individuals with Reduced Capabilities: Este aparello pode ser usado por nenos a partir de 8 anos e persoas con capacidades físicas, sensoriais ou mentais reducidas ou con falta de experiencia e coñecementos, sempre que teñan supervisión ou instrucións sobre o uso do aparello de forma segura e comprendan os perigos implicados. . Os nenos non deben xogar co aparello. A limpeza e o mantemento do usuario non deben ser feitos por nenos sen supervisión.

3. Contido do paquete

Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:

• XCQQ Bidet Toilet Seat
• 3-way Valve + DMT Pipe (Pre-Installed)
• Placa de fixación
• Mounting Hardware (screws, rubber expansion nuts)
• Manual de instrucións (este documento)

4. Características do produto

The XCQQ S8L-Elongated Bidet Toilet Seat offers a range of features designed for enhanced hygiene and comfort:

• Warm Water Wash: Adjustable water temperature with 5 settings, ranging from room temperature to 102°F (39°C).
• Asento Calefacción: Provides warmth with 4 adjustable temperature levels, from room temperature up to 102°F (39°C).
• Secador de aire quente: Features an efficient air drying system with 5 adjustable temperature settings to reduce toilet paper usage.
• Tapa de peche suave: Evita os golpes e reduce o ruído.
• Luz nocturna: Integrated LED night light for visibility in low-light conditions, with a beep-off mode to avoid disturbance.
• Boquilla autolimpante: A stainless steel nozzle that performs self-cleaning before and after each use.
• Pantalla LED: Real-time display of water temperature, seat temperature, and drying temperature.
• Memory Customized Settings: The unit retains your preferred settings for water pressure, water temperature, drying temperature, nozzle position, and heated toilet seat temperature level (settings may need to be re-memorized after a power outage).
• Multiple Cleaning Styles: Includes Female Cleaning, Rear Cleaning, Oscillating Cleaning, and Self-Cleaning functions.

Image 4.1: Illustration of the heated toilet seat and warm air drying functions.

Image 4.2: Depiction of the soft-close lid mechanism and the integrated LED night light.

Image 4.3: Visual representation of the various cleaning modes, including female, rear, oscillating, and self-cleaning.

5. Guía de instalación

Before installation, ensure your toilet is an elongated shape and has an accessible electrical outlet. Refer to Image 5.1 to confirm your toilet size.

Image 5.1: Toilet size confirmation diagram for elongated and round models, highlighting the requirement for an electrical outlet.

Comprobación previa á instalación:

• Turn off the water supply to your toilet.
• Flush the toilet to drain the tank.
• Remove your existing toilet seat and lid.

Instalación paso a paso:

1. Remove Fixing Plate: Hold down the buckle on the right side of the bidet unit and pull the fixing plate out from the bottom of the unit.
   

   Image 5.2: Removing the fixing plate from the bidet seat.
2. Secure Fixing Plate: Insert the rubber expansion nuts into the toilet holes. Use the metal adjustment sheets and screws to secure the fixing plate onto the toilet bowl.
   

   Image 5.3: Securing the fixing plate to the toilet bowl.

3. Conectar a unidade de bidé: Push the bidet unit into the secured fixing plate while holding down the buckle until the plate slides completely into the bottom of the unit.
   

   Image 5.4: Attaching the bidet unit to the fixing plate.

4. Conectar o abastecemento de auga: Insert the black rubber ring (optional) into the 3-way valve and screw it onto the inlet of the toilet tank. Connect the bidet's water hose to the 3-way valve.
   

   Image 5.5: Connecting the bidet to the toilet's water supply.
5. Restaurar a auga e a electricidade: Open the main water supply valve. Wait 3-5 minutes for the bidet to fill with water. Then, plug the unit into a GFCI-protected electrical outlet.

Initial Power-On and Water Spray Check:

When the power is activated, the LED light will start to blink. The spray bar will automatically extend (without spraying water) and water will flow down the bar into the toilet. This is a system self-check. The blue light will stop blinking in approximately 1 minute automatically.

If the LED light blinks continuously for more than 5 minutes:

1. Unplug the bidet.
2. Peche a chave de auga.
3. Agarde 3-5 minutos.
4. Plug it back in and do not operate any functions. The blue light should stop blinking in 1 minute.

Image 5.6: Important attention notice for initial power-on and LED light behavior.

6. Funcionamento

The XCQQ S8L-Elongated Bidet Toilet Seat is controlled via a side panel. Familiarize yourself with the buttons and their functions:

Imaxe 6.1: Detallada view of the side control panel, indicating various function buttons.

Funcións do panel de control:

• Potencia: Acende / apaga a unidade.
• Parar: Stops any active washing or drying function.
• Spray: Initiates a general wash.
• Bidet: Initiates a feminine wash.
• Lavado Turbo: Provides a stronger, more focused wash.
• Secado: Activa o secador de aire quente.
• Automático: Starts an automatic washing and drying cycle with a single touch.
• Luz: Toggles the LED night light on/off.
• Water Pressure / Drying Temp (HI/LO): Adjusts water pressure during wash or air temperature during drying.
• Nozzle Position (FR/BK): Adjusts the nozzle's forward or backward position.
• Temperatura da auga: Adjusts the water temperature.
• Temperatura do asento: Adjusts the heated seat temperature.
• Memoria: Saves current settings for personalized use.

Image 6.2: The LED display provides real-time information, and the 'Auto' button initiates a combined wash and dry cycle.

7. Mantemento

Limpeza regular:

• Limpeza de boquillas: The stainless steel nozzle performs an automatic self-cleaning cycle before and after each use. For additional cleaning, a manual nozzle cleaning function may be available via the control panel (refer to specific button if present).
• Limpeza da unidade: Always unplug the bidet toilet seat from the electrical outlet before cleaning. Use a soft, damp cloth and a mild, non-abrasive household cleaner. Avoid harsh chemicals, abrasive pads, or strong solvents, as these can damage the surface.
• Seat Removal for Cleaning: The bidet seat can be unclipped from the fixing plate for thorough cleaning of the toilet bowl and the underside of the seat. Refer to the installation steps in reverse to remove and reattach the seat.
• Exterior: Wipe down the exterior surfaces, including the control panel, with a soft, damp pano.

Almacenamento a longo prazo:

If the unit will not be used for an extended period, especially in cold climates, it is recommended to drain the water from the unit to prevent freezing damage. Consult a qualified plumber if you are unsure how to perform this task.

8 Solución de problemas

Esta sección aborda problemas comúns que podes atopar. Se o problema persiste, ponte en contacto co servizo de atención ao cliente.

9. Especificacións

10. Garantía e soporte

Información da garantía: Please refer to the product packaging or the official XCQQ website for detailed warranty terms and conditions. Retain your proof of purchase for warranty claims.

Atención ao cliente: For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact XCQQ customer support through the retailer where the product was purchased or visit the official XCQQ brand websitio.