1. Produto rematadoview
The MONTECH Sky Two GX is an E-ATX Mid Tower Case designed for high airflow performance, featuring a metal mesh front panel and pre-installed PWM ARGB fans. It offers enhanced compatibility and ease of use for PC builders.
Figura 1.1: Fronte view of the MONTECH Sky Two GX Black PC Case with the tempered glass side panel open, showcasing the interior and front mesh panel.
Características principais:
- Metal Mesh Front Panel: Ensures optimal airflow and dust protection with up to 51% porosity.
- Enhanced Dimensions: 10mm taller on top for better radiator support and 5mm wider cable management space (25mm total).
- Ventiladores preinstalados: Equipped with three AX140 ARGB PWM fans, supporting up to 11 fans in total.
- Swivel Side Panel: Improves accessibility and simplifies maintenance.
- Multifunctional Side Panel: Supports SSI-EEB motherboards and 2x 2.5-inch SSDs, with quick detachment for fan installation.
Figure 1.2: Diagram illustrating the increased height (10mm) for radiator support and wider cable management space (25mm) in the Sky Two GX compared to previous models.
2. Configuración e instalación
This section provides general guidelines for setting up your MONTECH Sky Two GX case. For detailed component-specific instructions, please refer to your component manuals.
2.1 Preparación do caso
- Desembalar a caixa: Retire con coidado a caixa da súa embalaxe. Inspeccione se houbo algún dano durante o envío.
- Eliminar os paneis laterais: The tempered glass side panel swivels open for easy access. The opposite side panel can be removed by unscrewing the thumbscrews.
- Caixa de accesorios: Locate the accessory box inside the case, which contains screws, zip ties, and other installation hardware.
2.2 Instalación de compoñentes
- Instalación da placa base: Install your E-ATX, ATX, Micro-ATX, or Mini-ITX motherboard onto the standoffs. Ensure proper alignment and secure with screws.
- Instalación da unidade de alimentación (PSU): Install the PSU into its dedicated compartment at the bottom rear of the case.
- Instalación da unidade de almacenamento:
- For 2.5-inch SSDs, use the dedicated mounts on the multifunctional side panel.
- For 3.5-inch HDDs, use the drive cage located near the PSU shroud.
- Instalación da tarxeta gráfica (GPU): Install your GPU into the appropriate PCIe slot. The case supports GPUs up to 400mm in length.
- Instalación do sistema de refrixeración:
- Fans: The case comes with three pre-installed 140mm ARGB PWM fans at the front. Additional fans can be installed at the top, rear, and bottom. The case supports up to 11 fans.
- Radiadores: The case supports radiators up to 360mm at the top and front.
- Enfriador de CPU: The case accommodates CPU coolers up to 168mm in height.
Figure 2.1: Internal layout diagram detailing component compatibility, including CPU cooler height, GPU length, PSU clearance, and radiator/fan support locations and sizes.
2.3 Xestión de cables
Utilize the 25mm cable management space behind the motherboard tray and the included zip ties to route and secure cables neatly. This improves airflow and aesthetics.
3. Instrucións de funcionamento
This section covers the basic operation of your MONTECH Sky Two GX case, focusing on its integrated features.
3.1 Panel frontal de E/S
O panel de E/S frontal proporciona un acceso cómodo aos portos e controis esenciais:
- Botón de encendido: Press to power on/off your system.
- Botón de reinicio: Press to restart your system.
- Portos USB 3.0 (x2): Para a transferencia de datos de alta velocidade con dispositivos compatibles.
- USB Type-C Port (x1): For modern USB-C devices.
- Conectores de son: Headphone and microphone jacks for audio peripherals.
Imaxe 3.1: Primeiro plano view of the top I/O panel, highlighting the USB 3.0, USB Type-C, audio ports, and power/reset buttons.
3.2 Control do ventilador ARGB
The pre-installed AX140 ARGB PWM fans offer customizable lighting. The RGB functionality of the front fans is dependent on your motherboard's RGB pins. For full synchronization and control, connect the fan RGB controller to your motherboard's ARGB header.
Refer to your motherboard's manual for specific instructions on controlling ARGB lighting via software.
Vídeo 3.1: Presentación oficial do produto en vídeoasing the MONTECH Sky Two GX case, highlighting its design and features, including the pre-installed ARGB fans.
4. Mantemento
Un mantemento regular axuda a garantir un rendemento óptimo e unha maior lonxevidade da carcasa do teu PC.
4.1 Limpeza
- Exterior: Use un suave, damp pano para limpar as superficies exteriores. Evite produtos de limpeza abrasivos.
- Filtros de po: The metal mesh front panel and other filtered areas are designed to be dustproof. Regularly clean these filters to maintain optimal airflow. The front panel features a quick-release mechanism for easy removal and cleaning.
- Interior: Use compressed air to remove dust from inside the case, especially from fans and heatsinks. Perform this outdoors or in a well-ventilated area.
Figure 4.1: Illustration of the innovative mesh front panel with its quick-release mechanism, designed for superior airflow and easy maintenance.
4.2 Panel Removal and Reinstallation
- Panel lateral de vidro temperado: This panel swivels open for convenient access. To fully remove, gently lift it off its hinges when fully open. Reinstall by aligning the hinges and closing the panel until it latches magnetically.
- Panel lateral de aceiro: Loosen the thumbscrews at the rear of the case, then slide the panel backward and lift it off. Reinstall by aligning the panel and securing the thumbscrews.
- Multifunctional Side Panel: This panel can be quickly detached for fan installation or accessing 2.5-inch SSD mounts. Refer to the internal switch for opening/closing.
5 Solución de problemas
This section addresses common issues you might encounter with your MONTECH Sky Two GX case.
5.1 Fans Not Spinning or RGB Not Lighting Up
- Conexión de alimentación: Ensure all fans are properly connected to the motherboard fan headers (PWM) and the fan RGB controller is powered via SATA.
- RGB Connection: Verify that the fan RGB controller is correctly connected to your motherboard's ARGB header (3-pin, 5V).
- Software da placa base: Check your motherboard's RGB control software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) to ensure fans are enabled and configured correctly.
- Integridade do cable: Inspect fan cables for any damage or loose connections.
5.2 Poor Airflow or High Temperatures
- Acumulación de po: Limpe todos os filtros de po e os compoñentes internos como se describe na sección de Mantemento.
- Orientación do ventilador: Ensure fans are installed with the correct airflow direction (intake/exhaust) for optimal cooling. Front fans typically act as intake, rear and top as exhaust.
- Xestión de cables Poor cable management can obstruct airflow. Reroute cables to minimize obstruction.
- Espazo libre dos compoñentes: Verify that large components (e.g., CPU cooler, GPU) are not excessively close to case panels or other components, which could restrict airflow.
5.3 Os portos de E/S frontais non funcionan
- Motherboard Connections: Ensure the front I/O cables (USB 3.0, USB Type-C, HD Audio, Power SW, Reset SW, Power LED, HDD LED) are correctly connected to the corresponding headers on your motherboard. Refer to your motherboard manual for header locations.
- Problemas do controlador: For USB ports, ensure your operating system has the latest USB drivers installed.
6. Especificacións
| Característica | Detalle |
|---|---|
| Marca | Montech |
| Nome do modelo | Sky Two GX Black |
| Número de modelo do artigo | SKYTWOGXB |
| Tipo de caso | Mid Tower (Desktop) |
| Compatibilidade da placa base | E-ATX, ATX, Micro-ATX, Mini-ITX |
| Material | Tempered Glass, Metal Mesh |
| Cor | Negro |
| Peso do elemento | 13.97 libras |
| Dimensións do produto (LxWxH) | 18 x 20 x 10 polgadas |
| Ventiladores preinstalados | 3 x 140mm ARGB PWM (Front) |
| Soporte máximo de ventiladores | Ata 11 fans |
| Soporte radiador | Up to 360mm (Top, Front) |
| Altura máxima do refrigerador da CPU | 168 mm |
| Lonxitude máxima da GPU | 400 mm |
| Lonxitude máxima da PSU | 210 mm |
| Portos de E / S dianteiros | 2x USB 3.0, 1x USB Type-C, Audio In/Out, Power, Reset |
| Espazo de xestión de cables | 25 mm |
7. Garantía e soporte
MONTECH provides a limited warranty for the Sky Two GX PC case. Please retain your proof of purchase for warranty claims.
7.1 Información da garantía
For detailed warranty terms and conditions, please visit the official MONTECH websitio ou póñase en contacto co seu servizo de atención ao cliente.
7.2 Soporte técnico
If you encounter any issues not covered in this manual, or require further assistance, please contact MONTECH technical support through their official channels:
- Websitio: www.montechpc.com
- Correo electrónico: Consulte o websitio para enderezos de correo electrónico de soporte.
- Teléfono: Consulte o websitio para os números de contacto rexionais.
Please have your product model number (SKYTWOGXB) and proof of purchase ready when contacting support.
