MIOBLUE 3-Pack Battery Operated Picture Light Instruction Manual

1. Introdución

This manual provides detailed instructions for the installation, operation, and maintenance of your MIOBLUE 3-Pack Battery Operated Picture Lights. Please read this manual thoroughly before use to ensure proper function and safety.

Image 1.1: MIOBLUE 3-Pack Picture Lights with Remote Controls. This image displays three gold-colored, circular picture lights designed to illuminate artwork, along with two remote controls for operation.

2. Contido do paquete

Verifica que todos os compoñentes estean presentes no teu paquete:

• 3 x MIOBLUE Battery Operated Picture Lights (Gold)
• 2 x Mandos a distancia
• Soportes e parafusos de montaxe
• Manual de instrucións

Note: 3 AA batteries per light are required and not included in the package.

3. Especificacións

4. Información de seguridade

• Asegúrese de que as pilas estean inseridas coa polaridade correcta (+/-).
• Non mesture pilas antigas e novas, nin tipos diferentes de pilas.
• Retire as pilas se non vai usar as luces durante un período prolongado.
• Manteña as pilas fóra do alcance dos nenos.
• Do not expose the lights to water or excessive moisture. These lights are not water resistant.
• Do not attempt to disassemble or modify the lights.

5. Configuración e instalación

5.1. Instalación da batería

1. Gently twist the back cover of the picture light counter-clockwise to open the battery compartment.
2. Insira 3 pilas AA (non incluídas) no compartimento, asegurando a polaridade correcta.
3. Replace the back cover by twisting it clockwise until secure.

Image 5.1: Installation and Control Overview. This image illustrates how to install batteries, use manual and remote controls, set the timer, install with screws, and utilize the magnetic attachment feature.

5.2. Montaxe das luces

The MIOBLUE Picture Lights offer two primary mounting options:

Option 1: Screw Installation (Permanent)

1. Choose the desired location for your picture light.
2. Position the mounting bracket against the wall and mark the screw holes.
3. Perforar orificios piloto se é necesario.
4. Fixe o soporte de montaxe á parede cos parafusos proporcionados.
5. The picture light unit has a strong magnetic base. Attach the light magnetically to the installed bracket.

Option 2: Magnetic Attachment (Temporary/Adjustable)

The lights feature a strong magnetic base, allowing them to be attached directly to any metallic surface without the need for screws. This is ideal for temporary placement or frequent adjustments.

6. Instrucións de funcionamento

Your MIOBLUE Picture Lights can be controlled via the included remote control or by manual touch.

6.1. Operación de control remoto

Ensure the remote control has batteries installed (typically CR2025, not included, or check remote for battery type). Point the remote towards the light for optimal response.

• ON/OFF: Preme o ON button to turn the light on, and the DESACTIVADO botón para apagalo.
• Axuste de brillo: Usa o + e - buttons to increase or decrease brightness (10% to 100%).
• Preset Brightness: Botóns etiquetados 30 %, 50 %, 100 % allow quick selection of brightness levels.
• Selección de temperatura de cor:
  • Luz cálida (3000K): Provides a soft, cozy glow.
  • Luz branca natural (4000K): Offers a balanced, neutral illumination.
  • Luz branca fría (6000K): Delivers a bright, crisp light.
• Función de temporizador: Preme o 15 MIN, 30 MIN, 60 MIN, ou 120 MIN buttons to set the light to automatically turn off after the selected duration.

Image 6.1: Lighting Modes and Brightness Adjustment. This image illustrates the three available color temperatures (warm, natural white, cool white) and the adjustable brightness range from 10% to 100%.

6.2. Control táctil manual

The light can also be controlled by touching the surface of the light unit:

• Activar/Desactivar: A short touch will cycle the light on or off.
• Cambiar a temperatura da cor: Continue short touching to cycle through the three color temperature modes (Warm, Natural White, Cool White).
• Axustar o brillo: A long press on the light surface will gradually adjust the brightness. Release to set the desired level.

Image 6.2: Control Methods. This image demonstrates both remote and manual touch control options, highlighting the timer and battery-operated features.

7. Mantemento

7.1. Limpeza

Wipe the lights with a soft, dry cloth. Do not use abrasive cleaners or solvents.

7.2. Substitución da batería

When the light output diminishes or the light stops responding, it is time to replace the batteries. Follow the steps in Section 5.1 for battery installation.

8 Solución de problemas

9. Garantía e soporte

For warranty information or technical support, please refer to the contact details provided at the point of purchase or visit the official MIOBLUE websitio. Garde o recibo de compra para reclamacións de garantía.