INGQI 241854301, 5303918549

INGQI 241854301 5303918549 Evaporator Fan Motor Replacement Instruction Manual

Modelos: 241854301, 5303918549

Brand: INGQI

1. Introdución

This instruction manual provides essential information for the installation, operation, maintenance, and troubleshooting of the INGQI 241854301 and 5303918549 Evaporator Fan Motor Replacement. This motor is designed to circulate cold air from the evaporator coil throughout the refrigerator and freezer compartments, ensuring proper cooling.

Please read this manual thoroughly before attempting any installation or maintenance to ensure safe and correct usage.

2. Información de seguridade

AVISO: Risco de descarga eléctrica

  • Always disconnect power to the appliance before servicing. Failure to do so can result in serious injury or death.
  • Use equipos de protección persoal axeitados, como luvas e lentes de seguridade.
  • If you are not comfortable performing electrical repairs, consult a qualified technician.
  • Asegúrese de que todas as conexións estean seguras e debidamente illadas despois da instalación.

3. Que hai na caixa

O seu paquete debe conter os seguintes elementos:

  • 1x Evaporator Fan Motor (with integrated plastic wire retainer clips and terminal connectors)

4. Especificacións

ParámetroValor
Voltage120 V
Frecuencia60 Hz
Wattage6 W
Ampera0.1 A

5. Compatibilidade

This evaporator fan motor replacement is compatible with various refrigerator models from several brands. The primary replacement part numbers are 241854301 and 5303918549. It also replaces AP4343697, 1465278, AH2331827, EA2331827, PS2331827, 1637660, 240315801, 240315802, 240315803, 240369701, 240369702, 241537301, 5304445861, AP4700070, SM4301, AH34198, PS341983939, EA3419839.

Known compatible brands and example models include:

  • Kenmore / Sears: 253.61502405, 253.61502407, 253.61502408, 253.61502409, 253.61512405, 253.61512406, 253.61512408, 253.61512409, 253.61522011, 253.61522012, etc.
  • Electrolux Frigidaire: CFHT1513LZ3, CFHT1513LZ4, CFHT1713LZ0, CFHT1713LZ1, CFHT1713LZ2, CFHT1713LZ3, CFHT1713LZZ, CFHT1814LZ0, CFHT1814LZ1, CFHT1814LZ3, CFHT1814LZ4, CFHT1826LP0, CFHT1826LP1, CFHT1826LP3, CFHT1826LP4, CFHT1826LP5, CFHT1826LP6, CFHT1826LP7, CFHT1842LS0, CFHT1842LS1, CFHT1842LS3, CFHT1842LS4, CFHT1842LS6, CFHT1842LS7, CFHT1842PS0, CFHT1842PS1, CFHT1842PS2, CFHT1842PS4, CFHT1843LS0, CFHT1843LS1, CFHT1843LS3, CFHT1843LS4, CFHT1843LS5, CFHT1843LS6, CFHT1843LS7, etc.
  • Kelvinator: KATR1816MS0, KATR1816MS1, KATR1816MW0, KATR1816MW1, etc.
  • Tappan: TRT15L2JW0, TRT15L2JW1, TRT15L2JW3, TRT15L2JW4, etc.
  • White Westinghouse: WRT18MP5AWI, WRT18MP5AWO, WRT18MP5AWX, WRT18MP5AWY, WRT18MP6CSI, etc.

This list is not exhaustive. If your specific model is not listed, please verify compatibility using the part numbers or consult a technician.

6. Configuración e instalación

The following steps outline a general procedure for replacing an evaporator fan motor. Specific refrigerator models may vary. Always refer to your appliance's service manual for detailed instructions.

  1. Desconectar a enerxía: Unplug the refrigerator from the electrical outlet or turn off the circuit breaker to the appliance. This is a critical safety step.
  2. Access Freezer Compartment: Open the freezer door. You will typically need to remove shelves, ice maker components, and the rear panel of the freezer compartment to access the evaporator coil and fan motor.
  3. Locate the Evaporator Fan Motor: The motor is usually mounted near the evaporator coil, often behind a protective cover.
  4. Desconectar o cableado: Carefully disconnect the electrical connectors from the old fan motor. Note the orientation of the wires if they are not color-coded or keyed.
  5. Retirar o motor antigo: Unscrew or unclip the old motor from its mounting bracket. Be careful not to damage the fan blade, which may need to be transferred to the new motor.
  6. Instalar motor novo: Attach the new INGQI evaporator fan motor to the mounting bracket. Ensure it is securely fastened. If applicable, transfer the fan blade from the old motor to the shaft of the new motor, ensuring it is correctly oriented and secured.
  7. Conectar cableado: Reconnect the electrical connectors to the new motor. Ensure all connections are firm.
  8. Remontar: Replace the rear panel, ice maker components, and shelves in the freezer compartment.
  9. Restaurar enerxía: Volva conectar o frigorífico á toma de corrente ou active o disyuntor.
  10. Proba de funcionamento: Listen for the fan motor running and check if the refrigerator and freezer are cooling properly after a few hours.
INGQI Evaporator Fan Motor with wiring harness
Figura 1: Fronte view of the evaporator fan motor with its wiring harness and connectors.
De volta view of the evaporator fan motor showing specifications
Figura 2: Traseira view of the motor, displaying technical specifications and model numbers.
Lado view of the evaporator fan motor with shaft
Figure 3: Side perspective of the motor, highlighting the shaft where the fan blade attaches.
Evaporator fan motor with wiring and ground wire
Figura 4: Outra view of the motor, showing the complete wiring assembly including a ground wire.
Evaporator fan motor with mounting points
Figura 5: detallada view of the motor, emphasizing its mounting points and overall construction.

7. Principios de funcionamento

The evaporator fan motor is a crucial component in a refrigerator's cooling system. Located in the freezer compartment, its primary function is to draw air over the evaporator coils. These coils contain refrigerant that absorbs heat from the freezer and refrigerator compartments, thus cooling the air. The fan then circulates this cooled air throughout both compartments, maintaining consistent temperatures and preventing frost buildup on the coils. A properly functioning evaporator fan ensures efficient cooling and optimal performance of your appliance.

8. Mantemento

To ensure the longevity and efficient operation of your refrigerator and the new evaporator fan motor, consider the following maintenance tips:

  • Manteña as bobinas limpas: Periodically clean the condenser coils (usually located at the back or underneath the refrigerator) to improve efficiency and reduce strain on the cooling system.
  • Check for Ice Buildup: If you notice excessive ice buildup on the evaporator coils or around the fan, it may indicate a defrost system issue or a problem with the freezer door seal. Address these issues promptly to prevent damage to the fan motor.
  • Escoita ruídos pouco comúns: A healthy fan motor operates quietly. If you hear grinding, squealing, or excessive noise, it might indicate a failing motor or an obstruction.

9 Solución de problemas

If your refrigerator or freezer is not cooling correctly, or if you suspect an issue with the evaporator fan motor, consider these common problems and solutions:

  • Refrigerator/Freezer Temperature Rises: This is a primary symptom of a failing evaporator fan motor. If the motor is not circulating cold air, temperatures will increase.
  • Coils are Frozen: If the evaporator coils are completely covered in ice, the fan cannot effectively move air. This could be due to a faulty defrost system or a non-functioning fan.
  • O ventilador non funciona: If the fan motor does not spin when the freezer door switch is engaged (or when the door is closed), it may be faulty.
  • Loud Noises from Freezer: Grinding, buzzing, or squealing sounds from the freezer compartment can indicate worn bearings in the fan motor or an obstruction hitting the fan blade.

If troubleshooting steps do not resolve the issue, it may be necessary to replace the motor or consult a professional technician.

10. Garantía e soporte

This INGQI evaporator fan motor replacement comes with a satisfaction guarantee warranty:

  • Refund Period: 30 días desde a data de compra.
  • Período de substitución: 3 meses desde a data de compra.

For any problems, questions, or support needs, please contact INGQI customer service. We are committed to resolving any issues you may encounter as quickly as possible.

11. Exención de responsabilidade

This product is an aftermarket replacement part. It is not manufactured by the original equipment manufacturer (OEM) but is designed to be 100% functional and compatible with the specified models. Always ensure proper installation and adhere to all safety guidelines.

Documents - INGQI – 241854301,5303918549

sen documentos relevantes