Introdución
Thank you for choosing the ErGear Electric Standing Desk. This manual provides comprehensive instructions for the assembly, operation, and maintenance of your new height-adjustable desk. Please read this manual carefully before assembly and use to ensure safe and efficient operation.
Image: The ErGear Electric Standing Desk, 44x24 inches, in vintage brown, set up with a laptop, monitor, and other office items. It features a control panel for height adjustment.
Información importante de seguridade
- Do not exceed the recommended maximum weight limit of 176 pounds to ensure stability and longevity of the desk.
- Ensure all cables are properly managed and have sufficient slack to avoid damage or disconnection during height adjustments.
- Manteña os nenos e as mascotas lonxe da mesa durante o funcionamento para evitar lesións.
- Evite colocar líquidos directamente sobre o panel de control ou preto de compoñentes eléctricos.
- Empregue só o adaptador de corrente e os compoñentes fornecidos.
- Comprobe regularmente todos os parafusos e conexións para garantir que estean ben axustados.
Contido do paquete
Before beginning assembly, please verify that all components are present and undamaged. Refer to the assembly video for a visual guide to the parts.
- Desktop (Two-piece)
- Patas de escritorio (2)
- Side Plates (2)
- Varilla de transmisión
- Panel de control
- Adaptador de alimentación
- Clips de xestión de cables
- Ganchos para auriculares (2)
- All necessary screws and tools (Allen wrench, etc.)
Imaxe: Unha explosión view of the ErGear Electric Standing Desk components, including the two-piece desktop, leg frames, control panel, and various hardware, laid out on a white background.
Configuración e montaxe
Follow these steps to assemble your ErGear Electric Standing Desk. An average assembly time is approximately 30 minutes.
Step 1: Assemble the Desk Legs
- Attach the foot pads to the bottom of each leg.
- Connect the leg frames using the provided crossbar and screws. Ensure all screws are tightened securely.
Imaxe: Primeiro plano view of the desk leg assembly, showing screws being inserted to secure the leg components.
Step 2: Attach Side Plates and Transmission Rod
- Secure the side plates to the top of the assembled leg frames using the designated screws.
- Insert the transmission rod into the appropriate slots on the leg frames and motor assembly. Ensure it is fully engaged. If the desk legs are not the same height, insert the rod into the left leg and turn to adjust until they are level.
Image: The desk frame with the transmission rod correctly installed, connecting the two leg mechanisms.
Step 3: Assemble the Desktop and Other Parts
- Place the two-piece desktop upside down on a soft, clean surface.
- Align the desktop pieces and secure them together using the provided connectors and screws.
- Carefully place the assembled leg frame onto the desktop, aligning the screw holes.
- Attach the leg frame to the desktop using the provided screws.
- Install the control panel and headphone hooks to the underside of the desktop as indicated in the instructions.
Image: The underside of the desk, showing the control panel and cable management clips attached to the desktop.
Paso 4: Conecte os cables
- Connect the motor cable to the control box.
- Connect the control panel cable to the control box.
- Connect the power adapter to the control box and then to a power outlet.
- Use the provided cable management clips to organize all cables neatly.
Para obter unha guía visual paso a paso, consulta o vídeo oficial da montaxe:
Video: Official ErGear Electric Standing Desk Assembly Video. This video demonstrates the complete assembly process for the EGESD4/5/6 models, including attaching legs, side plates, transmission rod, desktop, and connecting cables.
Instrucións de funcionamento
Your ErGear Electric Standing Desk features an intuitive control panel for easy height adjustment and memory presets.
Axuste de altura
- Subir escritorio: Manteña premido o Frecha cara arriba (▲) button to raise the desk to your desired height.
- Escritorio inferior: Manteña premido o Frecha cara abaixo (▼) button to lower the desk to your desired height.
- The desk height can be adjusted smoothly from 28.35 inches to 46.46 inches.
Image: A close-up of the ErGear desk control panel, showing the digital height display and the up/down arrow buttons for manual adjustment.
Presets de memoria
The control panel allows you to save up to three preferred height settings for quick transitions.
- Para gardar unha predefinición: Adjust the desk to your desired height using the up/down arrows. Press the "S" button, then immediately press one of the number buttons ("1", "2", ou "3") para gardar a altura actual nesa predefinición.
- Para usar unha predefinición: Simplemente prema o botón numérico correspondente ("1", "2", ou "3"). The desk will automatically move to the saved height.
Observe the smooth operation of the desk's height adjustment:
Video: A user demonstrating the height adjustment feature of the ErGear Standing Desk. The desk smoothly moves up and down, showcasing the electric motor's functionality and the ease of using the control panel.
Mantemento
- Limpeza: Limpar a superficie do escritorio cun pano suave eamp pano. Evite produtos químicos agresivos ou produtos de limpeza abrasivos que poidan danar o acabado.
- Inspección: Comprobe periodicamente todos os parafusos e conexións para asegurarse de que estean ben axustados. Volva a apertalos se é necesario.
- Xestión de cables Ensure cables remain organized and free from entanglement to prevent damage during height adjustments.
- Coidados do motor: The motor is designed for long-term operation. Avoid overloading the desk beyond its maximum weight capacity.
Resolución de problemas
| Problema | Causa posible | Solución |
|---|---|---|
| O escritorio non se move. | Power cable disconnected; motor cable disconnected; overload. | Check all cable connections. Ensure desk is plugged into a working outlet. Reduce weight on the desk. |
| O escritorio móvese de xeito irregular. | Transmission rod not properly engaged; uneven weight distribution. | Verify the transmission rod is fully inserted and adjusted. Distribute weight evenly on the desktop. |
| O escritorio fai ruídos estraños. | Loose screws; obstruction. | Check and tighten all assembly screws. Ensure no objects are obstructing the lifting mechanism. |
| Os preajustes da memoria non funcionan. | Predefinicións non gardadas correctamente. | Re-save your desired height settings by pressing "S" then the number button. |
Especificacións
- Marca: ErGear
- Número de modelo: EGESD71V-US
- Deseño de escritorio: Escritorio eléctrico de pé
- Material de escritorio: Madeira de enxeñaría (laminada)
- Material base: Aceiro de aliaxe
- Cor: Vintage marrón
- Tamaño: 44 x 24 polgadas
- Altura mínima: 28.35 polgadas
- Altura máxima: 46.46 polgadas
- Espesor da mesa: 0.75 polgadas
- Peso máximo recomendado: 176 libras
- Montaxe necesaria: Si (Recomendado 1 persoa)
- Listado UL: Si
Información da garantía
ErGear products come with a limited warranty. For specific details regarding your product's warranty coverage, please refer to the documentation included with your purchase or visit the official ErGear websitio.
- Desktop and Desk Frame: Protección de 5 anos
- Motors and Electrical Components: Protección de 2 anos
Atención ao cliente
If you encounter any issues or have questions regarding your ErGear Electric Standing Desk, please contact our customer support team for assistance.
- Soporte en liña: Visit the official ErGear websitio web con preguntas frecuentes e recursos de asistencia.
- Correo electrónico: Refer to your product packaging or the ErGear websitio web para enderezos de correo electrónico de atención ao cliente.
- Teléfono: Refer to your product packaging or the ErGear websitio web con números de teléfono de atención ao cliente.
