Produto rematadoview
The RYOBI 25cc Gas Jet Fan Blower is a powerful handheld tool designed for efficient clearing of leaves, grass, and debris. It features a 2-cycle engine, jet fan design, variable speed trigger, and cruise control for optimal performance and user comfort.
- Motor: 25cc Gas, 2-Cycle
- Velocidade do aire: Ata 160 MPH
- Volume de aire: 520 CFM
- Características: Jet Fan Design, Variable Speed Trigger, 3-Position Cruise Control, Anti-Vibe Handle
- Factor de forma: Portátil
Configuración e montaxe
Desembalaxe e inspección inicial
Carefully remove all components from the packaging. Inspect for any damage. Ensure all parts listed in the packing list are present.
Instrucións de montaxe
- Attach Blower Tubes: The blower tube typically comes in multiple sections. Align the sections and push them together until they securely click into place. Some models may use clips or screws for additional security.
- Install Control Handle (if applicable): If your model includes a separate control handle for the blower tube, attach it to the designated slot on the tube. Ensure it is firmly secured and allows for comfortable operation.
- Connect Flexible Hose (if applicable): For models with a flexible hose connecting the engine unit to the blower tube, attach the hose securely to both ends using the provided clamps.
Preparación de combustible
This RYOBI blower uses a 2-cycle engine and requires a specific gasoline-to-oil mixture. Refer to the fuel tank cap or the engine label for the exact ratio. A common ratio for 25cc 2-cycle engines is 25:1 or 40:1. Always use fresh, unleaded gasoline with an octane rating of 89 or higher and a high-quality 2-cycle engine oil.
- Mix the gasoline and 2-cycle oil in a separate, approved fuel container.
- Shake the container thoroughly to ensure proper mixing.
- Do not mix fuel directly in the blower's fuel tank.
Fueling the Blower
- Coloque o soplador nunha superficie plana.
- Limpa a zona arredor da tapa do depósito de combustible para evitar que entre sucidade no depósito.
- Retire coidadosamente a tapa do combustible.
- Pour the prepared fuel mixture into the fuel tank using a funnel to avoid spills.
- Do not overfill. Leave space for fuel expansion.
- Volva colocar a tapa do depósito de combustible de forma segura.
Instrucións de funcionamento
Starting the Engine (Cold Start)
- Cebar o motor: Press the primer bulb 10 times until fuel is visible in the return line.
- Axustar estrangulador: Move a palanca do estrangulador á posición CERRADO.
- Set Speed Control: Push the speed control lever all the way forward.
- Corda de arranque: Place the blower on a flat, stable surface. Hold the blower firmly with one hand and pull the starter rope until the engine attempts to start (you may hear a puff noise). Do not pull more than 3 times.
- Axustar o estrangulador: Move the choke lever to the MIDDLE position.
- Restart Engine: Pull the starter rope again until the engine fully starts and runs.
- Quecemento: Let the engine run for approximately 10-30 seconds.
- Estrangulamento aberto: While fully squeezing and holding the trigger, move the choke lever to the OPEN or OFF position.
- Final Warm-up: Allow the engine to run for an additional 1 minute to fully warm up before use.
Usando o soplador
- Disparador de velocidade variable: Control the air speed by adjusting the pressure on the trigger.
- Control de crucero: Engage the 3-position cruise control for continuous operation at a desired speed without holding the trigger.
- Anti-Vibe Handle: The anti-vibration handle with overmolded grips is designed for optimized user comfort during extended use.
Mantemento
Comprobacións periódicas
- Filtro de ar: Regularly inspect and clean the air filter to ensure proper engine performance and prevent overheating. Replace if damaged.
- Buxía: Check the spark plug periodically for wear and carbon buildup. Clean or replace as needed to ensure easy starting and efficient combustion.
- Liñas de combustible: Inspect fuel lines for cracks or leaks. Replace any damaged lines immediately.
- Limpeza xeral: Keep the blower's air intake and exterior free of debris to maintain optimal airflow and prevent engine strain.
Almacenamento
- For long-term storage, drain all fuel from the tank and run the engine until it stops to clear the carburetor.
- Limpa ben o soplador antes de gardalo.
- Gardar nun lugar seco e ben ventilado, lonxe da luz solar directa e de temperaturas extremas.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| O motor non arrancará | Sen combustible ou mestura de combustible incorrecta | Fill tank with correct 2-cycle fuel mixture. |
| Spark plug fouled or wet | Limpar ou substituír a bujía. | |
| Estrangulador non axustado correctamente | Follow cold start procedure. | |
| Perda de potencia | Filtro de aire obstruído | Limpar ou substituír o filtro de aire. |
| Combustible vello ou rancio | Drain old fuel and refill with fresh mixture. |
Especificacións
- Marca: RYOBI
- Modelo: SOPLADOR
- Cilindrada do motor: 25 cc
- Tipo de motor: Gasolina de 2 tempos
- Velocidade máxima do aire: 160 MPH
- Volume máximo de aire: 520 CFM
- Fonte de enerxía: Funciona a gas
- Factor de forma: Portátil
- Características especiais: Jet Fan Design, Variable Speed Trigger, 3-Position Cruise Control, Anti-Vibe Handle
- UPC: 659821583744
Medios de comunicación do produto
Imaxes do produto
Vídeos oficiais de produtos
Garantía e Soporte
Para obter información sobre a garantía, asistencia técnica ou para solicitar pezas de reposto, consulte a páxina oficial de RYOBI websitio web ou póñase en contacto directamente co servizo de atención ao cliente. Garde o recibo da compra como proba da mesma.
- Atención ao cliente: Refer to your product packaging or the official RYOBI websitio para os detalles de contacto.
- Recursos en liña: Visit the RYOBI website for additional manuals, FAQs, and product registration.
