1. Introdución
The Geniatech XPI-3566 is a high-performance single-board computer designed for various embedded applications. It features a Rockchip RK3566 processor with a built-in 0.8T NPU and up to 8GB of LPDDR4 RAM. This board supports multiple operating systems including Linux Debian10, Android 11, and Raspbian OS emulator, offering seamless migration capabilities for projects previously developed on Raspberry Pi platforms.
The XPI-3566 is equipped with a 40-pin GPIO extension interface, compatible with Raspberry Pi accessories, and supports 4K HDMI, MIPI-DSI, and MIPI-CSI display outputs. Integrated WiFi and wired network connections make it suitable for AI, machine learning, and multimedia applications.
Image 1.1: Geniatech XPI-3566 Single Board Computer, top view showing various ports and components.
2. Guía de configuración
2.1 Hardware completadoview
Familiarize yourself with the various ports and components on the XPI-3566 board before proceeding with setup.
Image 2.1: Labeled diagram of the XPI-3566 board, highlighting HDMI OUT, MIPI-DSI, MIPI-CSI, Type C, LAN, USB 3.0, USB 2.0, and Extension GPIO.
2.2 Fonte de alimentación
Connect a compatible 5V power supply to the USB Type-C port. Ensure the power supply can provide sufficient current for stable operation, especially when connecting multiple peripherals.
2.3 Conexión á pantalla
Connect your display device using one of the available interfaces:
- HDMI: For standard monitors and TVs.
- MIPI-DSI: For compatible display panels.
- MIPI-CSI: For compatible camera modules.
2.4 Conexións periféricas
- Portos USB: Connect keyboards, mice, and other USB devices to the USB 2.0 or USB 3.0 ports.
- Ethernet: For a wired network connection, plug an Ethernet cable into the LAN port.
- GPIO: The 40-pin GPIO header allows for connection to various sensors, actuators, and expansion boards. Refer to the pin definition table for details.
Image 2.2: Detailed pinout diagram for the 40-pin GPIO header, showing definitions for VCC, GND, I2C, UART, PWM, and other functions.
2.5 Instalación do sistema operativo
The XPI-3566 supports Linux Debian10, Android 11, and Raspbian OS emulator. Installation typically involves flashing an image to the eMMC storage or a TF card. Detailed instructions for flashing the OS can be found on the Geniatech support websitio.
3. Instrucións de funcionamento
3.1 Primeiro arranque
After connecting all necessary peripherals and flashing the operating system, connect the power supply. The board should boot automatically. Follow the on-screen prompts for initial setup of your chosen operating system.
3.2 Configuración de rede
The XPI-3566 supports both wired Ethernet and wireless WiFi/Bluetooth connectivity. Configure your network settings within the operating system's network manager. For WiFi, select your network and enter the password. For Bluetooth, pair with compatible devices.
3.3 Software Development and Applications
The XPI-3566 is designed for a wide range of applications, including:
- Programming Education
- Desenvolvemento de software
- Business Display Advertising Machines
- Touch Control All-in-one Machines
- Self-service Terminals
- Terminais multimedia
Its compatibility with Raspberry Pi's 40P GPIO and support for various operating systems facilitate diverse project development.
Imaxe 3.1: Ex.amples of XPI-3566 application scenarios, including programming education, software development, and various terminal uses.
Image 3.2: Illustration of software customization options, showing logos for RaspbianOS simulator, Debian 10, and Android 11.
4. Mantemento
To ensure the longevity and optimal performance of your Geniatech XPI-3566, follow these maintenance guidelines:
- Manter limpo: Regularly clean the board to prevent dust accumulation, which can lead to overheating. Use compressed air or a soft brush.
- Evita condicións extremas: Operate the board within its specified temperature and humidity ranges. Avoid direct sunlight, excessive heat, or moisture.
- Ventilación adecuada: Ensure adequate airflow around the board, especially if it is enclosed in a case.
- Conexións seguras: Periodically check all cable connections (power, display, peripherals) to ensure they are secure.
- Actualizacións de software: Keep your operating system and installed software updated to benefit from performance improvements and security patches.
5 Solución de problemas
If you encounter issues with your XPI-3566, consider the following troubleshooting steps:
5.1 No Power/No Boot
- Comprobar a fonte de alimentación: Ensure the power adapter is correctly connected and provides the specified 5V output with sufficient current.
- Verificar conexións: Confirm all cables are securely plugged in.
- Re-flash OS: If the board does not boot, the operating system image might be corrupted. Try re-flashing the OS to the eMMC or TF card.
5.2 Problemas de visualización
- Comprobación do cable: Ensure the HDMI, MIPI-DSI, or MIPI-CSI cable is properly connected to both the board and the display.
- Entrada de pantalla: Verify that your display is set to the correct input source.
- Configuración de resolución: If you see a distorted image, the resolution might be incompatible. Try booting with a different display or accessing the OS via serial console to adjust settings.
5.3 Problemas de conectividade de rede
- Ethernet con cable: Check the Ethernet cable and router connection. Verify network settings within the OS.
- WiFi/Bluetooth: Ensure the wireless module is enabled in the OS. Check WiFi network credentials and signal strength. For Bluetooth, ensure the device is discoverable.
5.4 Peripheral Not Detected
- Dispositivos USB: Try connecting the device to a different USB port. Ensure the device drivers are installed in the operating system.
- GPIO Devices: Verify your wiring and software configuration for the GPIO pins. Consult the 40-pin header definition.
6. Especificacións
Detailed technical specifications for the Geniatech XPI-3566 Single Board Computer:
| Característica | Especificación |
|---|---|
| Procesador | Rockchip RK3566, Quad-core Cortex-A55 |
| NPU | 0.8 TOPS |
| RAM | LPDDR4, 8 GB |
| Almacenamento | 8 GB eMMC (expandable via TF Card Slot) |
| Soporte do sistema operativo | Linux Debian10, Android 11, Raspbian OS emulator |
| Mostrar saída | 4K HDMI, MIPI-DSI, MIPI-CSI |
| Conectividade | Wi-Fi, Bluetooth, Gigabit Ethernet, GPIO |
| Portos USB | USB 3.0 x 1, USB 2.0 x 3 |
| GPIO | 40-pin header (Raspberry Pi compatible) |
| Dimensións | 3.4 x 2.2 x 0.7 polgadas |
| Peso | 1.6 onzas |
| Fabricante | Geniatech |
Image 6.1: Performance comparison highlighting the RK3566 processor's features like 1.8GHz frequency and 0.8 TOPS NPU.
Image 6.2: Comparison of ROM write speed and RAM read/write speed, demonstrating increased performance with eMMC design.
7. Garantía e soporte
For warranty information and technical support, please refer to the official Geniatech websitio web ou póñase en contacto directamente co servizo de atención ao cliente. Garde o recibo da compra como proba de compra.
Podes atopar máis información e recursos de apoio en Geniatech Store on Amazon.
