Manual do usuario do dron de pesca SwellPro FD3

1. Introdución

This manual provides essential instructions for the safe operation, setup, and maintenance of your SwellPro FD3 Fisherman Waterproof Fishing Drone. The FD3 is designed for marine environments, featuring IP67 waterproofing, a 4K camera, and a dual bait release mechanism for fishing applications. Please read this manual thoroughly before operating the drone to ensure proper use and to prevent damage or injury.

Pautas de seguridade

• Opera sempre o dron en zonas abertas, lonxe de persoas, animais e obstáculos.
• Mantén unha distancia de seguridade do dron durante a operación.
• Do not operate the drone in strong winds, heavy rain, or lightning.
• Ensure all batteries are fully charged before each flight.
• Inspeccione regularmente o dron para detectar calquera dano antes e despois do seu uso.
• Cumprir todas as leis e normativas locais relativas ao funcionamento de drons.

2. Contido do paquete

Verify that all items listed below are present in your package. If any items are missing or damaged, please contact SwellPro support.

Figura 2.1: The SwellPro FD3 Fisherman drone shown with its primary accessories, including the remote control, flight battery, charger, and bait release mechanism.

• SwellPro FD3 Fisherman Drone (x1)
• Control remoto (x1)
• Batería de voo intelixente (x1)
• Cargador de batería (x1)
• Propellers (sets)
• Dual Bait Release Mechanism (x1)
• Manual de usuario (este documento)
• Other accessories (e.g., cables, tools)

3. Configuración

3.1 Montaxe do drón

1. Conectar hélices: Carefully attach the propellers to the motor shafts. Ensure correct propeller type (CW/CCW) matches the corresponding motor. Tighten securely.
2. Install Flight Battery: Insert the intelligent flight battery into the drone's battery compartment until it clicks into place.
3. Attach Bait Release Mechanism: Secure the dual bait release mechanism to the drone's underside according to the provided diagrams. Ensure it is firmly attached and cables are connected.
4. Instalar cámara: Mount the 4K camera onto its designated gimbal or mounting point, ensuring all connections are secure.

Figura 3.1: Arriba abaixo view of the SwellPro FD3 drone, illustrating the propeller and motor configuration. Ensure propellers are correctly installed for safe flight.

3.2 Carga da batería

Charge both the intelligent flight battery and the remote controller battery before first use and after each flight.

• Conecte o cargador de batería a unha toma de corrente.
• Connect the flight battery to the charger. The indicator light will show charging status.
• Connect the remote controller to its charger (usually via USB).
• Charge until all indicator lights show a full charge.

3.3 Configuración do control remoto

Figura 3.2: The SwellPro FD3 drone positioned next to its remote control, which features a built-in display for real-time flight data and camera feed.

Power on the remote controller. If it does not automatically connect to the drone, follow the binding procedure outlined in the quick start guide or the full manual (if available separately) to establish a connection.

3.4 App Installation (Optional)

For advanced features and real-time telemetry, download the official SwellPro app from your device's app store. Follow the in-app instructions to connect your drone and remote controller.

4. Manexo do dron

4.1 Lista de verificación previa ao voo

• Ensure all batteries (drone and remote) are fully charged.
• Comprobe se as hélices están danadas e asegúrese de que estean fixadas de forma segura.
• Verify the bait release mechanism and camera are properly installed.
• Check the weather conditions (wind speed, rain).
• Ensure sufficient GPS signal (if operating in GPS mode).
• Clear the flight area of any obstacles, people, or animals.

Figura 4.1: The SwellPro FD3 drone in flight over water, demonstrating its waterproof capabilities. Always perform a pre-flight check before launching.

4.2 Controis básicos de voo

Refer to the remote controller diagram (usually found in the quick start guide) for specific stick and button functions. Common controls include:

• Stick Esquerdo: Throttle (up/down), Yaw (rotate left/right)
• Stick dereito: Pitch (forward/backward), Roll (left/right)
• Botón de volta á páxina de inicio (RTH): Inicia o regreso automático ao punto de engalaxe.
• Bait Release Button: Activates the bait release mechanism.
• Controis da cámara: Buttons for photo capture and video recording.

4.3 Bait Release Operation

1. Securely attach your fishing line with bait to the dual bait release mechanism. Ensure the weight does not exceed the drone's maximum payload capacity (4.4 lbs).
2. Fly the drone to your desired casting location.
3. Once in position, press the dedicated bait release button on the remote controller. The mechanism will open, dropping the bait.
4. Confirm the bait has been released via the camera feed or visual observation.

4.4 4K Camera Operation

• Ensure a compatible microSD card is inserted into the camera.
• Use the dedicated buttons on the remote controller to start/stop video recording or take photos.
• The live video feed will be displayed on the remote controller's screen or connected mobile device.

4.5 Auto Drop & Return

The FD3 features intelligent flight functions:

• Auto Drop: This refers to the automated bait release function, triggered by the remote controller.
• Retorno á casa (RTH): When activated, the drone will automatically fly back to its recorded takeoff point and land. This feature is also triggered automatically if the battery level is critically low or if the control signal is lost.

5. Mantemento

5.1 Limpeza

• After use, especially in saltwater environments, rinse the drone thoroughly with fresh water.
• Wipe the drone dry with a soft cloth. Ensure all ports and connectors are free of moisture before charging or storing.
• Clean the camera lens with a microfiber cloth.

5.2 Almacenamento

• Store the drone and batteries in a cool, dry place, away from direct sunlight and extreme temperatures.
• For long-term storage, discharge batteries to approximately 50-60% capacity.
• Remove propellers if storing in a compact case.

5.3 Coidado coa batería

• Non sobrecargue ou descargue en exceso as baterías.
• If a battery appears swollen or damaged, discontinue use immediately and dispose of it properly.
• Avoid puncturing or exposing batteries to extreme heat.

6 Solución de problemas

7. Especificacións

8. Garantía e soporte

For warranty information, please refer to the warranty card included with your product or visit the official SwellPro website. For technical support, troubleshooting assistance, or spare parts, please contact SwellPro customer service.

SwellPro Official Websitio: www.swellpro.com

Tenda Amazon: Visit the SwellPRO Store on Amazon