1. Introdución
Thank you for choosing the Sunco LED Shop Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
Image 1.1: Sunco 4ft LED Shop Light
2. Información de seguridade
Para reducir o risco de morte, lesións persoais ou danos materiais por incendio, descarga eléctrica, caída de pezas, cortes, abrasións e outros perigos, lea todos os avisos e instrucións incluídos na caixa do dispositivo e en todas as etiquetas do dispositivo.
- AVISO: Risco de descarga eléctrica. Desconecte a alimentación no fusible ou no disyuntor antes da instalación ou do mantemento.
- AVISO: Risco de incendio. Minimum 90°C supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor.
- WARNING: Risk of Injury. Use lentes e luvas de seguridade durante a instalación e o mantemento.
- Este dispositivo está destinado a só para uso interior. Do not use in wet locations or where directly exposed to water.
- Este aparello é non regulable. Do not connect to a dimmer switch.
- Non modifiques o aparello. Calquera modificación pode anular a garantía e crear riscos para a seguridade.
- Asegurar a subministración voltage is compatible with the fixture (120V-277V).
3. Contido do paquete
Comprobe que todos os compoñentes estean presentes antes de comezar a instalación:
- 2 x Sunco LED Shop Light Fixtures
- Mounting Equipment (Surface)
4. Configuración e instalación
Follow these steps for a quick and easy setup. Always ensure power is disconnected at the source before proceeding.
- Preparar a localización de montaxe: Identify the desired ceiling location for the fixture. Ensure the mounting surface is capable of supporting the fixture's weight.
- Instalar o hardware de montaxe: Use the provided mounting equipment to securely attach the fixture housing to the ceiling. Refer to Image 4.1, Step 1.
- Conecte cables: Carefully connect the electrical wires from the power supply to the fixture's wires. Ensure proper polarity (live to live, neutral to neutral, ground to ground). Refer to Image 4.1, Step 2.
- Accesorio seguro: Once wiring is complete, snap the fixture into place, ensuring it is firmly seated against the mounting surface. Refer to Image 4.1, Step 3.
Image 4.1: Installation Steps
Daisy Chain Linkability
This fixture features daisy chain linkability, allowing multiple units to be connected for extended lighting coverage. To link fixtures, knock out the designated punch hole on the end of the fixture and connect the wires to the next unit. Ensure the total wattage of linked fixtures does not exceed the circuit's capacity.
Image 4.2: Daisy Chain Connection Point
5. Instrucións de funcionamento
The Sunco LED Shop Light is designed for simple operation and provides instant illumination upon activation.
Selectable Color Temperature (CCT)
Your fixture includes an integrated switch to select between three color temperatures: 4000K (Cool White), 5000K (Daylight), and 6000K (Bright White). Locate the CCT switch on the fixture and slide it to your desired setting before or after installation. The light will turn on instantaneously at the selected color temperature.
Image 5.1: Selectable CCT Options
6. Mantemento
The Sunco LED Shop Light is designed for long-lasting performance with minimal maintenance.
- Limpeza: Ensure the power is off before cleaning. Wipe the exterior of the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these may damage the finish or optical components.
- LED: The integrated LED light source is designed for a long lifespan (50,000 hours) and is not user-replaceable.
7 Solución de problemas
If you experience issues with your Sunco LED Shop Light, refer to the following common troubleshooting steps:
| Problema | Causa posible | Solución |
|---|---|---|
| A luz non se acende | Sen fonte de alimentación Cableado incorrecto CCT switch not set | Comprobe o disxuntor e o interruptor de parede. Verifique que todas as conexións dos cables estean seguras e sexan correctas. Ensure the CCT switch is set to a valid color temperature. |
| Luz parpadea | Fonte de alimentación inestable Conexión de cableado solta | Asegúrate de que a subministración de enerxía sexa estable e estea dentro do volume especificadotagrango. Comprobe que todas as conexións dos cables estean ben apertadas. |
| A luz non é tan brillante como se esperaba | Incorrect CCT setting Po ou residuos na lente | Adjust the CCT switch to a brighter setting (e.g., 6000K). Clean the lens according to maintenance instructions. |
8. Especificacións
| Marca | Iluminación Sunco |
| Número de modelo | WR_PR8-WH-4060K-2PK |
| Dimensións do produto | 48 cm de longo x 2.56 cm de ancho x 8.58 cm de alto |
| Wattage | 60 W |
| Brillo | 7200 lúmenes |
| Eficiencia | 118 LM/W |
| Temperatura de cor (CCT) | Selectable 4000K, 5000K, 6000K |
| Voltage | 120 V-277 V |
| Regulable | Non |
| Uso interior/exterior | Só no interior |
| Tipo de instalación | Montar a lavar |
| Característica especial | Enlazable |
| Tipo de fonte de luz | LED |
| Material | Alloy Steel, Polycarbonate |
| Vida Media | 50,000 horas |
| Certificacións | ETL, FCC, RoHS |
| Número de elementos | 2 (Paquete) |
9. Garantía e soporte
Sunco Lighting avala a calidade dos seus produtos.
- Garantía: This product is backed by a 3 ano de garantía desde a data de compra. Conserve o comprobante de compra para reclamacións de garantía.
- Atención ao cliente: For technical assistance, troubleshooting, or warranty inquiries, please contact Sunco Lighting customer support. Our knowledgeable support specialists are available to assist you.
Video 9.1: Get to Know Sunco Lighting - Learn about Sunco's commitment to quality and customer satisfaction.
