Ensenior AQ1-10I-60K-02-BL-M01

Ensenior 1800LM Solar Flood Lights Outdoor with Motion Sensor

Model: AQ1-10I-60K-02-BL-M01

Introdución

Thank you for choosing the Ensenior 1800LM Solar Flood Lights. This manual provides essential information for the proper installation, operation, and maintenance of your solar security lights. Please read it thoroughly before use and retain it for future reference.

These solar-powered flood lights are designed for outdoor use, featuring a motion sensor, adjustable heads, and multiple operating modes to enhance security and illumination around your property.

Contido do paquete

  • Ensenior Solar Flood Light Unit (2 units for 2-PACK)
  • Separate Solar Panel
  • Control remoto
  • Ferraxes de montaxe (parafusos, ancoraxes)
  • Manual de instrucións

Configuración e instalación

Proper installation is crucial for optimal performance. Ensure the solar panel receives direct sunlight for at least 6-8 hours daily.

1. Escolla unha localización

Select a mounting location for the light unit that provides the desired illumination coverage. The motion sensor has a 180° detection angle and up to 75ft sensing distance. The separate solar panel should be mounted in an area with maximum direct sunlight exposure.

Diagram showing the solar panel mounted separately from the light unit, connected by a long cable, illustrating flexible placement for optimal sun exposure.

The separate solar panel allows for flexible placement to maximize sun exposure, even if the light unit is in a shaded area.

2. Mounting the Light Unit

The light unit can be wall-mounted or right-angle mounted. Use the provided screws and anchors to securely fasten the light fixture to your chosen surface. The recommended installation height is 6.5-8.25 feet above the ground for a detection distance of up to 72 feet at 77 degrees Fahrenheit.

Two diagrams illustrating wall-mounted and right-angle mounted installation methods for the flood light unit.

Illustration of wall-mounted and right-angle mounted installation options.

3. Mounting the Solar Panel

Mount the solar panel in a location that receives maximum direct sunlight throughout the day. Connect the solar panel cable to the input port on the light unit. The cable length is approximately 14.8 feet (4.5m), providing flexibility for placement.

Diagram showing the dimensions of the solar flood light and its separate solar panel, including the 14.8 ft cable length.

Product dimensions and solar panel cable length for installation planning.

4. Adjusting Light Heads and Sensor

The light features 3 adjustable heads and a 180° adjustable motion sensor. Adjust the light heads to cover the desired area (up to 270° beam angle). Position the motion sensor to optimize detection range and sensitivity.

Diagram illustrating the adjustable features of the light heads and motion sensor, showing various rotation and tilt angles.

Adjustable light heads and motion sensor for customized illumination and detection.

Instrucións de funcionamento

Your Ensenior Solar Flood Light offers 5 distinct operating modes, controllable via the included remote or buttons on the light unit.

Modos de funcionamento:

  • Modo de seguridade: High brightness (1800 LM) flashes for 15 seconds when motion is detected, then stays on high brightness for 15 seconds before turning off.
  • Modo sensor: Turns on high brightness (1800 LM) for 30/60/120 seconds when motion is detected, then turns off after motion leaves.
  • Modo de sensor (ECO): Turns on medium brightness (240 LM) for 30/60/120 seconds when motion is detected, then turns off after motion leaves.
  • Modo de atenuación a sensor (ECO): Stays on low brightness (12 LM) continuously, then turns to medium brightness (240 LM) for 30/60/120 seconds when motion is detected, and dims back to 12 LM after motion leaves.
  • Modo activado: Keeps the light on medium brightness (240 LM) for 4 hours continuously.
Diagram illustrating the 5 operating modes of the Ensenior solar flood light, including Security Mode, Sensor Mode, Sensor Mode (ECO), Dim to Sensor Mode (ECO), and On Mode.

Visual representation of the 5 distinct operating modes.

Configuración do sensor de movemento:

The motion sensor has adjustable sensitivity (Low, Medium, High) and duration (30s, 60s, 120s). Adjust these settings using the dials on the sensor unit or the remote control to suit your needs.

Diagram showing the motion sensor with adjustable sensitivity dials (L, M, H) and detection distances (30ft, 53ft, 75ft).

Adjustable motion sensor sensitivity and detection range.

Mantemento

To ensure the longevity and optimal performance of your solar flood lights, follow these maintenance guidelines:

  • Panel solar limpo: Limpe o panel solar regularmente cun pano suave eamp cloth to remove dust, dirt, and debris. A clean panel ensures efficient charging.
  • Comproba as conexións: Periodically inspect all cable connections between the solar panel and the light unit to ensure they are secure and free from corrosion.
  • Eliminar obstáculos: Ensure no trees, bushes, or other objects are blocking direct sunlight from reaching the solar panel or obstructing the motion sensor's field of view.
  • Coidado da batería: The integrated Lithium-Ion batteries are designed for long life. If the light's performance significantly degrades over time, the batteries may need replacement by a qualified technician.

Resolución de problemas

If your Ensenior Solar Flood Light is not functioning as expected, refer to the following common issues and solutions:

ProblemaCausa posibleSolución
A luz non se acende pola noite.Carga insuficiente dos paneis solares.Asegúrate de que o panel solar estea exposto á luz solar directa durante 6-8 horas ao día. Limpa a superficie do panel solar.
Light stays on continuously or flashes.Incorrect mode setting or motion sensor sensitivity too high.Check the selected operating mode. Adjust motion sensor sensitivity to a lower setting. Ensure no constant motion is within the sensor's range.
Light is dim or has short illumination time.Batería baixa ou panel solar sucio.Allow the solar panel to charge fully in direct sunlight. Clean the solar panel.
O sensor de movemento non detecta movemento.Motion sensor obstructed or sensitivity too low.Clear any obstructions from the sensor. Increase motion sensor sensitivity. Ensure the sensor is pointed towards the desired detection area.

Especificacións

CaracterísticaDetalle
MarcaSenior
Número de modeloAQ1-10I-60K-02-BL-M01
Brillo1800 lúmenes (máx.)
Temperatura da cor6500 Kelvin (branco frío)
Fonte de enerxíaEnergía solar
Batería2 Lithium Ion batteries (2200mAh total, included)
Nivel de resistencia á augaImpermeable IP65
Ángulo do sensor de movemento180°
Distancia do sensor de movementoAta 75 pés
Ángulo do feixe270° (Adjustable 3 heads)
Método de controlMando a distancia, botón pulsador
MaterialAcrilonitrilo Butadieno Estireno (ABS)
Dimensións do produto9.06 cm de longo x 11.61 cm de ancho x 7.4 cm de alto
Lonxitude do cable do panel solar14.8 pés (4.5 m)
CertificaciónsFCC

Garantía e Soporte

Ensénior ofrece unha 3 ano de garantía for this product. If you encounter any quality issues or require assistance, please do not hesitate to contact Ensenior customer service. We aim to provide prompt service within 12 hours.

For further support or to explore other Ensenior products, please visit the official Ensenior store or contact our customer service team.

Soporte en liña: Visit the Ensenior Store on Amazon

Información importante de seguridade

  • Non desmonte nin modifique o produto.
  • Manter lonxe do lume ou de altas temperaturas.
  • Ensure proper installation to prevent falling hazards.
  • Elimina as baterías segundo a normativa local.

Documentos relacionados - AQ1-10I-60K-02-BL-M01

Preview Manual do usuario da luz de seguridade activada por movemento solar de Ensenior
Este manual de usuario proporciona instrucións para a luz de seguridade activada por movemento solar Ensenior, incluíndo a instalación, as características, os modos e as preguntas máis frecuentes. Detalla como configurar a luz de movemento, o panel solar e o control remoto para un rendemento óptimo.
Preview Luces LED de lata Ensenior: Guía de resolución de problemas e manual de usuario
O manual de usuario de Ensenior proporciona os pasos esenciais para a resolución de problemas das súas luces LED de 5/6 polgadas. Aborda problemas comúns como luces que non se acenden, problemas de regulación, parpadeos e zunidos. Obtén información sobre os reguladores de intensidade compatibles, a instalación correcta e ponte en contacto con Ensenior para obter asistencia. Inclúe as certificacións ETL, Energy Star, FCC e ROHS.
Preview Manual do usuario do ventilador de teito Ensenior de 52 polgadas con luz e control remoto
Manual de usuario completo para o ventilador de teito Ensenior de 52 polgadas, que detalla a instalación, o funcionamento, a resolución de problemas e as instrucións de seguridade para os modelos 52-335, 52-425 e 52-322.
Preview Manual do usuario e guía de resolución de problemas da lámpada de teito LED Ensenior
Manual de usuario completo para as lámpadas de teito LED Ensenior, que abrangue a instalación, a resolución de problemas comúns como luces apagadas ou parpadeantes, a compatibilidade dos reguladores de intensidade e as especificacións do produto. Inclúe información sobre a garantía e os datos de contacto da atención ao cliente.
Preview Ensenior 52" Ceiling Fan with Light Remote Control User Manual
Comprehensive user manual for the Ensenior 52-inch ceiling fan with light and remote control. Includes detailed product information, safety instructions, installation guide, remote operation, troubleshooting, warranty, and contact details.
Preview Manual do usuario e guía de resolución de problemas da lámpada de teito LED Ensenior
Manual de usuario completo para as lámpadas de teito LED ultrafinas Ensenior, que inclúe instrucións de instalación, guía de resolución de problemas, especificacións e compatibilidade de reguladores. Inclúe 5 anos de garantía e atención ao cliente.