Introdución
This manual provides instructions for the proper setup, operation, and maintenance of your Lykus HC-3011 Waterproof Hard Case. Designed for superior protection, this case features a durable polypropylene resin construction and customizable foam interior to safeguard your valuable items from water, dust, and impact.
Características do produto
- Construción robusta: Made from new polypropylene resin for enhanced durability.
- IP67 Certified Protection: Guarantees dust-tight and waterproof performance, safe within 3.3ft/1m under water.
- Customizable Foam Interior: Features pre-cut, pluckable foam for tailored item protection.
- Automatic Air Pressure Valve: Controls internal air pressure automatically.
- Pechaduras seguras: Equipped with press-and-pull latches for firm closure.
- Steel Hinge: One entire steel hinge provides stronger connection.
- Padlock Ready: Includes holes for padlocks (0.3in/0.75cm diameter) for added security.
Configuración: Personalización do interior de escuma
The Lykus HC-3011 case features a pre-cut, pluckable foam insert that allows you to create a custom fit for your items. Follow these steps for optimal protection:
- Prepare Your Items: Lay out all items you intend to store in the case on a flat surface, arranging them as they will sit inside the case. Ensure a minimum distance of 0.4 inches (1 cm) between items.
- Measure Your Items:
- Measure the total length of your arrangement from left to right.
- Measure the total width from front to back.
- Measure the height of your tallest item.
- Compare Dimensions: Refer to the "Specifications" section or the detailed size image to ensure your items fit within the case's usable foam dimensions. The object's height must be equal to or less than 3.5 inches (8.9 cm).
- Arranca a escuma: The foam is pre-scored into small squares. Carefully tear out the foam squares around the outline of your items. Start by tracing the shape, then gently pull out the unwanted foam sections.
- Proba de axuste: Place your items into the customized foam to ensure a snug and secure fit. Adjust as necessary.
Funcionamento da caixa
- Apertura: Lift the press-and-pull latches to release the lid.
- Peche: Align the lid with the base and press down firmly on the latches until they click into place. Ensure all latches are securely fastened to maintain the waterproof and dustproof seal.
- Automatic Air Pressure Valve: The integrated valve automatically adjusts internal pressure, which is particularly useful during changes in altitude or temperature. No manual operation is required for this feature.
- Using a Padlock: For added security, insert a padlock through the designated holes on the case. The holes accommodate padlocks with a shackle diameter of up to 0.3 inches (0.75 cm).
Mantemento
- Limpeza: Limpa o exterior da carcasa con publicidadeamp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners that could damage the finish or seals.
- Inspección do selo: Periodically inspect the rubber gasket around the lid for any signs of wear, cracks, or debris. A clean, intact gasket is crucial for maintaining the waterproof and dustproof seal.
- Coidado da escuma: The foam can be gently cleaned with a vacuum cleaner or a damp cloth. Allow it to dry completely before reinserting items.
- Almacenamento: Garda a caixa nun lugar fresco e seco, lonxe da luz solar directa, cando non a uses.
Resolución de problemas
- Case not sealing properly:
- Ensure the rubber gasket is clean and free of debris.
- Check that all latches are fully engaged and clicked into place.
- Verify that no items are obstructing the seal when the lid is closed.
- Difficulty opening/closing latches:
- Apply gentle, even pressure when closing.
- Ensure the case is on a flat, stable surface.
- If latches are stiff, a small amount of silicone lubricant can be applied to the hinge points, avoiding the gasket.
Especificacións
| Número de modelo: | HC-3011 |
| Interior Size (foam removed): | 12.2 x 5.5 x 3.5 polgadas (31 x 13.9 x 8.9 cm) |
| Usable Foam Size (with foam): | 11.4 x 4.7 x 3.4 polgadas (29 x 12 x 8.8 cm) |
| Peso do artigo: | 2.31 libras |
| Material: | Resina de polipropileno |
| Clasificación impermeable/a prueba de po: | IP67 (SGS Certified) |
| Fabricante: | Lycus |
Garantía e Soporte
The Lykus HC-3011 Waterproof Hard Case comes with a lifetime limited warranty, reflecting Lykus's commitment to quality. For warranty claims or technical support, please refer to the contact information provided with your product packaging or visit the official Lykus websitio.
