Thermalright AXP90-X36 Low Profile Manual do usuario do enfriador de aire da CPU

Produto rematadoview

The Thermalright AXP90-X36 is a low-profile CPU air cooler designed for compact systems such as HTPC and Mini-ITX builds. It features a 36mm height, a TL-9015 slim PWM fan, and AGHP (Anti-Gravity Heat Pipe) technology to ensure efficient cooling performance across various orientations.

Figure 1: Thermalright AXP90-X36 Low Profile Refrigerador de aire para CPU.

Características clave

Deseño compacto: 36mm total height, ideal for ITX motherboards and small form factor chassis.
Disipación de calor eficiente: Composed of a 92mm high-performance cooling fan, pure copper base, and 4 pure copper heat pipes.
AGHP Technology: 4x6mm heat pipes apply AGHP technique, solving inverse gravity effects for consistent performance in vertical/horizontal orientations.
TL-9015 Slim PWM Fan: 92mm fan with automatic temperature control and ultra-quiet operation (22.4db(A) noise level, 2700RPM ± 10% rotational speed).
Compatibilidade ampla: Supports Intel LGA1700/1851/1150/1151/1155/1156/1200 and AMD AM4/AM5 sockets.

AGHP Technology in Thermalright AXP90-X36 Cooler

Figure 2: AGHP (Anti-Gravity Heat Pipe) Technology ensures consistent performance in all orientations.

Figure 3: The cooler's total height is 36mm, designed for Mini-ITX motherboards and small form factor systems.

Configuración e instalación

This section provides detailed instructions for installing your Thermalright AXP90-X36 CPU Air Cooler on both Intel and AMD platforms. Please ensure your system is powered off and unplugged before beginning installation.

Intel Platform Installation (LGA115X/1200/1700/1851)

Remove the protective plastic sticker from the cooler's base.
Apply thermal compound evenly onto the CPU surface.
Carefully place the heatsink onto the CPU, ensuring correct airflow direction.
Align the motherboard mounting holes with the heatsink screws.
Install the backplate on the backside of the motherboard.
Secure the backplate and heatsink using the four hex nuts.
Tighten the nuts with the provided socket nuts.
Connect the fan header to the CPU_FAN socket on the motherboard.

Video 1: Installation guide for Intel 115x/1200 sockets. This video demonstrates the step-by-step process for mounting the Thermalright AXP90-X series cooler on compatible Intel motherboards, including thermal paste application and securing the heatsink.

Instalación da plataforma AMD (AM4/AM5)

Remove the protective plastic sticker from the cooler's base.
Remove the pre-installed brackets for Intel motherboards from the heatsink.
Install the brackets for AM4 motherboards onto the heatsink, ensuring the logo on the brackets faces towards the heatsink.
Install four short screws (from removed Intel brackets) into the heatsink.
Remove the existing AM4 plastic brackets and backplate from your motherboard.
Apply thermal compound evenly onto the CPU surface.
Carefully place the heatsink onto the CPU, aligning motherboard mounting holes to the screws.
Install the AM4 backplate on the backside of the motherboard, with the 'AM4' text facing outwards.
Pass the screws through the holes of the motherboard and backplate.
Secure the backplate and heatsink with the four hex nuts.
Tighten the nuts with the provided socket nut.
Connect the fan header to the CPU_FAN socket on the motherboard.

Video 2: Installation guide for AMD AM4 sockets. This video illustrates the installation process for the Thermalright AXP-X series CPU cooler on AMD AM4 motherboards, including bracket changes and securing the cooler.

Instrucións de funcionamento

Once installed, the Thermalright AXP90-X36 CPU Air Cooler operates automatically. The TL-9015 PWM fan adjusts its speed based on CPU temperature, ensuring optimal cooling performance while minimizing noise. No manual configuration is typically required for basic operation.

For advanced users, fan speed curves can be adjusted through your motherboard's BIOS/UEFI settings or dedicated software provided by your motherboard manufacturer. Refer to your motherboard manual for specific instructions on fan control settings.

Mantemento

Un mantemento regular axuda a garantir a lonxevidade e o rendemento óptimo do teu refrigerador de CPU.

Limpeza do po: Periodically clean dust from the heatsink fins and fan blades using compressed air or a soft brush. Ensure the system is powered off before cleaning.
Pasta térmica: The thermal compound applied between the CPU and heatsink may degrade over time. It is recommended to reapply fresh thermal paste every 1-2 years, or if the cooler is removed and reinstalled.
Inspección do ventilador: Check the fan for any signs of wear, damage, or unusual noise. If the fan is malfunctioning, it may need to be replaced.

Resolución de problemas

If you encounter issues with your Thermalright AXP90-X36 CPU Air Cooler, refer to the following common solutions:

Temperaturas altas da CPU:
- Ensure the heatsink is securely mounted and making full contact with the CPU.
- Verify that thermal paste was applied correctly and is not dried out. Reapply if necessary.
- Check for dust buildup on the heatsink fins and fan, and clean if needed.
- Confirm that the fan is spinning correctly and connected to the CPU_FAN header.
- Asegúrate de que haxa un fluxo de aire axeitado dentro da carcasa do teu PC.
O ventilador non xira:
- Check the fan cable connection to the CPU_FAN header on the motherboard.
- Verify fan settings in your motherboard's BIOS/UEFI.
- Inspeccione o ventilador para detectar calquera obstrución física.
Ruído excesivo do ventilador:
- Limpa calquera po das aspas do ventilador.
- Check for loose fan screws or vibrations.
- Adjust fan speed settings in BIOS/UEFI if running at maximum RPM unnecessarily.

Especificacións do produto

Característica	Especificación
Dimensións do produto	94.5mm L x 95mm W x 36mm H (3.72"L x 1.42"W x 3.74"H)
Marca	Dereito térmico
Tipo de conector de alimentación	PWM de 4 pines
Voltage	12 voltios (DC)
Wattage	3.6 vatios
Método de arrefriamento	Aire
Dispositivos compatibles	Desktop (Intel LGA1700/1851/1150/1151/1155/1156/1200; AMD AM4/AM5)
Nivel de ruído	22.4 Decibels (A)
Material	Aluminum (fins), Copper (base, heat pipes)
Velocidade de rotación máxima	2700 RPM
Capacidade de caudal de aire	42.58 CFM (MÁX)
Peso do elemento	1.04 libras
Compoñentes incluídos	CPU Fan, Mounting Hardware, Thermal Paste

Información de garantía e asistencia

Thermalright products are manufactured to high-quality standards. For warranty claims, technical support, or further assistance, please contact Thermalright customer service through their official websitio web ou o vendedor onde se comprou o produto.

Garde o comprobante de compra para validar a garantía.

	Guía de instalación do refrigerador de CPU Thermalright Royal Knight 120 Guía de instalación completa para o refrigerador de CPU Thermalright Royal Knight 120, que detalla a compatibilidade e os pasos de montaxe para AMD AM4/AM5 e varios sockets LGA Intel.
	Thermalright Peerless Assassin 120 Installation Guide Comprehensive installation guide for the Thermalright Peerless Assassin 120 CPU cooler, covering various Intel and AMD socket types.
	Guía de instalación do refrigerador de CPU Thermalright Peerless Assassin 140 Guía de instalación completa para o refrigerador de CPU Thermalright Peerless Assassin 140, que detalla os pasos para os sockets AMD AM4/AM5 e Intel LGA 115X, 1200, 1700, 1851, 2011 e 2066, xunto con instrucións de cableado do ventilador.
	Guía de instalación dixital de Thermalright Peerless Assassin 120 Guía completa de instalación para o refrigerador de CPU dixital Thermalright Peerless Assassin 120, que detalla as pezas, os pasos de montaxe para as plataformas AMD e Intel, as conexións do ventilador e da pantalla dixital e a configuración do software.
	Guía de instalación e usuario do refrigerador líquido Thermalright FROZEN WARFRAME Guía completa para instalar e usar o refrixerador líquido da serie Thermalright FROZEN WARFRAME, que inclúe instrucións de configuración do software e montaxe do hardware para varios sockets da CPU.
	Guía de instalación da serie Thermalright Phantom Spirit 120 Guía completa de instalación para o refrigerador de CPU Thermalright Phantom Spirit serie 120, que detalla as pezas, os pasos de montaxe para plataformas Intel e AMD e o cableado do ventilador.