1. Introdución
The Zalman P30 is a spacious Micro-ATX computer chassis designed to accommodate both Micro-ATX and Mini-ITX motherboards. It features panoramic frameless tempered glass panels for an unobstructed view of your internal components and comes with three pre-installed 120mm Addressable RGB fans for enhanced cooling and aesthetics. This manual provides essential information for the proper assembly, operation, and maintenance of your P30 case.
Figure 1: The Zalman P30 Micro-ATX Case showcasing its panoramic tempered glass and internal components with RGB lighting.
2. Información de seguridade
- Desconecte sempre a fonte de alimentación da toma de corrente antes de realizar calquera instalación ou mantemento.
- Handle tempered glass panels with care to prevent breakage. Avoid impacts or dropping the panels.
- Wear an anti-static wrist strap or frequently touch a grounded metal object to prevent electrostatic discharge (ESD) when handling internal components.
- Be cautious of sharp edges inside the chassis during installation.
- Keep the case and its components away from liquids and excessive humidity.
3. Contido do paquete
Verify that all listed components are included in your package:
- Zalman P30 Micro-ATX Case
- 3 x 120mm Addressable RGB Fans (pre-installed)
- Accessory Box (containing various screws, anti-vibration rings, cable ties, etc.)
- Manual de usuario (este documento)
4. Especificacións
| Característica | Especificación |
|---|---|
| Marca | Zalman |
| Nome do modelo | P30 |
| Tipo de caso | Mini-torre |
| Compatibilidade da placa base | Micro-ATX, Mini-ITX |
| Dimensións do produto (LxWxH) | 17.12 x 9.25 x 16.89 polgadas |
| Peso do elemento | 26.2 libras |
| Material | Aceiro de aliaxe, plástico, vidro temperado |
| Ventiladores preinstalados | 3 x 120mm ARGB (2x Side Intake, 1x Rear Exhaust) |
| Portos de E / S dianteiros | 1x USB-C, 1x USB 3.0, 1x Stereo/Mic 3.5mm AUX, Power Button w/ LED |
| Altura máxima do refrigerador da CPU | 173 mm |
| Lonxitude máxima da GPU | 420 mm |
| Soporte do radiador (superior) | Ata 360 mm |
| Tipo de montaxe da fonte de alimentación | Montaxe inferior |
Figure 2: Detailed dimensions of the Zalman P30 chassis.
5. Configuración
5.1. Instalación da placa base
The Zalman P30 supports Micro-ATX and Mini-ITX motherboards. Ensure your motherboard's form factor is compatible before proceeding.
- Remove the tempered glass side panel by gently pulling it open.
- Install the necessary motherboard standoffs. The case comes with pre-installed standoffs, and additional ones are provided in the accessory box if needed.
- Coloca con coidado a placa base sobre os separadores, aliñando os orificios dos parafusos.
- Fixe a placa base cos parafusos proporcionados.
Figure 3: Motherboard compatibility for the P30 case.
5.2. Instalación da fonte de alimentación
The power supply unit (PSU) is mounted at the bottom of the case.
- Deslice a fonte de alimentación no compartimento correspondente na parte inferior traseira da caixa.
- Secure the PSU using the screws provided in the accessory box.
- Conecta os cables de alimentación necesarios á placa base e a outros compoñentes.
5.3. Instalación do dispositivo de almacenamento
A caixa admite SSD de 2.5" e HDD de 3.5".
- Locate the storage drive bays/mounts within the chassis.
- Mount your 2.5" SSDs or 3.5" HDDs using the appropriate screws and anti-vibration rings from the accessory box.
5.4. Instalación da tarxeta gráfica
The Zalman P30 supports graphics cards up to 420mm in length.
- Retire as tapas das ranuras PCIe necesarias da parte traseira da caixa.
- Insert your graphics card into the primary PCIe slot on your motherboard.
- Fixa a tarxeta gráfica con parafusos.
- Utilize the pre-installed anti-sag bracket to support heavier graphics cards. Adjust its position and height as needed.
5.5. Instalación do ventilador e do radiador
The case comes with three pre-installed 120mm ARGB fans. Additional cooling options are available:
- Arriba: Supports up to 360mm radiators or 3x 120mm / 2x 140mm fans.
- Lateral: Supports 2x 120mm fans (pre-installed as intake).
- Traseira: Supports 1x 120mm fan (pre-installed as exhaust).
- Abaixo: Supports 3x 120mm / 2x 140mm fans.
Figura 4: Máisview of fan specifications and pre-installed ARGB fans.
5.6. Xestión de cables
The Zalman P30 features enhanced cable organization to maintain a clean build.
- Route all cables through the designated cutouts and rubber grommets behind the motherboard tray.
- Use the included cable ties to bundle and secure cables, preventing interference with airflow and maintaining a tidy interior.
Figure 5: Cable management features of the P30 case.
6. Instrucións de funcionamento
After completing the assembly, ensure all connections are secure before powering on your system.
- Encendido/apagado: Use the power button located on the front I/O panel.
- Control ARGB: The pre-installed ARGB fans can be customized via a 3-pin header connection to your motherboard's ARGB header. Use your motherboard's software to control lighting effects.
- E/S frontal: Connect peripherals to the USB-C, USB 3.0, and 3.5mm audio jacks on the front panel.
Figure 6: Front I/O panel details.
7. Mantemento
Un mantemento regular axuda a garantir un rendemento óptimo e unha maior duración dos compoñentes do teu PC.
- Filtros de po: The case features magnetic dust filters on the top and bottom panels. Regularly remove and clean these filters to maintain optimal airflow and prevent dust buildup.
- Eliminación do panel: The panoramic tempered glass front and side panels are tool-less and easily removable for cleaning and access to internal components.
Figure 7: Instructions for removing top panel and bottom dust filter.
8 Solución de problemas
Se tes problemas, ten en conta os seguintes pasos habituais para a súa resolución:
- Sen enerxía: Ensure the PSU is properly connected to the wall outlet and the motherboard. Check the PSU's on/off switch.
- Sen visualización: Verify that the graphics card is correctly seated in its PCIe slot and connected to the monitor. Check all power connections to the GPU.
- Fan/RGB Issues: Confirm that all fans and ARGB cables are securely connected to the motherboard or a dedicated controller. Check motherboard software for ARGB settings.
- Sobrequecemento: Ensure all fans are spinning correctly and dust filters are clean. Verify proper CPU cooler installation.
9. Vídeo do produto
Vídeo 1: Produto oficial rematadoview of the Zalman P30 Spacious Mini Tower Gaming PC Case, demonstrating its features and design.
10. Garantía e soporte
Zalman products are covered by a limited warranty. Please refer to the warranty card included in your package or visit the official Zalman websitio web para obter información detallada sobre os termos e condicións da garantía.
For technical support or customer service, please contact Zalman customer support through their official channels. Contact information can typically be found on the Zalman websitio web ou na documentación do produto.
