1. Introdución
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your REDFOX Akari APT-RH-20 Hammer Drill. Please read these instructions carefully before using the tool and keep them for future reference. This industrial-grade hammer drill is designed for drilling into various materials, including concrete and masonry, with a rated input power of 650W and a free speed of 850 RPM.
2. Instrucións de seguridade
Siga sempre as precaucións de seguridade básicas para reducir o risco de incendio, descarga eléctrica e lesións persoais ao usar ferramentas eléctricas.
- Seguridade na zona de traballo: Manteña a área de traballo limpa e ben iluminada. As zonas desordenadas ou escuras invitan aos accidentes. Non manexe ferramentas eléctricas en atmosferas explosivas, como en presenza de líquidos, gases ou po inflamables.
- Seguridade eléctrica: Os enchufes das ferramentas eléctricas deben coincidir coa toma de corrente. Nunca modifique o enchufe de ningún xeito. Evite o contacto corporal con superficies conectadas á terra, como tubaxes, radiadores, fogóns e frigoríficos.
- Seguridade persoal: Always wear eye protection. Use hearing protection when operating the tool for extended periods. Wear a dust mask if drilling generates dust. Dress properly; avoid loose clothing or jewelry.
- Uso e coidado da ferramenta: Non force a ferramenta eléctrica. Empregue a ferramenta eléctrica axeitada para a súa aplicación. Desconecte o enchufe da fonte de alimentación antes de facer axustes, cambiar accesorios ou gardar ferramentas eléctricas.
- Servizo: Fai reparar a túa ferramenta eléctrica por un reparador cualificado que utilice só pezas de substitución idénticas. Isto garantirá que se manteña a seguridade da ferramenta eléctrica.
3. Contido do paquete
Carefully unpack the contents and ensure all items are present and undamaged. If any items are missing or damaged, contact customer support immediately.
- 1 x REDFOX Akari APT-RH-20 Hammer Drill Machine
- 3 x Brocas
- 1 x Mango auxiliar
Image: The REDFOX Akari APT-RH-20 Hammer Drill, auxiliary handle, and drill bits neatly organized within its protective carrying case.
Image: The REDFOX Akari APT-RH-20 Hammer Drill displayed with its detachable auxiliary handle and the three included drill bits.
4. Configuración
4.1 Colocación da asa auxiliar
- Afloxe a manivela auxiliar xirándoa en sentido antihorario.
- Slide the handle over the front of the drill's body until it is in the desired position.
- Rotate the handle clockwise to tighten it securely. Ensure it is firm before operation.
4.2 Inserción de brocas
- Asegúrate de que o berbiquí estea desconectado da fonte de alimentación.
- Pull back the chuck collar on the front of the drill.
- Insert the desired drill bit into the chuck until it clicks into place.
- Release the chuck collar. Gently pull on the drill bit to ensure it is securely locked.
Imaxe: Un lado view of the REDFOX Akari APT-RH-20 Hammer Drill, showing the chuck and auxiliary handle attachment point.
5. Instrucións de funcionamento
5.1 Conexión de alimentación
Connect the drill to a suitable power outlet. The drill operates on a rated voltage of 220/110V. Ensure your power supply matches this requirement.
5.2 Selección do modo de funcionamento
The APT-RH-20 features a mode selector switch, typically located on the side of the drill body. Rotate this switch to select between drilling and hammer drilling modes, depending on your application.
- Modo de perforación: For drilling into wood, metal, or plastic.
- Modo de martelo perforador: For drilling into concrete, brick, or masonry, combining rotation with a hammering action.
5.3 Arranque e parada
- Para arrincar a furadeira, prema o interruptor de gatillo.
- Para deter a furadeira, solte o interruptor de gatillo.
- For continuous operation, press the trigger and then press the lock-on button (if present). To release, press the trigger again.
5.4 Técnica de perforación
- Hold the drill firmly with both hands, using the auxiliary handle for stability.
- Coloque a broca no punto de perforación desexado.
- Start the drill and apply steady, even pressure. Do not force the drill.
- Maintain a firm grip and control throughout the drilling process.
Imaxe: Unha detallada view of the main handle and trigger mechanism of the REDFOX Akari APT-RH-20 Hammer Drill, highlighting controls.
6. Mantemento
Un mantemento regular garante un rendemento óptimo e prolonga a vida útil da súa ferramenta.
- Limpeza: Despois de cada uso, desconecte a ferramenta e limpe o exterior cun pano suave eamp pano. Non empregue produtos químicos agresivos nin produtos de limpeza abrasivos. Manteña as aberturas de ventilación libres de po e residuos.
- Mantemento do mandril: Periodically clean the chuck to ensure smooth bit insertion and removal.
- Almacenamento: Store the drill in a dry, secure place, out of reach of children. Use the provided carrying case for protection.
- Escobillas de carbón: If the motor sparks excessively or the drill loses power, the carbon brushes may need inspection or replacement. This should be performed by a qualified service technician.
7 Solución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| A furadeira non arranca. | Sen subministración de enerxía; interruptor defectuoso; escobillas de carbón gastadas. | Check power connection. Test outlet. Contact service center if switch or brushes are suspected. |
| Reduced drilling power. | Worn drill bit; incorrect mode selected; carbon brushes worn. | Replace drill bit. Ensure correct mode (e.g., hammer drill for masonry). Contact service center. |
| Vibracións ou ruídos excesivos. | Loose components; damaged internal parts. | Stop operation immediately. Contact a qualified service technician. |
Para problemas que non aparecen na lista ou se as solucións non resolven o problema, póñase en contacto co servizo de atención ao cliente.
8. Especificacións
| Característica | Especificación |
|---|---|
| Número de modelo | APT-RH-20 |
| Marca | REDFOX / Akari |
| Tipo de broca | Broca de martelo |
| Potencia de entrada nominal | 650 W |
| Velocidade libre | 850 RPM |
| Max Hole Opening | 20mm (Note: Product title mentions 26mm, but detailed specifications and description state 20mm) |
| Voltage | 220/110V (Versatile) / 220 Volts (Specific) |
| Ampera | 2.83 Amps |
| Tamaño máximo de mandril | 0.5 polgadas |
| Dimensións do produto | 35L x 8W x 20H Centímetros |
| Peso do elemento | 2.45 quilogramos |
| Material | Plástico |
| Cor | Verde |
Image: The side of the REDFOX Akari APT-RH-20 Hammer Drill, displaying the product label with specifications like voltage, frequency, power, and RPM.
Image: The product packaging box for the Akari APT-RH-20 Rotary Hammer, featuring key specifications and branding.
9. Garantía
This REDFOX Akari APT-RH-20 Hammer Drill comes with a 6 meses de garantía from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, abuse, unauthorized repairs, or normal wear and tear. Please retain your proof of purchase for warranty claims.
10. Atención ao cliente
For technical assistance, warranty claims, or any other inquiries regarding your REDFOX Akari APT-RH-20 Hammer Drill, please contact:
- Fabricante: Akari India Pvt Ltd.
- Packer/Support: Royal Equipment
- Enderezo: Trichy-621009
- Correo electrónico: royalequipment19@gmail.com
- Teléfono: +91 9842002997
When contacting support, please have your model number (APT-RH-20) and purchase details ready.
