Introdución
The Poly Wall Mount for TC10 is designed to provide a secure, elegant, and professional way to position your Poly TC10 device. This mount ensures optimal visibility and accessibility for the TC10, making it an ideal solution for various environments where the TC10 needs to be wall-mounted.
Información de seguridade
- Always ensure the mounting surface is structurally sound and can support the weight of the mount and the Poly TC10 device.
- Emprega as ferramentas e os accesorios axeitados para a instalación. En caso de dúbida, consulta cun profesional cualificado.
- Manteña as pezas pequenas e os materiais de embalaxe lonxe dos nenos para evitar riscos de asfixia.
- Do not overtighten screws, as this may damage the mount or the mounting surface.
- Ensure all cables are routed safely to prevent tripping hazards or damage.
O que hai na caixa
Verifique que estean presentes todos os compoñentes antes de comezar a instalación.
- Wall mount for TC10
- Mounting hardware (screws, anchors - specific types may vary based on package)
Configuración e instalación
Follow these steps to properly install your Poly Wall Mount for TC10.
Ferramentas necesarias (non incluídas):
- Broca
- Desaparafusador (recoméndase o de cabeza Phillips)
- Lapis
- Nivel
Pasos de instalación:
- Escolla localización: Select a suitable wall location for the Poly TC10, ensuring it is at an appropriate height for interaction and visibility. Consider proximity to power outlets and network connections for the TC10.
- Marcar os puntos de perforación: Hold the wall mount against the desired location on the wall. Use a pencil to mark the positions for drilling through the mounting holes on the bracket. Use a level to ensure the marks are aligned horizontally.
- Perforar buratos piloto: Using an appropriate drill bit size for your wall anchors (if applicable) and screws, drill pilot holes at the marked points.
- Insert Anchors (if needed): If drilling into drywall or other hollow surfaces, insert wall anchors into the pilot holes until flush with the wall surface.
- Attach Mount to Wall: Align the wall mount with the drilled holes (and anchors). Insert the provided screws through the mount's holes and into the wall/anchors. Tighten the screws securely with a screwdriver, but do not overtighten.
- Mount Poly TC10: Carefully align the Poly TC10 device with the mounted bracket. Gently slide or click the TC10 into place on the wall mount, ensuring it is securely seated and locked. Refer to the Poly TC10's own manual for specific attachment instructions if necessary.
- Xestión de cables Route any necessary cables (power, network) for the TC10 neatly behind or alongside the mount to maintain a clean and professional appearance.
Image: Poly TC10 securely mounted on a wall using the Poly Wall Mount.
Funcionamento da montura
The Poly Wall Mount is a passive accessory designed to hold the Poly TC10. Its operation is integrated with the use of the TC10 device itself.
- Once the TC10 is securely mounted, it is ready for use as per its own operational guidelines.
- The mount provides a stable and fixed position for the TC10, allowing for consistent interaction.
- Ensure the TC10 is properly seated in the mount at all times to prevent accidental dislodgement.
Mantemento
To ensure the longevity and appearance of your wall mount:
- Clean the mount periodically with a soft, dry cloth.
- Evita o uso de produtos de limpeza ou solventes abrasivos, xa que poden danar o acabado.
- Comprobe periodicamente os parafusos de montaxe para asegurarse de que permanecen axustados e seguros.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| O soporte parece solto na parede. | Screws are not tight enough or anchors are not properly seated. | Tighten mounting screws. If still loose, consider using larger anchors or relocating the mount to a stud. |
| Poly TC10 does not fit securely into the mount. | Orientación incorrecta ou obstrución. | Ensure the TC10 is oriented correctly according to the mount's design. Check for any debris or obstructions in the mounting slot. |
| Scratches on the mount surface. | Materiais de limpeza abrasivos empregados. | Use only soft, dry cloths for cleaning. Minor scratches may be permanent. |
Especificacións
| Característica | Detalle |
|---|---|
| Dimensións do produto | 7.87 x 4.72 x 1.38 polgadas |
| Peso do elemento | 9 onzas |
| Número de modelo do artigo | 874P8AA |
| Cor | negro |
| Fabricante | Poli |
| Dispositivos compatibles | Poly TC10 |
| Tipo de montaxe | Soporte de parede |
| O que hai na caixa | Wall mount for TC10 |
Garantía e Soporte
For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official Poly website. For technical support or further assistance, please contact Poly customer service through their official support channels.
Official Poly Websitio: www.poly.com
