CNC4PC C94 + UC300ETH Motion Controller

1. Introdución

The CNC4PC C94 + UC300ETH is a high-speed motion controller designed for precision CNC applications. It utilizes an Ethernet connection to provide true real-time functions, ensuring reliable and accurate control. This integrated board supports popular CNC software such as Mach3/4 and UCCNC, offering flexibility for various setups. Its robust design allows for seamless connection with a wide range of components including steppers, VFDs, limit switches, home switches, probes, and more.

2. Características clave

• Integrated UC300ETH Motion Controller for reliable performance.
• Emulates 5 Parallel Ports for extensive connectivity.
• Features 3 Expansion Ports for connecting additional breakout or relay boards.
• Includes Two Analog Inputs and Two Analog Outputs for versatile control.
• Built-in PWM-Based Speed Control for precise spindle management.
• Two Built-in Electromechanical Relays with NO (Normally Open) and NC (Normally Closed) positions for spindle control.
• Incorporates a Safety Charge Pump for enhanced operational safety.
• Optoisolated inputs operating at 5-24VDC for robust signal isolation.
• Powered by a single 24VDC supply, generating isolated voltage for spindle control and +5VDC for TTL logic circuits.
• Driver Fault Detection for system monitoring and protection.

3. Configuración e conexións

Proper setup and connection are crucial for the optimal performance of your C94 + UC300ETH controller. Ensure all connections are secure and follow the wiring diagrams carefully. The board is designed for clean and simple connections to various CNC components.

As shown in Figure 2, the C94 + UC300ETH can interface with a wide array of peripherals:

• Interruptores de límite: Connect to the designated input ports for axis travel limits.
• Sonda: For automatic tool length measurement or surface mapping.
• Parada electrónica: Essential safety feature for immediate system shutdown.
• Plasma Torch Height Control and Touch Sensor: For plasma cutting applications.
• Electric Contactor: For controlling high-power devices.
• VFD Spindle Inverter: For variable frequency drive control of the spindle motor.
• Solid State Relay with Mist: For coolant or mist control.
• Stack Lights Tower: For visual status indication.
• Módulo láser: For laser engraving or cutting.
• Motor paso a paso: Connect your stepper drivers to the output ports.
• Pendant and Pendant Interface Card: For manual control and jogging.
• Breakout Boards and Relay Boards: Utilize expansion ports for additional I/O.

Refer to the detailed port labels on the board for specific wiring. The board features clearly marked input and output ports, relay connections, and power inputs.

4. Instrucións de funcionamento

The C94 + UC300ETH controller is compatible with Mach3/4 and UCCNC software. Once the hardware is correctly installed and powered, you will need to configure your chosen CNC software to communicate with the UC300ETH controller via Ethernet. This typically involves selecting the UC300ETH plugin within the software's configuration settings.

Follow the software-specific documentation for detailed instructions on driver installation, port mapping, motor tuning, and general operation. The controller provides the necessary hardware interface for the software to send commands to your CNC machine's motors and peripherals.

5. Mantemento

The C94 + UC300ETH is designed for durability and reliability. To ensure its longevity and optimal performance, consider the following maintenance guidelines:

• Manter limpo: Regularly clean the board and its surroundings to prevent dust and debris accumulation, which can lead to overheating or short circuits. Use compressed air or a soft brush.
• Control ambiental: Operate the controller in a dry, well-ventilated environment, free from excessive humidity, extreme temperatures, and corrosive substances.
• Xestión de cables Ensure all cables are neatly routed and secured to prevent accidental disconnections or damage.
• Fonte de alimentación: Use a stable and correctly rated 24VDC power supply to avoid voltage fluctuations that could harm the board.

6 Solución de problemas

If you encounter issues with your C94 + UC300ETH controller, consider the following basic troubleshooting steps:

• Sen alimentación/LED apagados: Check the 24VDC power supply connection and ensure it is providing the correct voltage.
• Sen comunicación: Verify the Ethernet cable connection. Ensure your PC's network settings are correctly configured for the UC300ETH (e.g., static IP if required by the software). Check if the UC300ETH plugin is enabled in your CNC software.
• Motor Not Moving: Confirm that your stepper drivers are powered and correctly wired to the C94. Check motor tuning settings in your CNC software.
• Input/Output Issues: Verify wiring for limit switches, probes, relays, etc. Ensure input signals are within the 5-24VDC range.
• Erros de software: Consult the documentation for Mach3/4 or UCCNC for specific error codes and solutions.

For more complex issues, it is recommended to consult the manufacturer's support resources or community forums.

7. Especificacións técnicas

8. Garantía e soporte

This product is covered by the standard manufacturer's warranty. Please refer to the warranty information provided at the time of purchase or contact CNC4PC directly for specific details regarding warranty terms and conditions.

For technical support, additional documentation, or to inquire about specific applications, please visit the official CNC4PC website or their support channels. You can find more information and resources related to the C94 controller on their blog: CNC4PC C94 Blog.