1. Produto rematadoview
The VIMIN VM-S250501M is a 2.5G Web Managed Ethernet Switch designed for high-performance network environments. It features five 2.5 Gigabit RJ45 ports and one 10 Gigabit SFP+ port, providing flexible connectivity options for various devices. This switch supports multiple speeds (100Mbps, 1Gbps, 2.5Gbps) with intelligent auto-negotiation, making it suitable for 2.5G NAS, gaming PCs, WiFi 6 routers, and 4K video streaming. It incorporates essential Layer 2 management features such as Link Aggregation, IGMP Snooping, Quality of Service (QoS), and VLAN support, all accessible through a user-friendly web-based graphical interface.
Figura 1: Fronte view of the VIMIN VM-S250501M switch, showing the 2.5G RJ45 ports, 10G SFP+ port, and LED indicators.
Figure 2: Illustration highlighting the durability, high compatibility, and versatility of the switch.
2. Instrucións de configuración
2.1 Contido do paquete
Verifique que os seguintes elementos estean incluídos no seu paquete:
- 1 x VIMIN VM-S250501M 2.5G Web Switch Ethernet administrado
- 1 x adaptador de alimentación
- 1 x Manual de usuario
Figure 3: The switch, power cable, and user manual are included in the package.
2.2 Instalación física
The switch can be placed on a desktop or mounted on a wall. Ensure proper ventilation around the device.
- Colocación do escritorio: Coloque o interruptor nunha superficie plana e estable.
- Montaxe na parede: The switch features two mounting holes at the base for wall installation. Use appropriate screws (not included) to secure the device to a wall.
2.3 Conexión de enerxía
- Connect the power adapter to the DC 12V/1A power port on the rear panel of the switch.
- Conecta o outro extremo do adaptador de corrente a unha toma de corrente estándar.
- The Power LED indicator on the front panel will illuminate when the switch is powered on.
2.4 Conexión de dispositivos de rede
Connect your network devices (e.g., computers, NAS, routers, access points) to the switch using appropriate Ethernet cables.
- Portos RJ45 (1-5): Use Category 5e (Cat5e) or Category 6 (Cat6) UTP cables for optimal performance with 1G/2.5G connections. For 100Mbps, Cat5 cables are sufficient.
- SFP+ Port (6): Insert a compatible 1G/2.5G/10G SFP+ optical fiber module (not included) into the SFP+ slot, then connect a fiber optic cable.
Figure 4: Illustrates connecting devices to the switch and recommended cable types for different speeds.
3. Funcionamento do interruptor
3.1 Indicadores LED
Os LED do panel frontal proporcionan información de estado en tempo real:
- 5*2.5G Ports (RJ45):
- Yellow: Indicates a 10/100/1000Mbps link or activity.
- Green: Indicates a 2.5Gbps link.
- 1*10G SFP (SFP+ Port):
- Green: Indicates a 1G/2.5G/10G link.
- Flashing: Indicates data transmission.
- PWR (potencia):
- On: o dispositivo está acendido.
- Apagado: o dispositivo está apagado.
Figure 5: Detailed explanation of the LED indicators on the switch.
3.2 Acceso ao Web Interface de xestión
The switch can be configured and managed via a webinterface gráfica de usuario (GUI) baseada en.
- Asegúrate de que o teu ordenador estea conectado a un dos portos RJ45 do conmutador.
- Abrir a web navegador (por exemplo, Chrome, Firefox, Edge).
- In the address bar, enter the default IP address: 192.168.1.199.
- Press Enter. A login page will appear.
- Introduza o nome de usuario e o contrasinal predeterminados:
- Nome de usuario: administrador
- Contrasinal: administrador
- Click "Log In" to access the management interface.
Recoméndase cambiar o contrasinal predeterminado despois do inicio de sesión inicial por motivos de seguridade.
Figura 6: Captura de pantalla do web páxina de inicio de sesión da interface de xestión.
3.3 Basic Management Features
O web interface provides access to various Layer 2 management functions:
- Agregación de ligazóns: Combine multiple physical links into a single logical link for increased bandwidth and redundancy. Supports static link aggregation.
- Marco Jumbo: Support for larger Ethernet frames (up to 12KB) to improve network efficiency for large data transfers.
- VLAN (Rede de Área Local Virtual): Segment your network into smaller, isolated broadcast domains. Supports up to 32 VLANs (on 4K VLAN IDs), MTU/Port/802.1Q VLAN.
- Calidade de servizo (QoS): Prioritize network traffic to ensure critical applications receive sufficient bandwidth. Supports port-based, 802.1p, and DSCP priority, with 4 priority queues, rate limiting, and storm control.
- IGMP Snooping: Optimizar a entrega do tráfico multicast, evitando a inundación innecesaria de paquetes multicast a todos os portos.
- Duplicación de portos: Copy traffic from one or more source ports to a destination port for network monitoring and analysis.
- Proba de cable: A diagnostic tool to check the status and length of connected Ethernet cables.
Figura 7: Máisview of the basic management features available through the web interface.
4. Mantemento
4.1 Coidados xerais
- Keep the switch in a cool, dry environment, away from direct sunlight, heat sources, and moisture.
- Ensure adequate airflow around the device to prevent overheating.
- Clean the exterior of the switch with a soft, dry cloth. Do not use liquid cleaners or aerosols.
4.2 Actualizacións de firmware
Periodically check the VIMIN official website for firmware updates. Firmware updates can provide new features, performance improvements, and security enhancements. Follow the instructions provided with the firmware update package carefully.
4.3 Reinicio do dispositivo
If the switch is not functioning correctly or you forget the login credentials, you can reset it to factory default settings. Locate the "Reset" button on the rear panel of the switch. With the switch powered on, use a paperclip or a similar pointed object to press and hold the Reset button for approximately 5-10 seconds until the LEDs flash, then release. The switch will restart with factory default settings.
5 Solución de problemas
5.1 Sen enerxía
- Asegúrate de que o adaptador de corrente estea conectado correctamente tanto ao interruptor como a unha toma de corrente que funcione.
- Verifica que a toma de corrente funcione conectando outro dispositivo.
- Comprobe se o adaptador de corrente presenta algún dano visible.
5.2 No Link/Connectivity
- Check the Ethernet cables connected to the switch and your devices. Ensure they are securely plugged in and not damaged.
- Verify the Link/Act LEDs on the switch for the connected ports. If they are off, there might be a cable issue or the connected device is not powered on/configured correctly.
- Try using a different Ethernet cable or port.
- Ensure the connected device's network adapter is enabled and configured correctly.
5.3 Velocidade de rede lenta
- Ensure you are using Cat5e or Cat6 cables for 1G/2.5G connections. Lower category cables may limit speed.
- Check the Link/Act LED color for the connected port. A yellow LED on a 2.5G port indicates a 1G or lower connection.
- Verify that your connected devices (e.g., network card, NAS) support 2.5G or 10G speeds.
- Check for network congestion or high traffic on your network.
- Consider updating the switch firmware.
5.4 Non se pode acceder Web Interface
- Ensure your computer is on the same network segment as the switch. The default IP is 192.168.1.199, so your computer's IP should be in the 192.168.1.x range (e.g., 192.168.1.100) with a subnet mask of 255.255.255.0.
- Verify that the Ethernet cable is properly connected and the Link/Act LED is on.
- Limpa a caché do teu navegador ou proba cun navegador diferente.
- If you have changed the switch's IP address and forgotten it, or forgotten the login password, perform a factory reset (refer to Section 4.3).
6. Especificacións
| Modelo | VM-S250501M |
| Estándares | IEEE 802.3/802.3u/802.3ab/802.3bz/802.3x/802.3cb |
| Portos | 5 x 10/100/1000/2500 Mbps RJ45, 1 x 10G SFP+ slot |
| Capacidade de conmutación | 45 Gbps |
| Táboa de enderezos MAC | 4K |
| Taxa de reenvío de paquetes | 33.48 Mpps |
| Marco jumbo | 12 KB |
| Búfer de paquetes | 8 Mbit |
| Fonte de alimentación | 12 V/1 A CC |
| Network Cable (Max 100m) |
|
| Método de montaxe | Desktop and Wall Mount |
| Temperatura de funcionamento | 0 ℃ ~ 45 ℃ (32 ℉ ~ 113 ℉) |
| Temperatura de almacenamento | -40 ℃ ~ 70 ℃ (-40 ℉ ~ 158 ℉) |
| Humidade de funcionamento | 10% ~ 90% sen condensación |
| Humidade de almacenamento | 5% ~ 95% sen condensación |
| Peso | 380 g |
| Dimensións (L x W x H) | 160 x 95 x 30 mm (6.3 x 3.7 x 1.2 polgadas) |
| Material da vivenda | Metal |
| Cor | Negro |
7. Garantía e soporte
7.1 Garantía do produto
The VIMIN VM-S250501M 2.5G Web Managed Ethernet Switch comes with a garantía dun ano desde a data de compra. Esta garantía cobre os defectos de fabricación e garante que o produto cumpre cos estándares de rendemento especificados en condicións de uso normal. Conserve o comprobante de compra para reclamacións de garantía.
7.2 Soporte técnico
VIMIN provides soporte técnico de por vida for this product. If you encounter any issues or have questions regarding the setup, operation, or troubleshooting of your switch, please contact our support team.
Información de contacto:
- Correo electrónico: support@vimintech.com
Figure 8: VIMIN support information, including email contact.
